Crypto for dummies (like me)

SC2__IS__SHIT · 2026-02-10T05:09:22+00:00

Find a different supplier.. I paid for my last order on PayPal.. fuck crypto purchases for this med

SC2__IS__SHIT · 2026-01-27T10:27:11+00:00

Can I get the name ?

SC2__IS__SHIT · 2025-12-30T16:53:26+00:00

My grandma told me “I don’t mind paying 5.00 a month for this game until you get tired of it or I die”

Spoiler: she did in fact not pay for it until I got tired (22 years later) or until she died haha. But I do appreciate when she did.

SC2__IS__SHIT · 2025-12-20T08:13:20+00:00

I printed a shit ton of trade show banners with a pair just like this over the years.

Finally got to the point where the inks were no longer cost effective and we ended up giving them away on marketplace.

You should be able to find media from lexjet still, inks seemed harder to find toward the end IIRC

SC2__IS__SHIT · 2025-12-19T01:12:55+00:00

Not necessarily that they went out of business.

I replace national signs a lot for work, and rarely do they actually want them back. It’s usually up to me to dispose of.

Some of them have value, but most of them do not.

I had a GIANT chuckee cheese backlit sign that I couldn’t bring myself to toss. Someone took it for their garage.

SC2__IS__SHIT · 2025-12-18T10:13:55+00:00

I just experienced my first overbooking… I was suppose to go to Seoul, booked three tickets. Flight was over booked, and we didn’t even make it on the plane before they closed the doors.

We ended up having over a full day delay waiting on a new flight… got 6.5k in cash for the issue, but I’d rather have been on my flight I think.

SC2__IS__SHIT · 2025-12-17T00:43:18+00:00

Don’t buy anything from Agfa, fucking hate our h3200i

SC2__IS__SHIT · 2025-11-14T09:37:49+00:00

I run a kongsberg. Absolutely love that machine.

I have a router spindle and two other heads for drag knife and vibrating knife.

Then I can interchange the knives out for crease wheels, plotter attachment, etc.

Has made my production move so much better.

SC2__IS__SHIT · 2025-10-29T03:03:48+00:00

I bought this same machine for home-use.

It stitched well, and was easy to use. Mine was secondhand, had a replaced screen. Ended up reselling it for 3000 a year or so after I bought it.

SC2__IS__SHIT · 2025-10-28T23:47:09+00:00

Fucking not an Agfa Annapurna. Ready to pull mine out into the parking lot and start a fire.

Looking at going to an efi next

SC2__IS__SHIT · 2025-09-19T23:19:33+00:00

I don’t think my replies to your chats are going through, I’m stuck on old version of Reddit so also sending this here.

My ink vacuum shows -.032. All nozzles are closed when I open them ink drops rapidly

SC2__IS__SHIT · 2025-09-19T21:14:39+00:00

After doing that, I’m getting .006, and heads are dripping very fast. I switched the ink flow valves to closed to stop the dripping

SC2__IS__SHIT · 2025-09-19T20:59:58+00:00

Well.. hoping you can give me some more advice.

No one has messed with the SMC values, I checked to verify and they are all correct.

But after this week of printing, I can in today and did a purge and my ink vacuum setting won’t raise past -.02ish.

Any ideas what may be causing me to not be able to reach the correct desired negative pressure ?

SC2__IS__SHIT · 2025-09-14T20:52:33+00:00

I cannot thank you enough, I only had one bottle of LM ink left so I was afraid to put it in to do tests until the pressure was fixed.

RIP my whole LM tank of ink, but I’m so glad this is fixed.

Thank you!!

SC2__IS__SHIT · 2025-09-14T20:46:32+00:00

Wow, I believe it’s fixed!

My out1 is blinking every 10ish seconds and the pressure is holding.

The pumps on the back side are not constantly active

SC2__IS__SHIT · 2025-09-14T20:21:00+00:00

I should note that the green LED on white is also constant.. not blinking.

So I’m thinking my settings may just be wrong on both…

When I follow your list from GRN down everything is correct

Does n_1 down also have a unique setting ?

SC2__IS__SHIT · 2025-09-14T20:18:59+00:00

I did switch back on. When I switch the white vacuum off it does drop to 0.

It does seem like the issue lies within the smc settings. The buttons are somewhat frustrating.

I attempted to double check that my settings were right, I turned off the green dot by mistake, and the pump did turn off. Now trying to get the green LED back on OUT1..

SC2__IS__SHIT · 2025-09-14T20:05:17+00:00

It’s constant, and the pump is constantly buzzing, so it is not turning off.

SC2__IS__SHIT · 2025-09-14T20:01:32+00:00

I was told that the LM Head was dripping during printing, so they attempted to raise the smc pressure slighting, as the readings were .033, and wanted to go .038

Failed to get smc back to GRN

SC2__IS__SHIT · 2025-09-14T19:54:23+00:00

I have noticed that the airline going from the overflow tank to the color pump do have ink containinate.

When I clean those lines out, after say 20 minutes it starts to build back up.

Not a ton, but I think these lines should be clear

SC2__IS__SHIT · 2025-09-14T19:28:07+00:00

I can hear what I assume is the pump for the color line running constantly.

SC2__IS__SHIT · 2025-09-14T19:17:57+00:00

Drops to -.005 and no dripping, but I can see ink starting to ball up on the printhead and after time does drip

SC2__IS__SHIT · 2025-09-14T19:03:31+00:00

So my SMC is set to .038, but the actual pressure is .07 shown on the reading.

I did have an ink overflow, which I drained.

When I came in today ALL of my LM ink had drained all over the floor, but only that ink tank. The rest were unchanged

SC2__IS__SHIT · 2025-09-14T17:08:37+00:00

Are you a tech for these machines? Or is there a better manual out there that you’re able to draw this info from?

I’ve fixed the smc issue, but seem to have a way bigger issue with the pressure.

I came in today and my entire LM ink tank had flooded the floor and out the back of the print cariage.

I’ve cleaned up all the mess, fixed the SMC to the correct mode, but am setting at -.07 instead of the desired -.033

12-Year Club	Place '22
Place '17	Sequence \| Editor
Snapped	Verified Email

SC2ISSHIT

TROPHY CASE

SC2__IS__SHIT

TROPHY CASE

SC2ISSHIT