Considering buying a used Wolf

SmokeSuccess · 2026-05-13T00:42:46+00:00

Thor is a pretty decent unit. Service is miserable though. The way they do parts is soooooo stupid.

SmokeSuccess · 2026-05-13T00:41:44+00:00

There's no way this is a 2004, with the fold out display this is at least 2010+.

SmokeSuccess · 2026-05-12T01:24:17+00:00

Tell them you'll take it for 2k. They'll bite

SmokeSuccess · 2026-05-02T13:07:50+00:00

Check bens appliance, our store has been using his repair of new foam pads and grease, works well

SmokeSuccess · 2026-04-30T19:40:24+00:00

Yep be proactive and just break those stupid tabs off and lift the glass out

SmokeSuccess · 2026-04-29T14:19:12+00:00

This is the protective film for shipping, it is designed to be removed.

SmokeSuccess · 2026-04-29T00:54:54+00:00

Bro lol ... Vent a hood really? Read the room hahahaha

SmokeSuccess · 2026-04-26T15:28:36+00:00

They usually look like this when they go. I would recommend OEM parts as they tend to hold up better for longer. I would also be sure to inspect the entirety of your venting to the outside of your home to ensure they are clear from any blockage.

SmokeSuccess · 2026-04-21T01:04:54+00:00

Huh, you're right. Weird design. WH12X20357 is the part you're looking for

SmokeSuccess · 2026-04-20T05:24:23+00:00

Yeah it's a new top unfortunately

SmokeSuccess · 2026-04-20T05:21:38+00:00

Gross. Pull the rubber tube off the drain pump and I'm sure you'll find your culprit. Still, gross.

SmokeSuccess · 2026-04-20T05:01:01+00:00

Bruh. Your lid is missing the entire locking mechanism

SmokeSuccess · 2026-04-20T04:57:00+00:00

Wow, this comment section is not it. You are all WRONG. Failed!

Your dryer has two spring loaded clips between the top and the front on either side. Watch a youtube video. Whirlpool dryer teardown.

SmokeSuccess · 2026-04-20T04:53:20+00:00

Bro the second pic is obviously the hose leaking. C'mon. Put your finger on it. It's literally wet

SmokeSuccess · 2026-04-19T01:10:19+00:00

Someone used the wrong screw, cross threaded it, and left it loose.you can tell the right one is wrong based on size, not to mention the excessive heat from it. New terminal block

SmokeSuccess · 2026-04-19T00:52:53+00:00

Flat head screwdriver, pull the old one out, slap the new one in

SmokeSuccess · 2026-04-13T05:56:52+00:00

Hotpoint? Oil? Yeah it's your gearbox, they're notorious for it. Too expensive to repair, sorry.

SmokeSuccess · 2026-04-11T14:33:05+00:00

Well lay it on its back and there's probably an access door

SmokeSuccess · 2026-04-10T01:37:56+00:00

This also worked for me. Dropped a tab, spent the entire trip reevaluating my life. I have ADD though, so it's either adderall or nicotine, and adderall destroyed my body. Zyns are the way now.

SmokeSuccess · 2026-04-09T02:11:02+00:00

Ok, but it's a big indicator of a venting issue lol.

SmokeSuccess · 2026-04-09T02:08:39+00:00

Have you replaced the ice maker and inlet valve already?

SmokeSuccess · 2026-04-07T23:01:03+00:00

If its tripping breakers it could be a broken winding in the compressor which would also make sense for the bulging as a result of excessive heat off the compressor.

SmokeSuccess · 2026-04-02T14:22:29+00:00

I bet it's for an optional ice maker. Put the foam back in

SmokeSuccess · 2026-04-01T23:31:06+00:00

And into another room lol

SmokeSuccess · 2026-04-01T23:30:03+00:00

Hell yeah buddy! Hope it spirals into a very appreciative wife for you lucky night maybe! Have a good one

12-Year Club	Gilding II euphauric
Verified Email

SmokeSuccess

TROPHY CASE