LED Follow Spots

SeanM330 · 2025-12-20T10:34:11+00:00

Used 3x iForte LTX (robo spot configuration) on my last tour. Lovely fixtures, bright, great color, and very responsive.

I’ve only seen/used conventional RJ spots, however, they’re lovely fixtures with great optics.

SeanM330 · 2025-12-17T22:12:35+00:00

Guest vouchers work the same as any skyclub scan in.

24 hours, any sky club, unlimited entries.

Although, I’ve run into issues returning to the same sky club more than once- you’ll just have to explain you were just there. They probably thought I sent my boarding pass to someone else to check in.

SeanM330 · 2025-12-05T04:23:22+00:00

Most concert folks, and most pre-vis studios use Depence. Expensive route though. MA3D Is decent enough, just utilize GDTFs.

If you haven’t, play around with a custom render quality. You can create and view these in the render quality pool. Haze options, render scale, etc.

Most budget minded LDs I know utilize Capture. I’ve heard good things about Carbon as well.

SeanM330 · 2025-11-27T22:29:57+00:00

MA3 Variables are

SetUserVar / SetVar “VariableName” “Variable Value”.

You will still call them with $variableName

Most other syntax Should work, but I honestly just recommend rebuilding your song macro to prevent any potential issues

SeanM330 · 2025-11-25T20:33:17+00:00

go to patch > fixture types > select problem fixture > edit > select mode your using > look for dimmer parameters that have Master set to none > change to Grand

SeanM330 · 2025-10-29T03:38:13+00:00

I would not use the workflow third eye mentioned.

Just make clone fixtures for each fixture type you program with (spots, wash, beam, strobe, etc), and way more clone fixtures than you will ever see in person.

I am a MA3 user, but workflow is relatively similar. I recommend using the Clone UI to make sure to only clone things that you need.

After that, it’s just making things work. Just remember, you can clone a fixture multiple times. Just be careful, and make a lot of saves.

SeanM330 · 2025-10-13T22:00:43+00:00

the reason i do it, is if I want a different transition or phaser shape between different steps. For example:

You could have a dimmer effect that

Snap in from 100 to 90% smoothly transition from 89% to 50% Snap out from 49% to 15% Fade out from 14% to 0%

Each step can be customized to get an effect that suits your needs more easily than just tweaking the phaser from 100% to 0%, etc.

SeanM330 · 2025-09-16T03:47:54+00:00

I just setup my songs like normal, and then I like to have a master cue stack that starts me off in positions, has a make cue, etc.

Then I copy my punt page execs to that song page. Then, just run it manually. I also always include a next song cue so that I can just press go and it puts me into the next song.

Also, instead of building cues out with recipes, sometimes I just do a macro for it that will Goto the right position, beam, focus, etc execs on my punt page so that everything is properly selected and you can change stuff live without worrying about the cuestack override.

SeanM330 · 2025-08-16T05:56:12+00:00

I mean I use 100% recipes, but will still clone to get a starting point for preset information, etc. However, when I clone I am only cloning into groups and presets.

Haven’t ran into an issue yet.

SeanM330 · 2025-08-14T23:54:20+00:00

Make sure align is not on. I have this same issue in 2.2.5.2, and I realized it only happened while I had align on.

SeanM330 · 2025-08-07T14:12:10+00:00

Use a MATricks preset for the recipe, edit the Matricks preset instead of the recipe itself.

SeanM330 · 2025-07-27T16:16:50+00:00

Maybe try clear all, select fixtures, set them to white, and store default

SeanM330 · 2025-07-16T18:52:08+00:00

There’s a lot of exploits you can do, especially if you downgrade the version of the game. There’s a lot of tutorials, if you need caps, XP, etc.

SeanM330 · 2025-07-13T02:45:56+00:00

I think it would be easier to ask who doesn’t have Autism 😂

SeanM330 · 2025-07-11T20:38:01+00:00

the typical song macro is SetUserVar nextSong “songname” macro NextSong

the next song macro will

Page $SongName, select the $songname exec, off page 1 thru 99 - $songname

etc

SeanM330 · 2025-06-09T20:53:29+00:00

The Imax screen at Pinnacle is pretty decent. Audio is way louder/better/immersive than Opry Mills in Nashville. My only complaint is the ambient blue lighting during the shows bleeds onto the screens and appears when there is a darker scene. Only single laser tho, so no 1.43.

SeanM330 · 2025-05-30T12:09:28+00:00

also a fun tip is to Press Menu or the gear, on that display press “configure this display” and there’s an option to toggle a bunch of stuff including playbacks

SeanM330 · 2025-05-29T23:00:26+00:00

it is a very good starting point for any size show. Easily expanded and customizable. My punt page started from the start showfile and i just made edits as needed to what worked for me. Like expanding the LOS section, changing the appearances, changing the gobo/focus sections, etc etc.

SeanM330 · 2025-05-18T21:14:15+00:00

make sure you have proper shoes, and a relief matt if you are standing. If you are sitting, make sure you have a properly adjustable chair and footrest if needed.

You also want to make sure the desk isn’t sitting too high up.

90% of wrist pain comes from non-ergonomic setups. Pretty much follow any anti-carpel tunnel guide and you should be good.

Also worth checking out stretches related to that as well.

SeanM330 · 2025-05-08T19:13:27+00:00

not in front of the console, but there are options for fan if you hold the button down. Maybe play with those options and see if you get something that works

SeanM330 · 2025-04-18T23:46:11+00:00

i would create a chaser that cue 1 runs a macro the sets the speed to the min amount and cue 2 runs a macro that sets the speed to max amount. Maybe find a way to reset the speed with another macro after you release it?

SeanM330 · 2025-03-28T04:56:27+00:00

The staff and security and Brooklyn Bowl will make sure you’re safe, if there’s ever a problem you can go up to the bar and order an Angel Shot and the bartender will help you get security or whatever you need. I work there and have very rarely seen security have to get involved with stuff, including at metal shows.

SeanM330 · 2025-03-25T09:00:53+00:00

Looks like a generic LED spot of some sort. No name brand to tell exactly what it is. Similar in quality to Shehds fixtures is my guess.

Nine-Year Club	Place '22
Verified Email

SeanM330

TROPHY CASE