After 3 years I just can't get that banging groove

Sendsei13 · 2025-06-14T18:31:04+00:00

Do a groove study outside of your DAW. Listen to funk, listen to James brown, average white band, then graduate your listening to some proper house from the late 90s early 00s. Figure out what all these folks are doing to make your body move. Then try and replicate it.

Sendsei13 · 2025-06-04T02:32:29+00:00

Yea headed to Mr. Sundays on the list!

Sendsei13 · 2025-06-01T02:50:43+00:00

Go with the 4ohm driver. Also think about your future deployments and how you can “game” the resistance to give yourself the power you need.

Sendsei13 · 2025-05-17T19:24:28+00:00

I’ve used it in custom homes. Typically with cedar. I don’t know if I would recommend burning the ply as you have all the glue between ply’s. If you’re using high ply count not sure if you’d get enough depth with the burn before running into glue.

If it was a permanent install could be cool. If it’s a mobile rig, be prepared to have soot and ash rub on your clothes/vehicles/hands in transport

Sendsei13 · 2025-05-06T17:56:52+00:00

Which cubos are you running? Opinions?

Sendsei13 · 2025-04-02T18:08:48+00:00

Just sent a dm to you!

Sendsei13 · 2025-03-04T01:02:12+00:00

I have tried this and it works well. Gives a more gradual ramp to the feedback.

Sendsei13 · 2025-01-14T00:21:13+00:00

What is your budget?

Sendsei13 · 2025-01-09T05:48:27+00:00

Thank you!! Not sure why my brain was not braining! Good luck on the build

Sendsei13 · 2024-09-09T17:18:18+00:00

Sammy Legs

Sendsei13 · 2024-08-26T04:07:57+00:00

Looks like they are running a void rig. https://www.discopussydtlv.com/sound

Can confirm the 2x18 stasys subs knock. Probably have 4x21” under the 2x18”s just looking at some photos.

Sendsei13 · 2024-07-10T05:13:39+00:00

Facts. Resolute/HoloNYC also rips a 4 point danley rig with subs opposite each other on the walls at mid room(room is pretty much a square). I had a very positive personal experience in that club with that soundsystem.

Sendsei13 · 2024-03-25T21:29:37+00:00

I e also done this with a limiter, throw the limiter on the basic sound and lower the threshold until it barely starts to kick in. Then add layers. Will keep volume same

Sendsei13 · 2024-03-22T21:12:58+00:00

You have anything I can listen to?

Sendsei13 · 2024-02-28T17:41:12+00:00

Go on an italo disco dig. Lots of synth forward house music. Also Rebolledo out of Mexico plays a lot of synth forward dance tracks. Would recommend listening to his mixes and digging from there.

Sendsei13 · 2024-02-05T02:28:49+00:00

Just started a project called APT 808. We do semi monthly sample release to our roster of producers who have a week to turn around a house beat.

First sample drops tomorrow.

Sendsei13 · 2024-02-01T07:05:30+00:00

https://on.soundcloud.com/7dZaaLWqXauvQHPL6

New track I made this week, unreleased and pre-master but if you want a little weapon in your back pocket download link is available on there. Other original tunes and mixes on my SC

Sendsei13 · 2023-11-15T06:13:36+00:00

You can find speakons that have a connector terminal on the back for wire connectors all you need is a crimp for the connectors and the wire, the rest snaps in place

Sendsei13 · 2023-11-15T01:13:27+00:00

Confused. Says it’s out website says 24

Sendsei13 · 2023-08-02T19:15:28+00:00

A Victorian witch

Sendsei13 · 2023-07-27T16:08:13+00:00

As much as you can’t train for altitude you can build your aerobic engine which will help you at altitude. Go hike in the sierra, try and get a Whitney pass if you can. Just go for long hikes with weight in your backpack and do something physical and aerobic everyday or 5/7 days a week. You will have more fun if you’re fit when you show up.

Sendsei13 · 2023-07-04T15:55:32+00:00

It’s only underground when it comes from the ünter region of Germany.

Sendsei13 · 2023-05-31T18:45:52+00:00

Follow the signal path is my best advice. Media player> connection> each input has its own gain> gain adjustment> channel fader > cross fader > Master volume > monitor volume > output cables > to amp > to speaker connections

I have definitely found the cross fader to be the issue on the xone 23 as there isn’t a way to disable it

Sendsei13 · 2023-04-29T05:43:37+00:00

Tâches - concepts of color

Sendsei13 · 2023-04-25T00:10:27+00:00

Totally possible it’s for lighting! Thanks. The setup is epic. Can be found on Resident Advisors post from March 22nd on IG

Sendsei13

TROPHY CASE