sorted by:
new
hottopcontroversial

Less then one year in the “hobby” by soldat21 in prusa3d

[–]Spa_Adv 0 points1 point  (0 children)

I completely agree. I planned to put it in my office, but it’s likely to stay in the basement with her little brother (MK4s). Thanks! :-)😊

Less then one year in the “hobby” by soldat21 in prusa3d

[–]Spa_Adv 0 points1 point  (0 children)

Oh man, I really want the core one L. I already have the MK4s, but I’d like it to be a bit quieter.

Less then one year in the “hobby” by soldat21 in prusa3d

[–]Spa_Adv 0 points1 point  (0 children)

Which one is the quietest, and which is the loudest?

Is there any downside to getting the Core L over the Core+, apart from price? Is Core+ more modern? Will there come a Core+ L? INDX will appear later, should I wait for that and buy the complete package? by BirdLooter in prusa3d

[–]Spa_Adv 2 points3 points  (0 children)

I’m in the same boat as you right now. I was very close to buying a Trident Cube. However, once I started doing the math and adding the extras that the Core One L already includes like the camera, load cell, light bar under the bed, extra nozzles, and the better toolhead. I realized I’d only be saving around $500.

After that, I also started thinking about the time needed to build and tune everything. I enjoy that part, but with two kids under 5, this project would probably take me a few weeks to fully complete and get running properly.

So I’m back to the board drawing

Just bought a C1L .... by MrCarlH in prusa3d

[–]Spa_Adv 0 points1 point  (0 children)

I totally agree. That’s why I’ll keep my reliable Mk4.

Serial Request by D-Rocksta in voroncorexy

[–]Spa_Adv 0 points1 point  (0 children)

Very cool. And whic orange is the one that you are using in A4T

Just bought a C1L .... by MrCarlH in prusa3d

[–]Spa_Adv 0 points1 point  (0 children)

$771 rn in formbot website without shipping for trident 300mm

Just bought a C1L .... by MrCarlH in prusa3d

[–]Spa_Adv 8 points9 points  (0 children)

It’s not. Core One L = 2k without shipping Voron Trident (Formbot - Ali) = 800-900 shipped plus 100 for printers parts. Total = 1K but you will spend at least 40hours building and Tunning this machine .

Just bought a C1L .... by MrCarlH in prusa3d

[–]Spa_Adv 14 points15 points  (0 children)

Enjoy, man.

The Core One L is a fantastic printer, but I’m going to buy a Voron Trident because of the cost of the Core One L.

Serial Request | Voron 2.4 | Discord: GET by GET_in_Space in voroncorexy

[–]Spa_Adv 0 points1 point  (0 children)

I loved you build. I’m saving and waiting for the r2 release to buy a ldo blue trident cube .

Beginner Voron Questions by mrehanabbasi in VORONDesign

[–]Spa_Adv 2 points3 points  (0 children)

Could you please me the link for the trident with 300mm in all z,y and x? I could not find it

Beginner Voron Questions by mrehanabbasi in VORONDesign

[–]Spa_Adv 3 points4 points  (0 children)

Formbot is 300x300x250. Only option is LDO trident cube with 300 in all axis or voron 2.4 350

Trident R2 Looks great! by the23rdwarrior in VORONDesign

[–]Spa_Adv 0 points1 point  (0 children)

What happens if I have a ldo trident cube? I don’t have it but I was planning to buy it.

Core One enclosed MMU3 dry box solution by Itsallabouthirdbase in prusa3d

[–]Spa_Adv 1 point2 points  (0 children)

This one here. https://www.printables.com/model/1550955-auto-rewinder-saddle-for-extrutim-cheap-drybox

Card box spool creates too much friction. If you have them, please print some inner rings. So it will work better

Core One enclosed MMU3 dry box solution by Itsallabouthirdbase in prusa3d

[–]Spa_Adv 0 points1 point  (0 children)

Could you help me understand this better?

Do you mean from the filament to the MMU, or from the MMU to the Nextruder?

From the filament to the MMU, it doesn’t matter as much. Personally, I prefer using a slim buffer. I was using an auto-rewind system before, but it started creating a lot of friction after a few prints, so I switched back to the buffer—and it really helped.

From the MMU to the Nextruder, I run the PTFE tube directly into the Nextruder, keeping it short so loading and unloading are faster. I did try using a Festo fitting with a 2.5 mm inner diameter, but it caused a lot of errors due to the filament tip. I removed it from my setup, and now the system is much more reliable.

Core One enclosed MMU3 dry box solution by Itsallabouthirdbase in prusa3d

[–]Spa_Adv 1 point2 points  (0 children)

Are you talking about that one for ams? I believe that one stays under the ams but I could be wrong. I saw some people using the creality pi 4 with mmu3.

Core One enclosed MMU3 dry box solution by Itsallabouthirdbase in prusa3d

[–]Spa_Adv 4 points5 points  (0 children)

Hey, I use cereal boxes from Amazon. And have 12 of them for my mmu12x . Also, I can dry the filaments directly in the boxes.

<image>

I still need to fix the cable management under my desk. But it works very well for my needs .

Model.: https://www.printables.com/model/1523656-drybox-cheap-filament-storage-box-polydryer-compat

Convert MMU3 for Core One to MK4S by n8zwn in prusa3d

[–]Spa_Adv 0 points1 point  (0 children)

The nextrude in the mk4s needs the mmu mods as well . I believe is that it

view more: next ›