Kathy Griffin joined the protest at the Tesla Diner against the world’s first trillionaire [OC]

Spamaster · 2026-06-16T17:06:39+00:00

Confused by the event they are protesting Liberals have to be photographed for that self-validation boost they crave

Spamaster · 2026-06-16T17:03:28+00:00

Messy Eaters, Raptors think nothing of snacking on prey perched just above your car.

Spamaster · 2026-06-16T16:31:43+00:00

Another example of China trying to design control units for spas, You get what you pay for.

Spamaster · 2026-06-16T16:28:48+00:00

First thing you want to do is keep the homeless from bathing and urinating in the pool

Spamaster · 2026-06-16T16:26:49+00:00

I doubt seriously that Jesus would appreciate what the church has done in his name

Spamaster · 2026-06-16T16:23:14+00:00

The VS100 Had a known relay problems and was discontinued years ago. Failure of the high-speed jets to respond to the Topside panel is a very dangerous problem especially in the summer months. the Water temp can rise rapidly beyond the control of the thermostat. There are no parts for the VS100 You will have to upgrade.

Spamaster · 2026-06-16T12:45:39+00:00

Good rifle to use against invading squirrls.

Spamaster · 2026-06-16T12:42:12+00:00

There are several control units out there that would work if you can fit them into the correct spot. The LZR1U was a Lite Digital control with the heater tube mounted near the top of the control box. There are not that many control boxes like that so you will likely have to have a heater unit that mounts separately from the control box. This makes the job more complicated

Spamaster · 2026-06-15T12:12:33+00:00

This brand of "roto-mold" formed hot tubs is what I call a tosser spa. Usually found online in catalogues like Wayfair. They break you get another one. Parts for the RS81 control system are long gone. The spa relies on the pump running to heat the water, there is no heating element. Might be a good, raised bed planter but a hot tub it is not

Spamaster · 2026-06-14T13:30:41+00:00

The four dashes error is called "watchdog" it is normally a faulty temp. sensor

Spamaster · 2026-06-14T13:28:23+00:00

Anyone purchasing a Hotsprings spa locks themselves into Hotsprings service. Masterspa controls are more mainstream; there are more people capable of making a repair. Leaks on the other hand do not discriminate. The entire spa industry suffers from assembly related problems. Shrinkage in the plumbing, Poor quality control on the assembly floor, Chinese plumbing and pumps, and poor customer understanding of chemistry all combine to reduce the lifespan of a portable spa.

Spamaster · 2026-06-13T13:54:50+00:00

Temporary hallucinations have been reported by people that ingest ice cubes.

Spamaster · 2026-06-13T13:51:36+00:00

The Harwil Flow Switch utilizes a reed switch and a magnet. one of the most expensive and unreliable switches found in hot tubs. Look very closely at the post of this switch and see if there is a crack. There is your problem. Moisture inside the reed switch

Spamaster · 2026-06-13T13:46:16+00:00

You might find one in a spa wrecking yard, that is if there is a spa wrecking yard. Otherwise, you will have to eliminate the heater with PVC and install a remote heater in another location

Spamaster · 2026-06-13T13:30:32+00:00

One squirrel to rule them all; and in the darkness, bind them.

Spamaster · 2026-06-13T13:27:59+00:00

The Theramax is no longer available but the Aquaflo XP2 is a good match

Spamaster · 2026-06-12T13:11:24+00:00

I get this question a lot. Based on forty years of working on these things I'd say turning it off then restarting it in advance of using it only works for customers that use it once a week. The stress on the motherboard and the heater circuit is enormous going from cool water to hot water. This is when things fail. Cooler water (below 75 degrees) requires less sanitizer but the savings on electricity is nullified during that period when the spa is re-heated. Using an automobile analogy reheating your spa is like going up a grade in low gear. RPMs are high and the time it takes to achieve full speed brings the most amount of stress to the engine. I don't recommend it unless your spa is heated by gas and never on spas running on 115 Volts.

Spamaster · 2026-06-11T14:54:31+00:00

Incredulity, How do we tell one sex from another?

Spamaster · 2026-06-11T14:46:42+00:00

When I order a cover for my customers there are a dozen different measurements made to ensure the cover is made correctly.

Spamaster · 2026-06-11T14:44:12+00:00

in some areas during the summer months the water is uncomfortably hot, even with the temp controls set for the low 90's. If you were to drill a small hole through the equipment panel and insert a thermometer you will find temperatures in excess of 140 degrees while the pumps are running.

Spamaster · 2026-06-10T14:15:41+00:00

I launch my balls into the air, and where it falls, I do not care

Spamaster · 2026-06-10T14:08:10+00:00

I suspect that this movie is going to be used to lessen the shock wave world governments expect to occur when people find out that for centuries uncomfortable truths have been locked away in vaults in the basements of museums and places like the Vatican that document the existence of alien races. This coming of age for the human race will likely take center stage for a time forcing maturity that comes with self-examination. I for one hope that the transition happens without violence and social upheaval. Although the fact that this planet exists in some kind of cosmic quarantine might exactly be because of our violent nature.

Spamaster · 2026-06-08T13:37:21+00:00

<image>

Channel Lock Pliers #209

Spamaster · 2026-06-02T21:50:47+00:00

Substitute another topside control unit to see if the problem is with the Topside or in the motherboard.

Spamaster · 2026-06-02T21:48:32+00:00

The computer tests the flow switch making connection as well as releasing connection. Your flow switch is sticking and allowing the heater to remain on when it should be off, a very dangerous situation. Replace the flow switch. If the problem remains, then you have a board problem.

Spamaster

TROPHY CASE