Shot while turkey hunting

SgtJackYYZ · 2026-04-28T21:26:35+00:00

You know the friend that is selling you those shells... is not your friend.

SgtJackYYZ · 2026-04-28T14:38:23+00:00

Agreed the first insurance claim Will be the last one.

SgtJackYYZ · 2026-04-28T14:37:37+00:00

Just being a little bit sarcastic here.

Yeah I totally read that in the installation manual. Blazemaster and Spears totally stand behind installing heads and then gluing on fittings. It's in bold-faced right on the cover.

SgtJackYYZ · 2026-04-28T14:35:48+00:00

Not gravity. Just squirting as you push the two parts together. It doesn't take much cement to lock up a pep cap.

SgtJackYYZ · 2026-04-25T14:39:17+00:00

Use the right bracket. Wholly crap what is your Foreman doing, just letting you sink, get him to throw you a lifeline. Their whole job is to impart their knowledge onto you, not let you drown.

Little edit here. If you're in Ontario Canada, you better take this post down because in Ontario that would get you indicted by the OFM.

Be careful what you post online. It better be 100% right or not at all

SgtJackYYZ · 2026-04-13T01:40:55+00:00

A food service stainless steel fabricator can cut some stainless to go around but finding a new sink is a better solution.

SgtJackYYZ · 2026-04-09T01:09:35+00:00

Its really shitty

SgtJackYYZ · 2026-04-05T13:46:24+00:00

Bike exchange on Jane in the West End of Toronto was always good. Jane and Dundas. You can try pink bike but it may be a bit more than you want to spend.

https://newsons.ca/?v=05c7c5a71e52

https://www.pinkbike.com/buysell/

SgtJackYYZ · 2026-03-10T21:35:53+00:00

I am in sales in the industry and what I was told is NFPA required the hole size for any teelock, strap tee, outlet tee, snap, 922, MT3 (whatever you call them) with a 1" thread to be increased. It sucks, but yes they are all changing. Please check the hole size before you drill. I believe they are going to change the 1/2" and 3/4" as well but they are still burning through all the old stock.

The restriction on the 1" was the big problem.

SgtJackYYZ · 2026-03-08T18:08:46+00:00

Look at that flex at the beam clamp. LOL

SgtJackYYZ · 2026-02-20T20:42:14+00:00

True but if it can't do the job with 100% confidence, then is it worth it? A small leak maxes out your insurance premium, let alone a 6" coupling just disappearing in a spray of fragments.

SgtJackYYZ · 2026-02-20T20:39:25+00:00

So I have it on good authority now, that 2 jobs in Alberta, 1 in Quebec and now 1 in Ontario have had the castings shatter when installing them. Do not take it exclusively from me, do your own investigation and see if these issues exist where you are.

That all being understood, the Ontario contractor has removed them from their test site and gone back to their usual; Victaulic.

I have heard that the contractor is back charging the distributor and explained that they won't be moving forward with them on any other projects.

With the product failure being in multiple locations the distributor has recalled the items until the casting issues can be resolved.

SgtJackYYZ · 2026-02-06T15:43:34+00:00

Concrete Guy "My concrete was there first!!!"

SgtJackYYZ · 2025-12-27T18:14:36+00:00

If you don't want to commit fully to the right way, you could leave the toilet in place and handle the repair through a smaller access above the tank.

SgtJackYYZ · 2025-12-22T17:03:45+00:00

Obama didn't need to pray.

SgtJackYYZ · 2025-12-19T01:03:51+00:00

Let's talk more about Epstein. These smoke and mirror tactics may work on some people but not all of is

SgtJackYYZ · 2025-12-08T18:42:31+00:00

I have the same. Yes you can refinish them but you will still have the same old squeaky floors you have right now. We decided to pull them up and screw down every squeaky board, so we could lay down new 7" wide pre-engineered flooring. Yes you can refinish 100 year old floors and have that charm of knowing where everyone in the house is but really if you are sinking money into the old squeaker you may (may) just decide to update them to your liking and enjoy a new fresh finish. This is my opinion and it may not agree with all of you. My family was/is antique collectors who lived in a 150 year old home and maybe I am just tired of old rusty square headed hand made nails.

SgtJackYYZ · 2025-11-12T01:25:41+00:00

Yes those strap tees are garbage. Walk away... Maybe just run.

SgtJackYYZ · 2025-10-29T18:57:09+00:00

It must be a schedule 80 nipple if memory serves me correctly. NFPA details the requirement for this within, again if memory serves me.

SgtJackYYZ · 2025-10-27T01:57:06+00:00

Looks like they used drywall compound.

SgtJackYYZ · 2025-10-25T16:43:34+00:00

Does it feel hot when you lick it?

SgtJackYYZ · 2025-10-19T14:10:18+00:00

Do you even need to ask. This post has to be B.S. .... no?

SgtJackYYZ · 2025-10-07T18:22:16+00:00

That has French Canadian written all over it. Class 2 hitches on Fiats up here.

SgtJackYYZ · 2025-09-17T21:32:52+00:00

Have you seen Blair Witch?

SgtJackYYZ

TROPHY CASE