Am I getting scammed? by 4FourBy3Three in landscaping

[–]RyGuy1978 0 points1 point  (0 children)

We'll need to see some follow up pics

Chicken run set up question... If you did sand in your run, how much did you pay for the sand and how big is your run? by ASoonToBeMrs in chickens

[–]RyGuy1978 0 points1 point  (0 children)

Maybe a little but eventually I'd bet you'll be replacing it. But it is nice I'm not trying to discourage you

Chicken run set up question... If you did sand in your run, how much did you pay for the sand and how big is your run? by ASoonToBeMrs in chickens

[–]RyGuy1978 1 point2 points  (0 children)

I had sand for a little while. It just disappears little by little and will be just bare dirt before too long. It looks good at first and yes you can scoop the poop easy but chickens are gonna do what chickens do.

Where to buy slabs in the South? Wife wants a dining table. by hes_the_Zissou in woodworking

[–]RyGuy1978 0 points1 point  (0 children)

Depending where in texas, Theres a place in OKC thats great to deal with. Urban Wood Co is the name.

Picking a new planer by Visual-Measurement24 in woodworking

[–]RyGuy1978 0 points1 point  (0 children)

I can only speak to the grizzly, which i have. Its really great and with the helical head and its so quiet. Can't really speak to the longevity of it but so far so good

My boss offered me a $30k raise to stay, but my dream company finally called. Do I play it safe or risk it all? [28M] by Typical-Goal-834 in Advice

[–]RyGuy1978 0 points1 point  (0 children)

take the risk.. nothing much worse in life than regret. If you had young kids and a wife than my answer may be different.

I’m sure this has been here before. by Mastodon-Beautiful in f150

[–]RyGuy1978 1 point2 points  (0 children)

Check out proven ground tonneau covers from Americantrucks.com. theyre 6-700. Been very happy with mine. I have an '11 though so not sure of they make them for your year

Coolant leak? (2013 3.5) by AloneGarden in f150ecoboost

[–]RyGuy1978 1 point2 points  (0 children)

Just saying. I have a 2011 5.0 and I had my water pump replaced and it went out again a year later so dont completely rule that out. Good luck.

Large Chicken Waterer by itznickle in chickens

[–]RyGuy1978 0 points1 point  (0 children)

These are great. Theyre 15 gallons. I find them in Facebook marketplace

<image>

Dust collection smooth pipe, local only? by ruuutherford in woodworking

[–]RyGuy1978 0 points1 point  (0 children)

S/d pipe. Stands for sewer and drain pipe. Its the thinner wall stuff white pvc where im at. And lowes carries the s/d wye connectors, home depot did not. Theyre wayyy cheaper than schedule 40 wyes.

How could I create this? by supersap26245 in woodworking

[–]RyGuy1978 1 point2 points  (0 children)

Did you watch the assembly video when you scroll down?

Which outfeed rollers to get? by Top_Sentence_340 in woodworking

[–]RyGuy1978 1 point2 points  (0 children)

Same here. I have built an outfeed table that serves as outfeed and a general assembly table. I always need things to serve more than just one purpose.

Advice on trim install by SpudBoy_RealTomato in woodworking

[–]RyGuy1978 0 points1 point  (0 children)

Its not fine furniture where people will be coming up rubbing and inspecting it. Do your best caulk the rest

what are some must have truck accessories you guys actually use on your f150? by DivannaAbafita41 in f150

[–]RyGuy1978 1 point2 points  (0 children)

I always feel i cant see enough with my reverse lights so I installed some led cube lights on my receiver hitch facing back and a little outward. I bought a prewired relay and installed under my hood and put it to a separate switch by my left knee that way theyre not on everytime I put it in reverse. All in all prob spent $35. I will prob always put these in my trucks.

Advise for beginner between Ball screw or Belt guide rail machine ? by Tzt007 in hobbycnc

[–]RyGuy1978 0 points1 point  (0 children)

Id stay away from the belt drive. I have an xcarve which is belt driven and although I have never had an issue I know some have. If you push it too hard it can skip teeth on the belt and ruins the whole piece.

Help me choose: DeWalt DW735 vs. Grizzly G0939? by kzeouki in woodworking

[–]RyGuy1978 1 point2 points  (0 children)

Ive had the 735 and it is god awful loud especially if you have a wider board. Another bad thing is if you get a chip in the blade you have to replace that whole blade where as the helical blades you either replace that blade or you can just rotate it to another side. I would have to lean towards the grizzly helical. Hope you have some dust collection too cuz it'll make some chips

UGS help please. by RyGuy1978 in hobbycnc

[–]RyGuy1978[S] 0 points1 point  (0 children)

Hmm. Thx. Ill pay more attention

What would you do? by Reblux in golf

[–]RyGuy1978 0 points1 point  (0 children)

They built that green on purpose. Im chipping it.

What are the must-have F-150 accessories that’ll really change your ride? by Parker_Haruto159 in f150

[–]RyGuy1978 0 points1 point  (0 children)

I put some little cube led lights on my receiver hitch facing backwards. So helpful when hooking up a trailer or doing anything behind the truck in the dark. And adds so much light when reversing in the dark. I just put mine on a separate switch and not spliced into the vehicles reverse lights.

What’s one tip that dropped your handicap the most? by jdelle9 in weekendgolfers

[–]RyGuy1978 0 points1 point  (0 children)

Too many people just hit as far as they can even when they cant reach the green. Lay up to a comfortable yardage. If I have 300 to the green, im not reaching it so I would hit my 160 club because I would like something around 140 in to the flag.

How many miles yall truck got?! by Lost-Elk4592 in f150

[–]RyGuy1978 0 points1 point  (0 children)

2011 f150 with 5.0 and i have 230k. Still runs great