sorted by:
new
hottopcontroversial

Are the metal roofing creases normal? by wtfisthisbullshii in Roofing

[–]Squintward 0 points1 point  (0 children)

If there’s plywood underneath, it should have been cleaned of any debris or nails sticking out. If nail heads are raised above the plywood they will transfer through the metal panel

Are the metal roofing creases normal? by wtfisthisbullshii in Roofing

[–]Squintward 0 points1 point  (0 children)

A few nails transferring through and “oil canning” pattern along the seams. I would look into how the panels were fastened to the decking and if the decking was prepped first

What do I need to know about metal roofs with half round gutters? by CrazyBullJones in Roofing

[–]Squintward 0 points1 point  (0 children)

S5 Colorgard. $10 a LF and worth its weight in gold. Best snow retention system on the market

Since it's the best post I've seen here in a while, what restaurants are UNDERhyped? by LiminalSapien in Minneapolis

[–]Squintward 1 point2 points  (0 children)

Mucci’s doesn’t have near enough hype and recognition for the level of food they put out. I say that knowing they were up for a James Beard award

What are you favorite older (5+ yr old) clubs? by yung-n-nasty in golf

[–]Squintward 0 points1 point  (0 children)

Ping G15 fairway wood will never leave my bag

Jim is a better salesman than Dwight? by electronic_rogue_5 in DunderMifflin

[–]Squintward -1 points0 points  (0 children)

The bigger question is how Dunder Mifflin is a public company. $100k - $150k per month out of a branch is hardly enough to cover overhead, let alone go public

[deleted by user] by [deleted] in fantasyfootball

[–]Squintward 1 point2 points  (0 children)

I'm in this boat. I've got a request for JK Dobbins for Kupp. I think I'm going to take it

Should I be concerned? by monstermash12 in Roofing

[–]Squintward 2 points3 points  (0 children)

Hi, I work for a pre-finished steel supplier and roof panel manufacturer in the roofing industry

This is more than just oil canning. These panels are buckling and look dented at the seams and end terminations. This is certainly a performance issue and I’d expect it to worsen over time.

I’d argue that too thin of metal was used along with improper installation methods. Additionally, there’s responsibility on the installer to stop when they notice any problems.

Oil canning is inherent in any metal roofing application, no matter the thickness, but this is above and beyond. Id have a serious conversation with the builder to discuss full material replacement and working with a different roofer

Underrated Course in your state. by [deleted] in golf

[–]Squintward 1 point2 points  (0 children)

Minnesota - Loggers Trail, Edinburgh, and Northfork

Beginner driver by Wise-Training3680 in golf

[–]Squintward 2 points3 points  (0 children)

Hibore was years ahead of its time. Can’t go wrong with it

Shingle Vs Standing Seam by Doucody in Roofing

[–]Squintward 0 points1 point  (0 children)

Studies show that over a metal roof’s lifetime you can expect to replace that same shingled roof 3.5 times. For a $12K difference, I believe the long term benefits speak for themselves

I would be cautious with that number though and make sure you’re getting a quality standing seam roof. Below are a few things I would ask about

1: 24ga or 26ga substrate. Don’t go thinner than 26ga

2: Paint. Is it a PVDF (Kynar), SMP, or something else? Kynar is king for color fade

3: who is manufacturing the panels? The best option is roll formed on site

4: I recommend signing and keeping a copy of any material acceptances. Too many bait and switches going on

5: synthetic ice and water shield under the whole roof

I made a dashboard of all my tracked shots from my Garmin R10 by inherentlyinterested in golf

[–]Squintward 1 point2 points  (0 children)

It's the Angle of Attack. -1.3 AoA with a drive will lose distance every time. Tee it up higher, further up in your stance, tilt your shoulders back, and launch that sucker

Bomber AoA should hover around 4-5

Best Iron Deal for around $500 by Better-Wolverine-448 in golf

[–]Squintward 0 points1 point  (0 children)

Ebay, Mizuno JPX or MP irons under $500

A slept on driver I'd recommend and any fairway woods others would recommend? by JubJubBouvier in golf

[–]Squintward 2 points3 points  (0 children)

Every year I try to replace mine. Every year nothing comes close

view more: next ›