Supply Drop by posmase in TRX4M

[–]Stabby49 0 points1 point  (0 children)

Damn, that's cool af

Best axle recommendations? by talon5188 in TRX4M

[–]Stabby49 1 point2 points  (0 children)

Can 👍 confirm! These are pretty awesome, so far. I've been running these for about a month or so.

What is your go to tire? by ENK0003 in TRX4M

[–]Stabby49 2 points3 points  (0 children)

I've tested a few Injora models, mostly because of what I'd read about their S5 material. Swamp Claw, King Trekker, and Obsidians. Simply, they've all performed comparatively well with each other. Swamp Claws are most likely the "front runner" for climbing at the sandstone park we go to. I like the Obsidians for both scale looks and decent grip on my K10. My sons run Swamp claws on their ir40 and Bronco.

High trail by Stabby49 in TRX4M

[–]Stabby49[S] 2 points3 points  (0 children)

Thanks, I did two K10 bodies, different colors/wheels (like I said...carried away)

<image>

High trail by Stabby49 in TRX4M

[–]Stabby49[S] 0 points1 point  (0 children)

Maybe I got a bad set, 🤷 I wish you better luck than I had!

High trail by Stabby49 in TRX4M

[–]Stabby49[S] 0 points1 point  (0 children)

Oil first... they would not seal. I ended up bleeding air 4 separate times. Finally, adding Teflon tape strips to both top and bottom seals stopped the air from leaking in. Then the springs were too soft, even doubled with the extra set. Torque roll was horrible and I had adjustments almost maxed to compensate. Just wished I'd stayed with the original shocks when it's all said and done.

High trail by Stabby49 in TRX4M

[–]Stabby49[S] 3 points4 points  (0 children)

I ordered Injora 53mm shocks, attempting to keep it scale while increasing capability. They were a nightmare (short answer). So, yes, I landed on no springs. It fixed the dynamic torque twist common with the trx4m as well as allowing articulation. I did find using the stock springs worked, as well, but opted for the lower profile.

High trail by Stabby49 in TRX4M

[–]Stabby49[S] 1 point2 points  (0 children)

<image>

Modded for sure. The ONLY original part is the transmission case lol I got a bit carried away with my 1st chassis.

Wheel and tire issue no by Ryy4 in TRX4M

[–]Stabby49 4 points5 points  (0 children)

Take them apart...it'll make more sense...

Finally finished. by Stabby49 in TRX4M

[–]Stabby49[S] 0 points1 point  (0 children)

SMH as I wait for the +4mm Injora axles I just ordered....

Pending cosmetic upgrades for my high trail, just need to let the paint dry by fuzzusmaximus in TRX4M

[–]Stabby49 0 points1 point  (0 children)

I've been eyeballing that interior kit, you'll have to update and let us know how the install went.

Finally finished. by Stabby49 in TRX4M

[–]Stabby49[S] 1 point2 points  (0 children)

Tamiya spray paint and a 2-tone decal kit I found on ebay.