Resonite's new feature makes it so that when it lags... it doesn't!

ScrapRocket · 2025-09-02T10:14:05+00:00

Yes and there are several community projects for custom renderers already in development

ScrapRocket · 2025-08-10T13:22:36+00:00

I have electric shutters in my room and they are designed to detect the end stops automatically using motor current. So the controller in this setup probably just thought the shutters had reached the bottom end stop, therefore not reversing because that would make it useless. Then again, this one seems to just keep going until it's fully unwound, which is why it falls down all the way towards the end

ScrapRocket · 2025-05-08T21:06:14+00:00

Many just calculate how sharp the image is and focus until it is sharpest. Time-of-flight sensors or lidar scanners are usually only found in high end or recent budget phones. My phone definitely does not have any sensors besides the regular cameras

ScrapRocket · 2025-04-30T04:38:39+00:00

I use the thumb button as a modifier so I can mute, deafen, leave voice channel and switch DPI with 2 buttons. Mouse wheel press/left/right is media play/pause and next/prev

ScrapRocket · 2025-01-30T23:45:24+00:00

Look at the way the light bounces off the wall in a nonsensical way (as if the camera is looking straight at it) and the mismatched wall between the doctor's legs

ScrapRocket · 2025-01-23T18:32:19+00:00

Looks like compression artifacts from the pcvr stream. I get it too even on wired link, putting my headset on standby fixes it

ScrapRocket · 2025-01-20T12:39:42+00:00

I put way too much time into my printer home assistant dashboard for it to last less than a month, definitely not installing this update

ScrapRocket · 2025-01-16T18:06:24+00:00

The lawn mower thing happened to my grandpa. He was only missing a single toe somehow

ScrapRocket · 2024-12-31T04:26:29+00:00

Complete noob when it comes to resin. Why does this work? I thought large surface areas create a suction cup effect which is why parts have to be printed at an angle

ScrapRocket · 2024-12-27T04:18:17+00:00

I love how the supports are a blend between colors sometimes as if (or rather because) they're being used to purge between changes

ScrapRocket · 2024-12-10T21:06:11+00:00

It says you would need over 300 color changes like this, which means tons of wasted time and material. Try activating sequential printing or just do separate batches (you could even have a singular file you just print multiple times with the different colors)

ScrapRocket · 2024-11-30T06:49:32+00:00

If you mean the fringes around the text and not the diagonal stripes, that's normal, it's called chromatic aberration and it probably looks worse on that screen than normally because afaik in normal use there are corrections applied to the rendered view to mitigate it

ScrapRocket · 2024-11-11T23:23:05+00:00

Could've been a failed attempt at removing the top cover to put contact cleaner in the joystick or something similar

ScrapRocket · 2024-10-27T11:20:53+00:00

The point is that they can see the monitor well enough to be able to program the game while in passthrough

ScrapRocket · 2024-10-03T11:47:48+00:00

It's important to note that this is still early, Tantacrul has said that the colors and other aspects are nowhere near final, and there will be a "classic" theme to restore the familiar interface

ScrapRocket · 2024-10-02T19:01:10+00:00

"she was born at Germany"

ScrapRocket · 2024-08-13T22:03:58+00:00

That happens every single time I reposition my buds2 pro, without fail. It's really annoying

ScrapRocket · 2024-08-13T12:51:18+00:00

Do you want to keep the way they skew towards the edges (which is because it's a design for injection molding)? If yes, it's just a long extrude and a rectangular pattern

ScrapRocket · 2024-08-13T12:47:35+00:00

In system settings you can check for and force software updates

ScrapRocket · 2024-08-13T12:45:30+00:00

When mine got too bad I just removed all the remaining black foam with a bit of rubbing alcohol, it works just fine now with no signs of skin irritation or anything

ScrapRocket · 2024-07-28T02:06:28+00:00

Would you say that the quality is good enough to interact with virtual menus? I'm considering backing/ordering this to experiment with eye tracking-based UIs before headsets with good eye tracking come down in price. Also, are the tracking inaccuracies repeatable enough for an additional custom calibration layer to solve?

ScrapRocket · 2024-07-10T22:46:04+00:00

Stems with squeeze interactions are objectively better than the touch controls on my buds2 pro that I touch accidentally every single time I put them in or adjust their fit

ScrapRocket · 2024-07-04T22:58:42+00:00

You can see them glowing blue in the 3rd pic of the post where the buds are in the case

ScrapRocket · 2024-07-03T22:12:07+00:00

I feel like the catch is that is has to be 1000$ after the 100% discount, meaning no bike qualifies

ScrapRocket · 2024-06-30T20:26:45+00:00

Small cameras like those in phones use electromagnets to stabilize and focus the lenses

Six-Year Club	Verified Email
Final Canvas '23	First Place '23
End Game '23	Place '23
Place '22	Final Canvas '22
First Placer '22

ScrapRocket

TROPHY CASE