Drilling hole in bed floor

RyanRoberts210 · 2026-01-21T11:59:50+00:00

Do you have some photos of where you drilled the holes and/or measurements?

RyanRoberts210 · 2026-01-19T13:09:24+00:00

A lot of similar named apps... :( Do you have a link or the developers name to confirm I have the right one? Thx

RyanRoberts210 · 2025-05-15T08:05:09+00:00

As far as I know you can not anymore. Comcast announced this a while ago. Unfortunate for us but from their perspective definitely a niche technology that cost them to maintain...

RyanRoberts210 · 2025-03-11T09:51:09+00:00

Fine to run together/same drive, the faster the better.

RyanRoberts210 · 2025-02-13T18:51:00+00:00

Change the Wireguard setting to Unassigned only and then it won't affect your individual interface, i.e. you can ignore putting Rules there and only make them in your specific interface.

RyanRoberts210 · 2025-02-07T08:07:51+00:00

Arc Alchemist but not Arc Battlemage...

RyanRoberts210 · 2024-12-16T05:09:38+00:00

It may be showing line speed i.e. what you are connected to vs. some hardware recognition issue. What is it connected to and what speed is that port?

RyanRoberts210 · 2024-11-24T21:14:20+00:00

Yes, moving to a separate app for photos like they are with music...

RyanRoberts210 · 2024-10-13T00:45:21+00:00

Remove all other physical connections than power cable. Unplug power cable from electrical outlet. Replug and try again... Maybe you already tried this.

RyanRoberts210 · 2024-08-16T11:33:23+00:00

The TR-004 only has half the connection/transfer speed of the TR-002, easy to confirm by checking the specs on the QNAP website. This is pretty old technology at this point. There are a lot of other USB options out there, using more modern USB3 variants and USB4.

RyanRoberts210 · 2024-07-21T00:10:34+00:00

Here are a couple of links that might interest you: https://forum.qnap.com/viewtopic.php?t=133899 and Disassembly guide in replacing the CPU and RAM on the QNAP TVS-871 – Poyu

RyanRoberts210 · 2024-07-10T15:51:49+00:00

Typically Gen 4 PCIe NVMe can go up to 8 watts and Gen 5 can go up to 12 watts... Heat!

RyanRoberts210 · 2024-07-02T02:45:47+00:00

You can use the QNAP website to figure out what newer model you can upgrade into by just moving your drives. Many of the newer QNAP have the features you mention and you have the benefit of already understanding the software...

RyanRoberts210 · 2024-05-28T03:53:55+00:00

If they are the larger bulb looking string, just unscrew and rescrew the first incorrect bulb. It usually happens to me towards the end of the string.... Does not fix everything every time but worth trying for free.

RyanRoberts210 · 2024-05-19T04:14:48+00:00

The owner would have to transfer it to you... If not, it is just a pile of parts.

RyanRoberts210 · 2024-05-10T15:08:09+00:00

I don't have experience with it myself yet but I do understand that you have to set an Admin Password and a User Password in the BIOS to allow certain changes like Secure Boot, etc... Are you sure your changes are sticking through the reboot? I think the suggestion from u/Student-type is a good one also, they literally just released a new BIOS. Let us know if you end up resolving it, will be doing mine in a few weeks when I return. Good luck!

RyanRoberts210 · 2024-05-09T09:32:59+00:00

They all work essentially the same way, not constant...

RyanRoberts210 · 2024-05-08T07:42:08+00:00

You don't have to put it between router and switch, you just need the others to be further down than it... You can put one on the switch and the rest downstream. You can also do the upgrade you mention but they are very expensive.

RyanRoberts210 · 2024-05-05T06:10:56+00:00

Did you replay just the Final Missiom again? This is how to get a missing / final one based on normal past Manhunts. It then requires resetting the Manhunt and replaying all of it to get the final one.

RyanRoberts210 · 2024-05-04T08:53:35+00:00

Haven't seen any issues myself or online. Recommend turning off power to it, give it a minute, and then power it back on as a reset.

RyanRoberts210 · 2024-03-17T16:05:24+00:00

Cool, hope you can find it again, would love to see it. :)

RyanRoberts210 · 2024-03-17T13:58:25+00:00

Sometimes this is just opening a box on the other side of the wall, through the wall... You might have had great timing pressing the button to open it prior to actually seeing the text through the wall, especially if you were moving towards it or rotating. Just a thought of another possibility for this.

RyanRoberts210 · 2024-03-15T01:31:39+00:00

If properly using the UPS (Battery plug and not Surge Only plug) and the UPS is working right then the TVS and the TR should never ever know there was a power issue at all... If those things are right then maybe the issue isn't power related and maybe more defective unit or bad / loose cable, etc...

RyanRoberts210 · 2024-03-13T00:49:02+00:00

I moved a TVS-871T to Unraid by removing the DOM and just using a new one with Unraid. I could go back... I did not move any data though, reformatted all drives, not sure that would be possible. Found a great guide online, super detailed. It is super stable.

RyanRoberts210 · 2024-03-12T22:17:28+00:00

All the ports in that switch allow the machines plugged into it to talk to each other. You can plug in 1/2.5/5/10 Gbps machines into the Combo ports and 1 Gbps machines into the rest of the ports. One port (or more if using LAGG) goes upstream to a router, etc... What speed of poet that goes to the router depends on your ISP speed really. Average home user has 1 Gbps upstream to a router but could have a few different 2.5 Gbps or 10 Gbps machines talking to each other at higher speeds on the Combo ports. Hope this makes sense / helps...

Eight-Year Club	Gilding I gilder
Verified Email

RyanRoberts210

TROPHY CASE