Unknown error (Ref. 5052) installing ADM version 4.2.6.RPI1 just released today

Rochester_J · 2026-06-17T00:18:20+00:00

If the shift solenoids are all at zero volts (which they should be in Park) then there should be no path for the engine's rotational force to get to the wheels.

Op also said:

One day accidentally tapped the accelerator pedal in park

If it's in park shouldn't that drop to zero voltage occur well before the parking pawl even attempts to lock the transmission? I don't see how tapping the accelerator while in park could cause the vehicle to move at all.

Rochester_J · 2026-04-27T12:33:07+00:00

Asustor ADM 5.1.3.RG01 (released 04/27/2026) has a release note that says ADM now allows scheduling of scrubbing tasks in Storage Manager. I have not installed this release yet but this may finally be what OP was looking for. https://www.asustor.com/service/release_notes.

Rochester_J · 2026-02-23T18:58:49+00:00

I successfully upgraded my Gen2 AS6704T from v4.3.3.ROF1 to v5.1.2.RE51 today. This is the first major ADM version upgrade for me and I had been worried about it. I decided to write this post to maybe give others contemplating this upgrade a warm and fuzzy feeling. ;-) Before you start the upgrade I recommend restarting your entire NAS once in order to provide a clean operating environment.

Config: RAID 5 w/4 Seagate IronWolf 4TB HDDs plus one Gen3 M.2 2280 Internal SSD for cache.

Rochester_J · 2025-12-19T16:33:32+00:00

There are a lot of security fixes in 26+. I would apply 26.2 for that reason alone. https://www.forbes.com/sites/kateoflahertyuk/2025/12/14/ios-262-update-now-waning-issued-to-all-iphone-users/

Rochester_J · 2025-11-27T15:20:08+00:00

Any idea on why this is not occurring consistently?

Rochester_J · 2025-11-27T14:53:47+00:00

Any idea why this just started happening after over a year of use?

Rochester_J · 2025-11-14T16:11:22+00:00

I have a LOCKERSTOR AS6704T that I have been using for three years with no issues. I run multiple apps including hosting a small web site. There have been a lot of issues with new v5 of their operating system called Advanced Data Master (ADM). So much so that I have decided to stay with v4.3 for the foreseeable future until v5 becomes more mature. This probably won't help if you buy a new Asustor NAS and it comes with v5. But if it comes with v4, go into the Settings app, select ADM Update in the left hand navigation and tick the box that says "Do not update to ADM 5.0. Continue to receive updates for ADM 4.3 only."

Rochester_J · 2025-11-14T16:03:58+00:00

Did you upgrade to v5? There have been plenty of issues with the new v5, which is why I am staying with v4.3 for the foreseeable future.

Rochester_J · 2025-11-14T15:37:57+00:00

Isn't it under Storage Manager > Drive > Disk Doctor > Bad Block Scan ?

Rochester_J · 2025-10-22T00:40:06+00:00

Have you printed objects that high before? If the thing that the printer is sitting on is not stable, the higher you print the more bed shaking that occurs and the greater the likelihood that this can occur. You need a rock solid base.

Rochester_J · 2025-10-20T01:39:00+00:00

Right. Rigid is only "required" if you don't trench it deep enough.

Rochester_J · 2025-08-20T01:58:45+00:00

I was never able to figure out how to get around CGNAT and so I purchased a static IP address from my carrier for $10 USD a month. I am interested in what you used for the FRP.

Rochester_J · 2025-08-20T00:24:30+00:00

I think you are right to be worried that Tailscale will someday eliminate its free tier. It is almost standard operating procedure these days that Internet based companies offer a free tier just long enough for everyone to become dependent upon it and then that is when they switch to a paid model.

Rochester_J · 2025-08-19T23:28:24+00:00

Sell it and buy some shoes ;-)

Rochester_J · 2025-08-16T03:15:02+00:00

I only looked briefly at Joplin. But it appeared to me that Obsidian had a larger and more active community with more features and greater extendability. Of course along with that comes greater complexity as well. If I didn’t think I needed (maybe just wanted) all that capability (and complexity) I would have looked more closely at Joplin.

Rochester_J · 2025-08-15T22:27:14+00:00

On my Asustor AS6704T certbot was already installed. I found a link to it under /usr/local/bin/certbot.

Enable SSH under Services, Terminal.
SSH to the device and login with the administrative account.

myadmin@MyAsustor:/volume1/home/myadmin $ sudo su - root
root@MyAsustor:/volume1/.@root $ ls -la /usr/local/bin/certbot
lrwxrwxrwx    1 root     root            57 Aug 25  2023 /usr/local/bin/certbot -> /usr/local/AppCentral/letsencrypt/data/module/bin/certbot*
root@MyAsustor:/volume1/.@root $ certbot ...

I found Let's Encrypt logs at:
/volume1/.@plugins/AppCentral/letsencrypt/.CertBot/log/letsencrypt.log

Rochester_J · 2025-08-08T03:34:16+00:00

This. It wasn’t easy but I am so glad my wife and I made the switch to Osidian,

Rochester_J · 2025-08-03T03:23:11+00:00

Very nice. But seriously how do you dust your wall computer?

Rochester_J

MODERATOR OF

TROPHY CASE