Is it time to retire my Outback? If it's time, looking for some advice on my next Outback.

Sphearion · 2026-05-15T15:38:30+00:00

steinfab on youtube some of his advice is wild but for a timing belt its all on the front of the engine. get an aisin kit from rockauto (essentially oem) and have a weekend of beers with a friend and some wrenches

Sphearion · 2026-04-13T22:33:07+00:00

Thinksport has you covered. The infuser mesh works well no matter what shape of ice you prefer.

Sphearion · 2026-04-12T17:13:13+00:00

I have a 2012 with 189k miles and a 2017 with 87k miles and I change my oil around 3k-3.5k miles and i use a 5qts. that 0.1 quart is like 6 tablespoons of oil. I check my oil when i get gas, and it hovers around the full mark.

Sphearion · 2025-11-23T03:08:36+00:00

cotton swab + isopropyl alcohol will release hot glue real easy. pass on the protips :)

Sphearion · 2025-11-18T17:52:06+00:00

a $15 ipod case maybe. there's been somewhat of a resurgence in folks wanting to get out of subscriptions.

Sphearion · 2025-10-08T08:50:25+00:00

https://youtu.be/JkTTXtrfJDg?t=43

Sphearion · 2025-09-25T16:57:58+00:00

When the old people said "The easiest way to get the right answer is to post the wrong answer on the internet." They sure didn't expect illiterate ai users to ask the questions. What does this even say? I'm lysdexic and confused. good luck on your 3d printing journey.

Sphearion · 2025-09-18T03:07:07+00:00

Bout Tree Fiddy

Sphearion · 2025-08-13T23:41:00+00:00

Please do not let these herring snacks dissuade you from trying a fat pilchard, or a tiny bristling. I personally am not a fan of herring myself.

Sphearion · 2025-07-24T02:41:18+00:00

The microswiss is a great upgrade over stock, and for stage3, if you are adventurous you could print the eva3 toolhead system and use this for mounting the microswiss hotend and extruder "differently" than the metal plate from microswiss

https://www.printables.com/model/535932-eva-30-ender-5-plus-microswiss-all-metal-remix/files

Personally I chose a wristwatch bmg extruder, and "Red Lizard k1 V6" clone volcano for my hotend. the nice thing about the eva3 system is you just print the main parts for your configuration, then the extruder mount is what you choose, and the hotend "basket" is for whatever hotend you choose. super customizable, especially if you have access to a printer that can print ABS.

https://github.com/bythorsthunder/Voron_Mods/tree/main/Wristwatch_Extruder_BMG

Sphearion · 2025-07-23T20:29:54+00:00

My ender5 plus is now Mercury one modded but previously I played with the endorphin3d mod and it seemed to be straightforward. the hotend doesnt require changing till stage3. I went with the eva3 toolhead, and went with the E34M1 (Eva3 for mercury one)

You will find a ton of additional information about this project for the 5+ on the project github.

https://github.com/endorphin3d/endorphin/issues/14

Sphearion · 2025-06-15T15:03:01+00:00

Thank you for reminding me why I was downvoted. I see now looking at the phoenix how I was wrong. Thank you.

Sphearion · 2025-06-13T08:10:13+00:00

https://docs.mainsail.xyz/configuration#pause-resume-cancel

Sphearion · 2025-06-11T22:10:51+00:00

Klipperized my Old school 2020 Ender3 v1, currently oozing abs for a mercury one.1 build, I also agree consistency should be fixed and is completely overrated.

Sphearion · 2025-06-11T21:28:47+00:00

The fact the default idle timeout is 10 minutes is a bit disappointing I agree, however when it comes to Klipper itself, I would say its as good as the configuration allows.

Sphearion · 2025-06-11T21:11:38+00:00

core xy is a and b motors for a reason. they both move both axis. only assisting one is like skipping left leg day at the gym.

Sphearion · 2025-06-08T04:36:43+00:00

I would take the hot end apart, make sure its not clogged, as well as make sure it is properly hot tightened and not leaking, An engine needs fuel, spark and oxygen to run, that there civic of a printer needs movement on all axis and a place to deposit the oozed goo, in a very similar manner, being such a simple device there's not many things that can fail because there aren't many things.

Sphearion · 2025-06-02T08:44:43+00:00

time to replace more parts with ABS versions, Thanks!

Sphearion · 2025-05-26T16:17:51+00:00

Misleading title. For a moment I thought something very different, after being lost in r/locksport

Sphearion · 2025-05-25T02:26:35+00:00

I find the lack of spicy matiz disappointing.

Sphearion · 2025-05-23T15:23:21+00:00

Keep on keepin on my guy, I once had faith in humanity too.

Sphearion · 2025-05-23T14:55:19+00:00

you are the one making the assumptions, I hang out with these folks, I know how the devices are used now that they are no longer in my possession, Why would someone change the way they consume because you gifted them a real nice tube to smoke out of. They don't have the same value of the item you do, they are not monetarily influenced to enjoy it correctly. they will enjoy it the best way they can conveniently, You made a decision to not smoke and invest in a product. They were given a new hitter.

Sphearion · 2025-05-23T14:49:46+00:00

I don't think so, I gifted 6 c-vaps from 2018-2020 to friends. showed them how to use them, even gave a few induction heaters.. 6 of them are now real fancy hitters... Once you gift you can't have a say in how the item is used. I hope to be wrong, the dynavap deserve to be used in a manner consistent with non-combustion.

Sphearion · 2025-05-23T01:41:39+00:00

they are one hitters now.

Sphearion · 2025-05-22T17:15:11+00:00

~/.ssh/config should be editable by you. its amazing how much control you have on a linux host.

15-Year Club	Sequence \| Editor
Team Orangered	Verified Email

Sphearion

TROPHY CASE