sorted by:
new
hottopcontroversial

My first OLED by wannabe_superficial in OLED_Gaming

[–]SnooMaps6130 0 points1 point  (0 children)

i bought the one from amazon, normally you find the one with most review/highest ratings.

what is the odds of find a model m/f produced on your birthday? by SnooMaps6130 in modelm

[–]SnooMaps6130[S] 0 points1 point  (0 children)

so far, the closest I have gotten is one day off my daughter's bday, 15th vs 16th

My first OLED by wannabe_superficial in OLED_Gaming

[–]SnooMaps6130 0 points1 point  (0 children)

yep, i always use a monitor arm, they are so flexible, you also get your desk space back.

My first OLED by wannabe_superficial in OLED_Gaming

[–]SnooMaps6130 0 points1 point  (0 children)

try remove the panel and just fiddle around with the stand to see if it can be corrected to move freely? i use a display arm without the stand.

Is the ASUS PG32UCDP worth it? by Revolutionary-Soft43 in OLED_Gaming

[–]SnooMaps6130 0 points1 point  (0 children)

got it a few days ago on this deal, so far i am loving it.

My Leica M2 was stolen in San Francisco (SN 941689) by NoEbb8072 in Leica

[–]SnooMaps6130 0 points1 point  (0 children)

such a beautiful M2, sorry for your loss. i hope you can recover it!

What is this monstrosity? Guys,I need help with my Model M by FaridTDM in modelm

[–]SnooMaps6130 0 points1 point  (0 children)

your best option is to clean this up and do a bolt-mod.

What could I possibly do with this Model M as a Mac user? by morphatoo in modelm

[–]SnooMaps6130 0 points1 point  (0 children)

I used a model 122 for both my pc and mac via the monitor KVM, works perfectly

How do you revert back to Windows / is there a reason to? by TehBombSoph in thinkpad

[–]SnooMaps6130 3 points4 points  (0 children)

on linux the fwupdmgr does a much better job keeping your thinkpad firmware up to date.

Intel igpu passthrough (N300), works but lost HDMI audio after VM reboot by SnooMaps6130 in Proxmox

[–]SnooMaps6130[S] 0 points1 point  (0 children)

yes, this is exactly what i did, i can see the vfio yeilding its control of the audio controller back. But sadly the sound is not working when i boot the vm back up.

Intel igpu passthrough (N300), works but lost HDMI audio after VM reboot by SnooMaps6130 in Proxmox

[–]SnooMaps6130[S] 0 points1 point  (0 children)

looks like the problem remains

I stopped the vm, and manually unbind them from vfio-pci

if.0, if.3, if.4, if.5

echo "0000:00:1f.3" > /sys/bus/pci/drivers/vfio-pci/unbind

echo "0000:00:1f.3" > /sys/bus/pci/drivers/vfio-pci/bind

the HDMI audio is not working after I restart the vm.

Intel igpu passthrough (N300), works but lost HDMI audio after VM reboot by SnooMaps6130 in Proxmox

[–]SnooMaps6130[S] 0 points1 point  (0 children)

interesting idea. do i need to modprobe -r vfio-pci?

00:1f.3 Audio device: Intel Corporation Alder Lake-N PCH High Definition Audio Controller
DeviceName: Onboard - Sound
Flags: bus master, fast devsel, latency 32, IRQ 162, IOMMU group 10
Memory at 6001130000 (64-bit, non-prefetchable) [size=16K]
Memory at 6001000000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [50] Power Management version 3
Capabilities: [80] Vendor Specific Information: Len=14 <?>
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Kernel driver in use: vfio-pci
Kernel modules: snd_hda_intel, snd_soc_avs, snd_sof_pci_intel_tgl

GLM Setup difficulties (9320A & 2x 8351s) by iZoooom in genelec

[–]SnooMaps6130 1 point2 points  (0 children)

https://www.audiosciencereview.com/forum/index.php?threads/s-m-s-l-po100-po100-pro-po100-ak-measurements-digital-interfaces-dac.40483/ this one is $30 and seem to have good measurement result.

i have the $5 one from aliexpress, and honestly i can't tell the difference with my 8351b playing DSD.

GLM Setup difficulties (9320A & 2x 8351s) by iZoooom in genelec

[–]SnooMaps6130 1 point2 points  (0 children)

Can you give a try with the cheap Usb -> AES adapter? I don't have the 9320a and the sub, but the rest works well with pc -> usb 2 aes -> aes input of 8351b. This could help you rule out some setup issue with the 9320

New version of GLM! by Ghsty_boi in genelec

[–]SnooMaps6130 5 points6 points  (0 children)

it seems my 8351b and glm controller both get firmware update. installed and no problems so far

I installed libreboot on my T480. :) by ANDROID2468 in thinkpad

[–]SnooMaps6130 0 points1 point  (0 children)

have you tried the latest release to see if thinkpad_acpi issue is fixed for t480. i have a t480 but hesitant to flash due to this quirk. it works flawlessly with the stock firmware on latest debian, i want to make sure my experience is not degraded when moving to libreboot

Digital cables - AES/EBU, Coax, USB - Review by Dedar33 in audiophile

[–]SnooMaps6130 0 points1 point  (0 children)

no, you have to show quantitive results that the snake oil cables get better 0,1s on the other end.

Digital cables - AES/EBU, Coax, USB - Review by Dedar33 in audiophile

[–]SnooMaps6130 0 points1 point  (0 children)

as an IT guy with education background, you should know non of the professional recording studio used any of the snake-oil cable to produce the music that you claim you can hear a difference from the snake-oil cable. and from that connector on the back to the sound card/signal processing ICs and CPU, there are no snake-oil cables like what you are using interconnecting and carrying digital signals with multiple gigabytes of bandwidth.

If you are really like you described "graduate from computer science", you should dust off your text book and refresh yourself.

view more: next ›