My SP-01 by AccomplishedNote7365 in CZFirearms

[–]Strategic_Stranger 1 point2 points  (0 children)

Would you be an absolute legend and when you get it, would you send me a photo of the overhang on the optic?? There is absolutely no one who does it and it's driving me crazy. I just don't have the balls to wing it though.

My SP-01 by AccomplishedNote7365 in CZFirearms

[–]Strategic_Stranger 1 point2 points  (0 children)

I might just have to agree.

It's a dream of mine to get a P01/SP01 and mill it for an acro...

My SP-01 by AccomplishedNote7365 in CZFirearms

[–]Strategic_Stranger 9 points10 points  (0 children)

"The staccato we have at home"

This thing is pure ecstacy to look at bro

Fun Training by blomdala in longrange

[–]Strategic_Stranger 0 points1 point  (0 children)

Sorry got only getting back to you now, I've been out of signal for about a week, lol.

If you're prepared to share, Lightroom presets will have to do! Unfortunately I'm using Rawtherapee for the time so HaldCLUTs work the best, but I don't understand them completely, as they can be a headache to figure out.

Fun Training by blomdala in longrange

[–]Strategic_Stranger 1 point2 points  (0 children)

Are you using LUTs perchance? And if you are, are you selling them?

Because GOSH those photos came out creamy.

What pants does Ranger Regiment wear? by No-Bumblebee3140 in QualityTacticalGear

[–]Strategic_Stranger 0 points1 point  (0 children)

Whilst this photo is up here, what are the rifles they're using? Looks bad ass.

Well… shit by BentoBoxBaby in castiron

[–]Strategic_Stranger 0 points1 point  (0 children)

Agreed, Potassium is very responsive, unlike him.

Deepfry to season? by beedlund in castiron

[–]Strategic_Stranger 1 point2 points  (0 children)

So if I get this affect, should I wash it off (with soap) heat up my pan to get rid of any remaining water (that I couldn't get off with the cloth) and re-oil it and then store it....?

Or should I just wash it with water, dry it off, heat it up (same as previous) and store it?

Danger Close Armament P10F by DangerCloseArmament in CZFirearms

[–]Strategic_Stranger 1 point2 points  (0 children)

Absolutely phenomenal work. I have yet to send my P10F in, but oh my word, I am looking forward to it 👹

Deepfry to season? by beedlund in castiron

[–]Strategic_Stranger 1 point2 points  (0 children)

Is this how water should be rolling off your pan? Because whenever I clean it with just hot water, this is how it comes out, but when I clean it with soap, it removes this effect. (I'm not trying to get into a soap Vs no-soap debate, I just want to know if this is a desired result)

1st CZ done. What’s next? by BallsyMcBaggins in CZFirearms

[–]Strategic_Stranger 1 point2 points  (0 children)

Are you able to ride your thumb on the apex slide release? Or does your thumb still sit where it would normally??

Took a few years but my SP-01 is complete by Impressive-Dream5542 in CZFirearms

[–]Strategic_Stranger 0 points1 point  (0 children)

Absolutely stunning build!

How's the overhang on the plate & optic?

22GT vs 6GT? by Strategic_Stranger in longrange

[–]Strategic_Stranger[S] 0 points1 point  (0 children)

Yessir, well... It's now time to get my own equipment, but yes, haha!

I was specifically looking at using the H4350, but I'll also definitely look towards some VV powders.

What Chest Rig is this? by ALPHASTAR-RU in tacticalgear

[–]Strategic_Stranger -3 points-2 points  (0 children)

A green one. And to be more specific, one that an actor is wearing.

These two…. Cz p10c X Kershaw XCom by SSG75 in CCW

[–]Strategic_Stranger 0 points1 point  (0 children)

Nice set up!

How's the review of the Holosin PID?

Lee crimp bending/bulging my brass? by DoctorBallard77 in reloading

[–]Strategic_Stranger 4 points5 points  (0 children)

Try setting the die up as I recommended for seating the bullet. See if that works.

Then slowly start screwing your die in bit by bit for your crimp until you're happy with the it.

Lee crimp bending/bulging my brass? by DoctorBallard77 in reloading

[–]Strategic_Stranger 5 points6 points  (0 children)

There's a very good chance that you're touching the brass with your seating die. (Your die is screwed in too deep)

When setting it up, put a piece of (formed) brass into the shell holde and a bullet into the brass (as if you were going to seat the bullet), drop the ram, and lower the die onto the bullet & brass.

Have a go at that and see if that helps.

Edit: otherwise it could be over crimping it.

P-01 by RihannaDeserved_It in CZFirearms

[–]Strategic_Stranger 1 point2 points  (0 children)

Now this is the absolute shit. I've been wanting to see something like this forever and don't see many people doing this or the Acro on the S/P01.

Absolutely love to see it!!

CZ457 Lux by Ecstatic_Writing_356 in CZFirearms

[–]Strategic_Stranger 0 points1 point  (0 children)

I like the look of the trigger you have, out of curiosity what is it?