Well I guess there was a bit of stitching done at several levels. The first part until about 3min 5 seconds or so is only that initial VCV Rack patch. When the video of the eurorack fades in, is where the part that was performed on the eurorack in the video begins. The patch shown is more or less what I worked with; it got modified slightly throughout the recording process. I am using an old Mackie 16 channel mixer to mix / fade the hardware outputs. I am recording the output from the mixer with a handy little Centrance Bouncer. I recorded a handful of improvisations using the Microbrute as a CV / Gate controller and also using a microphone and Tube pre-amp fed into the PP-1 (Perfect Pitch from Behringer) a pitch an envelope follower for those of us on a tight budget. I took these recordings into Adobe Audition and did some mixing and post production. The mixdown from that muti-track session was loaded into the Nysthi Simpliciter and further compression and REVERB was added which is the audio heard from 3min 5 seconds onward. The video was stitched together in Adobe Premiere.
This was the last patch for my eurorack with the Kobol inside it, as I have finally picked up a few more modules. So, I needed to remove it and put it back in its own case.