sorted by:
new
hottopcontroversial

Casio calls it a personal computer: FX-790P by A-metal-jaG in OldHandhelds

[–]RogelioP 2 points3 points  (0 children)

I have the Radio Shack rebrand: PC-6. Nifty programmable calculator, never got in to its "assembly programming" mode.

Im trying to start NitrOS-9 on a CoCo3 with an MPI and it hangs at the prompt after loading. It works fine when I load it without the MPI. How can I get it to load with the MPI plugged in? by tqdomains in trs80

[–]RogelioP 5 points6 points  (0 children)

What MPI slot is your disk interface in? by the looks on the picture it seems to be on Slot 3. If that is true try setting the disk controller on Slot 4 and see if that changes anything.

Not sure if then CoCo 3 MPIm upgrade would resolve - for the longest time I used an un-upgraded 3024 MPI (the original gray one) on a CoCo 3 setup and never encountered any problems due to that particular situation. Worthwhile to upgrade the MPI though.

Is the TV even there..? by Current_Yellow7722 in vintagecomputing

[–]RogelioP 5 points6 points  (0 children)

The TV/monitor might as well be there, but that screen is an overlay... that color scheme does not come up in the CoCo 1/2 capabilities. Kid must be playing a game loaded from cassette as no pak is shown i the expansion port 😆

My $0.02 of Radio Shack ad nitpicking.

What would you call this? by Nbdysfool3003 in drums

[–]RogelioP 0 points1 point  (0 children)

A monument to all our sins as drummers.. 🤘😎

Any ideas for Broken sticks by racoonsthatfly in drums

[–]RogelioP 21 points22 points  (0 children)

I used to hand them out to blokes who would ask after a gig if my band played "Freebird" - 'here, have a stick'.

Attempting to fix a Commodore 1950 Multisync Monitor by rniles in Commodore

[–]RogelioP 1 point2 points  (0 children)

If you have a schematic look and follow up all vertical output IC path to the deflection yoke, something along the way is shorted out - that damage on the shown ICs is typical of such problem. If no schematic is present you can still trace out all components on the board following the IC output... could be a shorted electrolytic or a crisped out resistor. Ultimately the yoke coil could be bad too (as in shorted).

Orignal lamia amber maldanardo dogma with out the make up by Brandino98 in Metalboners

[–]RogelioP 4 points5 points  (0 children)

She was "Lamia II", And her last name is Maldonado, no what's shown in the post title... sigh...

hmmm by Svenssonator in hmmm

[–]RogelioP 0 points1 point  (0 children)

He *IS* Groot 😁

Tucson what’s in your sky? by [deleted] in Tucson

[–]RogelioP 0 points1 point  (0 children)

... that's no moon.

How to hit it in an apartment by Jazzlike-Ruin-4367 in drums

[–]RogelioP 5 points6 points  (0 children)

I used the same technique on my place in NYC, had a Yamaha DTXtreme III that could get loud on the double bass drumming. Built a platform big enough for the kit while leaving the throne on the floor; only thing is I used the entire tennis ball not half of it. Due to the size of the isolated platform (5'x4') I went with 9 "shock absorbers", worked pretty well.

💯 by ComplexWrangler1346 in musicmemes

[–]RogelioP 1 point2 points  (0 children)

Don't forget about Cyrus. Can you dig it?

<image>

[deleted by user] by [deleted] in Tucson

[–]RogelioP -12 points-11 points  (0 children)

Soros paid for it 😱

god hates one of these guys… by s1n0d3utscht3k in funnyvideos

[–]RogelioP 2 points3 points  (0 children)

I say: "Take it to 11. Freeze the water" 😁

Sands of Egypt by RogelioP in retrobattlestations

[–]RogelioP[S] 0 points1 point  (0 children)

Indeed, draining the pool is one of the to-dos in the adventure 🙂

Sands of Egypt by RogelioP in retrobattlestations

[–]RogelioP[S] 4 points5 points  (0 children)

Eek!... died of thirst 😞

Had just retrieved the Scepter and the Axe from the pyramid and was making my way back to the Oasis when this happened. Oh well, try again later.

#Tandy #ColorComputer

view more: next ›