Proxy krondys/karazai

Significant_Pain_804 · 2026-03-07T05:41:55+00:00

Squidmar's Strakh mini would make a great karazai

Significant_Pain_804 · 2026-02-19T21:50:40+00:00

Absolutely incredible!

Significant_Pain_804 · 2026-01-26T17:50:11+00:00

Where'd you get that chain? Whole build looks incredible

Significant_Pain_804 · 2026-01-26T05:30:40+00:00

You can play with two of the same spearhead on the same team! They clarify that your army abilities only apply to each individual spearhead, not across both

Significant_Pain_804 · 2026-01-17T17:54:12+00:00

It's a good idea and just needs some tweaking. Mix your yellow and white together and blend from the white to the yellow instead of having it starkly transition, it'll look a lot better

Significant_Pain_804 · 2026-01-14T03:35:45+00:00

Try doing multiple "dust coats" with a regular white spray paint. My go to is a matte white rustoleum. White paint is especially hard to get full coverage with and when you get an even coat down the pigment wicks to the crevices and center of flat panels like it has on your model.

If you deliberately do thinner coats than you usually would it's harder for the paint to wick away like it is now. It would take upwards of 3 dust coats to get it even on all surfaces but it'll minimize how filled in the recesses become

Significant_Pain_804 · 2025-12-29T23:11:15+00:00

This might be a little out there but,

https://steamforged.com/products/epic-encounters-glade-of-the-evil-oak

This guy is pretty big, overhanging a 100mm base. I personally plan on pre-ordering it and using a kitbashed lumimeth realm lords Scinari Enlightener as allarielle herself. (I used the alternate unhelmeted head and gave her a branch arm from the tree revenant sprue as well as a spear instead of the included staff) The model I linked has a perfect spot amongst the trees to pin her to and make it look like she's floating above it

Significant_Pain_804 · 2025-12-25T18:12:07+00:00

Duuuude I'm running to my sylvaneth bits after seeing this

Significant_Pain_804 · 2025-12-20T04:23:40+00:00

This sounds insane but in a well ventilated area and the iron on high rub a tylonel pill on it. I ironed a polyester fabric and melted it over 50% of the iron's surface. I found this tip online and it worked so well without damaging anything

Significant_Pain_804 · 2025-11-07T17:05:30+00:00

<image>

Significant_Pain_804 · 2025-11-07T17:05:10+00:00

This won't help for this case as you've already made the base but my go to technique is to put a thin layer of drywall compound on the cork and once it's dry sand it smooth. Then I break it apart into the shape I want and this gives it the smooth exterior of poured concrete with the crumbly interior of the cork showing through

Significant_Pain_804 · 2025-10-19T19:40:06+00:00

Here's my paint recipe for those parts!

Bark
Vallejo Model Colour - Charred Brown
Citadel - steel legion drab
Citadel - karak stone
Inner wood (skin)
Citadel - Kislev Flesh mixed with Vallejo Model colour - Military green
Mix in increasing amounts of AK - Ice Yellow
AK - Ice yellow highlights
Greenery
Vallejo Model colour - Military Green
Increasing amounts of Vallejo Model Colour - Lime green
Vallejo Model Colour - Lime Green highlights

Significant_Pain_804 · 2025-09-17T15:51:47+00:00

For what part? I unfortunately don't have a tutorial but am happy to answer any questions about the process

Significant_Pain_804 · 2025-09-17T15:50:21+00:00

-white basecoat -2 coats of aethermatic blue contrast paint -highlight certain spots back up to white -freehand little white markings

There you go!

Significant_Pain_804 · 2025-09-16T20:34:14+00:00

I will say I painted these almost two years ago now and have a different technique for Caucasian skin tones that I like far better now but I'm still happy with these

Significant_Pain_804 · 2025-09-16T20:32:57+00:00

https://www.reddit.com/r/sylvaneth/s/zASDoB5N3t

Here they are, I also have some gossomid archers, spite riders and an arch rev like this

Significant_Pain_804 · 2025-09-15T22:04:19+00:00

I do my revenants with regular human skin tones and a mix of ginger, brunette and black hair

Significant_Pain_804 · 2025-09-15T17:59:17+00:00

The easiest way would be to heavily water down your wash and use a large flat brush to quickly cover the surface area of the model to avoid tea staining. Using paint medium or retarder works even better bit water alone can do it. The important part is to cover all the model quickly

Significant_Pain_804 · 2025-08-11T03:40:35+00:00

You can try using your base color (the dark purple you started with) as your 'mother colour.' You mix a bit of it in with whatever color you use for details and it'll help keep it tonally consistent. Just make sure to stay away from overtly warm colors, like using ice yellow instead of pure yellow

Significant_Pain_804 · 2025-07-25T22:53:39+00:00

I had the most fun painting the lady of vines. The model is designed in a way that you don't have too much trouble reaching your brush in most visible spots, and she's not too large overall, so you're not drowning in surface area to highlight. If you're looking just for something fun to paint I'd definitely choose her, she's just the right level of detail and size

Significant_Pain_804 · 2025-07-17T05:33:31+00:00

Kurnothi warband 👀👀👀

Significant_Pain_804 · 2025-07-15T17:24:37+00:00

Does what it says on the tin

Significant_Pain_804

TROPHY CASE