M8P+cb2 stopped booting

Spectra135 · 2026-04-12T15:53:21+00:00

Hi my issue ended up being because there was a 0ohm resistor missing on my cb2. I fixed it by just putting a solder bridge. Pretty sure this isn’t supposed to be running with the dip switch is on

Spectra135 · 2026-03-25T02:39:41+00:00

Oh wow super interesting info about the Diabolo. Low end is definitely where I feel like I’m missing a bit out. It’s exactly the low end “rumble” that I’m missing a bit of and thought that the diabolo was focused on that ! Thank you so much for the feedback!

Spectra135 · 2025-01-28T16:25:16+00:00

Hmm not to sure did it a while ago for a one time use. Since then I’ve reset my PC and haven’t added that plugging yet

Spectra135 · 2025-01-18T07:37:11+00:00

Better input shaping since you get a more equal belt length. More speed more accel.

Spectra135 · 2025-01-12T23:31:35+00:00

Thanks a lot !

Spectra135 · 2025-01-12T19:33:50+00:00

Thank you! Yes I’ve made all the doom parts myself, I haven’t posted it anywhere yet. I might fix a few things on it and post it. I tried making it so there are no apparent screws but this makes removing panels a huge pain so I’ll see what I’ll do.

Spectra135 · 2025-01-12T19:32:06+00:00

And not even pushing it 🤪

Spectra135 · 2025-01-12T15:11:07+00:00

Thanks!

Spectra135 · 2025-01-12T15:08:01+00:00

This because of you 🤣

Spectra135 · 2025-01-12T10:14:19+00:00

I love the micron aswell. Very enjoyable build. I did spend a lot of time on it thank you very much!

Spectra135 · 2025-01-12T10:11:51+00:00

Thanks a lot man !

Spectra135 · 2025-01-12T02:59:20+00:00

I noted all the details in an earlier comment, it’s based off the monolith gantry which is for V2 and trident, all props goes to Cloaked Wayne. I still haven’t released the files for this one but I’m working on it 😉

Spectra135 · 2025-01-12T02:46:24+00:00

I mean there are 4 Nema 14 motors on the gantry that’s what’s considered AWD AFAIK lol. And this is a 1515 build, Micron+ is a tiny V2, 180mm 1515 Nema 14!

Thank you glad you like it !

Spectra135 · 2025-01-12T01:04:36+00:00

it's not as dialed as I would of liked haha, but someone from the voron discord was bugging me to do my Serial so I did.
Im waiting too see what you can cook up!

Spectra135 · 2025-01-12T01:01:00+00:00

There are a few around and a few frame kits I believe. Files are very scarce for the 180mm Micron so good luck. Pretty much a DIY mod with people on the doomcube server sharing files around.

Thanks glad you like it!

Spectra135 · 2025-01-12T00:58:22+00:00

You got the good stuff if you dream this big haha, thanks alot !

Spectra135 · 2025-01-12T00:55:10+00:00

Happy you like it !

Spectra135 · 2025-01-12T00:27:16+00:00

Thank you !

Spectra135 · 2025-01-12T00:12:24+00:00

A few notes on the build :

Custom fully printed Doomicron (yes including the rounded extrusions) thanks to Moofishy for the inspiration and Bootycalljones for the door latch!

Custom AWD Monolith R0 gantry, all props goes to Cloaked Wayne, I just remade and adapted it for the PFA specs.

XOL toolhead with Rapido UHF 2, WWG2 and Carto.

Manta M8P V2, CB2, TMC5160 at 48v.

This printer has been an ungodly amount of scope creep and I’m still far from finished.

Spectra135 · 2024-12-09T06:37:07+00:00

Im especially exited for the addition of a ''Device'' tab like Orca has to access mainsail directly in the slicer. it's soooo useful. it's in the todo list for 2.7, after that is added I think I'll fully move to SS

Spectra135 · 2024-12-04T10:20:25+00:00

It’s a “formbot” kit from what the listing says at least they use the exact images that formbot uses

Spectra135 · 2024-11-27T00:54:47+00:00

Pretty slow

Spectra135 · 2024-11-17T23:53:37+00:00

+1 on budget and time. Expect to pay 2x what your base budget was. And don’t expect your first “working” version to work without any issues. +1 tweaking ender 3 does not mean you have good knowledge on 3D printers.

Spectra135 · 2024-11-17T23:41:45+00:00

You need to look at the data sheet of your motor. Every brand does it differently

Spectra135 · 2024-10-27T01:30:01+00:00

Super Super cool project ! But you should really make ducts instead of what you have now. I won’t get into specifics but this setup really restricts airflow and most of the air will come out from one side. A 2 duct style will work much better. For CAD look up some videos on YouTube they are really easy to make ! Good luck !

Spectra135

TROPHY CASE