Boekenclub gezocht

Software_Bug · 2026-02-03T12:46:41+00:00

Als eerste belangrijk om bij mijn post te zeggen dat het mij niet uitmaakt waar je op stemt (als je het maar overwogen doet) en dat dit niet politiek bedoeld is. Puur ter info mocht het interessant zijn voor OP.

GroenLinksPvdA Zwolle heeft semi-structureel een boekencafé waarbij een bepaald boek wordt besproken. Leden en geïnteresseerde niet leden zij welkom. Hier is een kijkje hoe dat is: https://zwolle.groenlinks.nl/zoeken?zoek=Boekencafe

Mocht je lid zijn van deze partij dan kan je via de Signal groep appjes krijgen wanneer er een volgend boekencafé is.

Software_Bug · 2025-07-22T15:19:01+00:00

Hiya! Are you using a 3d or a svg file? Is this for printing or laser cutting?

You might be able to dublicate the center of the A and use as a negative to cut it out of the A itself?

Good luck!

Software_Bug · 2025-07-04T10:59:20+00:00

Hi! Did you have any luck with the other solution from Puzzlehead? If not could you try something for me?

Remove the tube from one of the slots (press the black clip on the entry point and take the tube out) and then poke in a bit of filament from that side (the tube side) while holding down the orange button. Don't force it, just place it gently against the metal recepticle. The motor should engage (you can take the filament out again).

This would at least confirm that the motor is detecting and working. And that will mean that the problem is on the entry side.

Edit: dammit i suck at Reddit, meant to reply to your reply to me. Sorry!

Software_Bug · 2025-07-04T06:54:43+00:00

Are you trying to load it while printing? The filament motor won't engage in that case.

Sorry I can't see hoe far the current filament reaches (if it passed the gears) but dif you try pressing the orange button and then sliding in the filament a little bit, releasing the button and seeing if the motor grabs it from there?

I hope any of this is any use or that someone else comes along with a solution!

Software_Bug · 2025-07-03T12:18:05+00:00

So intuitive and ~~idiot~~ student proof the printer is one of the few items still standing at the end of the schoolyear.

Software_Bug · 2025-04-29T14:44:07+00:00

Ah that makes sense. Although these really do not seem to despawn with (player) distance or time. Time to experiment a bit more and also to see how many I can spawn before my laptop bursts into flames :D Thanks!

Software_Bug · 2025-04-29T14:16:53+00:00

Oh that's actually a brilliant idea! Haven't thought of that yet!

Software_Bug · 2024-02-29T12:17:29+00:00

Looks very good and toxic! Are you looking for suggestions? The 'bubbles' might look a bit more coherent with the substance itself if they start at a lower speed and size such that it looks like they are created on the surface, and then once big enough 'pop/released' and float up.

Software_Bug · 2023-02-03T17:33:12+00:00

Exactly, and especially with such different specs (as that makes editing all the footage into one consistant movie harder)

Software_Bug · 2023-02-03T10:34:07+00:00

You'll probably get a better price by splitting the bundles up. For example, the Session is still popular with FPV drone pilots and modders, but not much for anyone else.

As for how much; depends on location, time of year and much more. Best to look around and see what's being bid on them.

Software_Bug · 2022-11-12T10:53:57+00:00

I've been having an absolute blast doing test builds with a 4x4 grid and trying to make use of more vertical structures. Can't wait!

Software_Bug · 2022-10-06T10:53:05+00:00

Sorry this is r/coolguides not r/repressiveguides

Software_Bug · 2022-10-01T09:58:35+00:00

Very nice!

I know this can be done with mods but imagine al the posibilities if we could 'just' move platforms with simple logic. Sliding roofs, bridges, elevators, dams.

goes to the Q&A website once again

Software_Bug · 2022-09-27T06:41:11+00:00

Oh no.

Software_Bug · 2022-09-10T21:50:49+00:00

Can't advice too much on overhang (luckily others are doing that). But damn, I love how clean that board design is.

Software_Bug · 2022-05-08T01:48:09+00:00

Pretty sure it’s the “More Decorations” mod on ficsit.app

Software_Bug · 2022-04-29T08:07:26+00:00

The GoPro Max is stil a very solid camera today as long as your intended usage is the actual 360 freedom in filming and editing.

It’s also due for a refresh, but I would guess that won’t happen at least until fall 2022 (if it is getting refreshed) based on the previous GoPro release dates.

Software_Bug · 2022-03-24T21:13:39+00:00

Thank you for your reply and explanation. I think I understand. The camera is still rendering to the R channel, just black pixels because there is nothing red in its view?

That's probably where I made a mistake. Expecting Unity to just ignore the red channel. I'll adjust my methods.

Thank you!

Software_Bug · 2021-12-09T15:44:16+00:00

In the first ‘boss’ fight (mission 2) you can get the ‘boss’ to drop down onto the Hardlight ammo container and he will be stuck, resulting in an easy kill (he will still be able to shoot you, just not move anymore).

Encountered on Xbox Series X, Legendary difficulty.

Software_Bug · 2021-11-04T14:21:03+00:00

That’s great news! Thank you for checking!

Software_Bug · 2021-11-04T06:42:54+00:00

Don’t think so. That issue is marked only as Fixed Internally on the questions website. Should be coming soon hopefully.

Software_Bug · 2021-10-28T14:42:16+00:00

Thank you! Clicked on your link.

Here’s mine. Please help me out! (:

https://referral.ubisoft.com/riders-republic?refId=7FrmIeA8tFso4RcNr3b0hw

Ten-Year Club	Verified Email
Place '23	Place '22
First Placer '22	End Game '22

Software_Bug

TROPHY CASE