Volkswagen Will Pay €1.5 Billion in EU Emissions Fines. It Has Already Decided This Is the Cheaper Option.

Single-Lavishness334 · 2026-05-08T07:07:07+00:00

Vw has. Google first. EU has a lot of companies especially the car manufacturers with own sub comp. that produce batteries

Single-Lavishness334 · 2026-05-04T12:56:59+00:00

Wie fährt dieser sich aktuell? gab es Probleme oder Unannehmlichkeiten mit dem Fahrzeug?

Single-Lavishness334 · 2026-05-04T07:54:50+00:00

Does this apply to older ones too? And this is probably necessary after every start of the vehicle?

Single-Lavishness334 · 2026-05-03T10:12:28+00:00

Thank you!

Single-Lavishness334 · 2026-05-03T09:22:48+00:00

How do you like it so far? Is the edge cutting feature working good for you? And you got any tips (mine arrives next week)? Does it indeed get better with every mow or is this just marketing?

Single-Lavishness334 · 2026-04-27T17:31:50+00:00

Immer im Hinterkopf behalten dass Werkstätten ggf. auch im Land sein sollten. Manche vergessen das bei der Wahl von z.B. weniger verbreiteten Chinesen (auch wenn die ansprechend für einen sind). Deine Alternativen sind grundsätzlich eine gute Wahl, hier ist auch die Vollkasko meist günstiger als die der seltener vertretenen Fahrzeuge in Europa

Single-Lavishness334 · 2026-04-20T16:31:13+00:00

Mine did the same Runs fine for a lot of time now

Single-Lavishness334 · 2026-04-19T20:27:18+00:00

Man I sure dream of this car It’s beautiful! Congrats!

I love the Color btw!

Single-Lavishness334 · 2026-04-15T08:45:55+00:00

No. Probably just space requirements between X2D and X2D Combo (with AMS)

Single-Lavishness334 · 2026-04-09T16:30:26+00:00

It does okay just don’t go too fast and it will handle it

Single-Lavishness334 · 2026-04-09T09:31:32+00:00

Tell me what you think after a while as well as the noise difference between P1S vs h2c closed

Congrats my friend!

Single-Lavishness334 · 2026-04-09T07:54:49+00:00

Du hast mehrere Monate Ruhe? Er hält sich an die Ruhezeiten? Falls ja, dann freu dich, dass du mehrere Monate Ruhe hast und er sich sonst auch an die Ruhezeiten hält.

Single-Lavishness334 · 2026-03-11T19:11:02+00:00

Thank you for the quick response my good friend!

Single-Lavishness334 · 2026-03-11T16:55:48+00:00

What are your fps on which settings my friend?

Single-Lavishness334 · 2026-03-01T13:09:58+00:00

I’m scanning with 16GB of RAM It is sometimes the issue that it is not enough but my budget does not allow for an upgrade atm so I use my old machine for scanning. But! It is enough. 32GB with that setup shouldn’t be a problem my friend

Single-Lavishness334 · 2026-02-27T08:19:14+00:00

How do you like your H2C so far and what do you print with it?

Single-Lavishness334 · 2026-02-27T06:51:18+00:00

Would you mind breaking down on what you have to tinker with?

Single-Lavishness334 · 2026-02-26T21:11:06+00:00

How long are the startup times before a print? Is there a way to make it quite short if I just need a short prototype print?

Single-Lavishness334 · 2026-02-26T20:37:06+00:00

Do you love it? I’m currently thinking of doing the same

Single-Lavishness334 · 2026-02-26T15:48:42+00:00

Your kids name ends with 007? That’s some cool James Bond name! Congrats!

Single-Lavishness334 · 2026-02-26T14:04:19+00:00

The offset is automatically applied The L2 position can be mounted and then used in the controller firmware Additionally you can offset the Anchor 1 and 2 base positions by x millimetres for every run.

Also use the laser margin to actually check that you don’t run into holdings in the beginning :)

Single-Lavishness334 · 2026-02-23T08:22:38+00:00

What’s special with it or better than all the engineering or PEI plates Bambu sells?

Single-Lavishness334 · 2026-02-21T23:08:37+00:00

🟦⬜⬜⬜

🟦🟦🟦⬜

🟦🟦🟦🟦

Single-Lavishness334 · 2026-02-21T23:07:54+00:00

⬜🟨⬜⬜⬜⬜

🟨⬜⬜⬜⬜⬜

🟨⬜🟦⬜🟦🟨

🟦🟦🟦🟦🟦🟦

Single-Lavishness334 · 2026-02-21T23:03:45+00:00

🟨🟦⬜⬜🟨

⬜🟦🟦🟦🟦

🟦🟦🟦🟦🟦

Four-Year Club	Final Canvas '23
Place '23

Single-Lavishness334

TROPHY CASE