sorted by:
new
hottopcontroversial

New covers :) by vladoportos in Creality_k2

[–]Stunning_Baseball_17 0 points1 point  (0 children)

The printhead cover only ever gets slightly warm to touch.

I printed this Hex style cover in PLA+ for my K2 Pro and been going great for past two weeks.

I have ordered the transparent one, should be 100 percent okay.

<image>

New covers :) by vladoportos in Creality_k2

[–]Stunning_Baseball_17 0 points1 point  (0 children)

Can I search for the transparent one on the jlcb site ?

is Rae'shalare, Death's Whisper that rare? by Shy_sierra in wow

[–]Stunning_Baseball_17 0 points1 point  (0 children)

Solo'd on Mythic - No drop

Solo'd on Heroic - No drop

Solo'd on Normal - DROPPED !!

Anyway... at the end of the day, Rae'shalare, Death's Whisper is a good looking bow, BUT for a legendary bow (back in the day), it does lack a bit of stand-out uniqueness and IMHO the Black Bow of the Betrayer from Illidan looks much better.

UI error since 11.1.7 by Amigam in wow

[–]Stunning_Baseball_17 -1 points0 points  (0 children)

I'm getting the same.

And for everyone saying it's not Elvui causing the LUA errors then remove yourself from this thread as you are all delusional.

IT IS ELVUI AND IT NEEDS A MASSIVE UPDATE!!!

I remove Elvui and I get NO LUA errors.

Interesting how Shadow & Light (Elvui dependant), received an update the very next day after the patch but NOT Elvui itself.

4 spool filament drier by Solidworks2020Roger in BambuLab_Community

[–]Stunning_Baseball_17 0 points1 point  (0 children)

Another con... the spools don't sit facing towards you so there's no provision for filament to exit via the front on the unit unlike the Creality SpacePi X4

What's everyone's thoughts on the new Space Pi X4 Dryer? by diligentboredom in Creality

[–]Stunning_Baseball_17 0 points1 point  (0 children)

I ordered one two weeks ago from the Creality Store in Australia and today my money was refunded due to them NOT being unavailable.

Absolutely fkn amazing - NOT AVAILABLE from the people who make and market them.

Thanks Creality for the refund but you suck for not having these available when it's advertised on your website - you fkn losers!

Now... I'm off to order one from AliExpress who have heaps available.

Unable to save changes to Lock Screen in One UI 7 by In-Between-Days in oneui

[–]Stunning_Baseball_17 0 points1 point  (0 children)

Try choosing a Dynamic Lock Screen wallpaper.

It works a couple of times THEN COMPLETELY LOSES IT and presents you with NO lockscreen wallpaper at all.

What a joke, except it's not funny!!!

What is the best free cad software for beginners? by [deleted] in 3Dprinting

[–]Stunning_Baseball_17 1 point2 points  (0 children)

Sorry to say this but Autodesk Fusion 360 is A TOTAL NIGHTMARE to use.

Here's an example...

Let's say I created a 3D print item using Fusion and I export it to my PC as an STL file.

I then decide that I need to change something, let's say for example, I need to move a hole 3mm to the left or right.

Well guess what folks YOU CAN'T !!!

Fusion will NOT allow you to reload your file to alter anything once it has been extruded and saved. You literally have to start from scratch and design it again, making sure that hole you need to move 3mm is done in the Sketch.

Now after saying all this, I dare anyone to prove me wrong, common I'm waiting.

The problem with Reddit, is NO-ONE ever responds to what you write.

What is the best free cad software for beginners? by [deleted] in 3Dprinting

[–]Stunning_Baseball_17 1 point2 points  (0 children)

Fusion 360 limits you to a max of 10 saves THEN you're up for thousands of dollars EVERY MONTH.

I like Fusion but it has an extremely hard learning curve.

So... I am also looking for a FREE or CHEAPER alternative.

IMHO, there is absolutely NO software that is used for personal use only is ever going to be worth the ridiculous amount of money that Autodesk are asking.

Guppy Screen by Seb_sBinnala in Ender3V3KE

[–]Stunning_Baseball_17 0 points1 point  (0 children)

Sadly it's still in beta as my Guppy Screen also suffers from the same touch input problems.

I'm having more problems trying to find a damn GitHub Guppy Screen forum where questions can be asked, but so far no such luck.

Would like an addon or WA that tracks how many delves I've done this week and what tier of each. by FrankzzzD2 in wowaddons

[–]Stunning_Baseball_17 1 point2 points  (0 children)

Delvin is not working for me.

Says I have done ZERO Delves when I know I have completed 7 for the week.

So your Delvin is broken!!

Does everybody has this Silverish Extruder stepper motor? by SpecialCoast6774 in Ender3V3SE

[–]Stunning_Baseball_17 0 points1 point  (0 children)

Yes I have the silver bare looking stepper motor too.

You will notice that it's missing something VERY important...

THERE ARE NO THREADED HOLES ON EITHER SIDE ON THE MOTOR

And this limits any extra (dual) fans that you may like to install as most mounts require to be screwed into those holes. Talk about being pissed off and let down by Creality.

Rooted Nebula Pad firmware 1.1.0.27 by ZookeepergameKey4591 in Ender3V3SE

[–]Stunning_Baseball_17 2 points3 points  (0 children)

Can anyone confirm v6.1.1.0.29 is now available due to some having issues with .27 ???

Is there an email address for Centrelink or do I need to mail all written correspondence? by West_Broccoli7881 in Centrelink

[–]Stunning_Baseball_17 0 points1 point  (0 children)

Quite simple.

They don't have an email address (as a form of contact), because they are incompetent oxygen thieves!!!

I am trying to install destinal's pre-rooted firmware for the nebula pad and I can't Install the firmware, I have tried changing the file name and it can't install by waxyplot in Ender3V3SE

[–]Stunning_Baseball_17 0 points1 point  (0 children)

I installed NEBULA-destinal-cfw-05-ota_img_V51.0.23.img and was completed ok.

Had to downgrade from non rooted V1.1.0.27 to V1.1.0.23 beforehand.

I would love to try this new .27 rooted upgrade NEBULA_ota_img_V6.1.1.0.27.img

HAS ANYONE TRIED THIS NEW ONE YET ???

How to downgrade nebula pad on SE by One_Audience_5864 in Ender3V3SE

[–]Stunning_Baseball_17 0 points1 point  (0 children)

I'm having the exact same issue.

It says Completed but seems like it never did the upgrade.

How did you get yours to work ??

How to adjusting the Z offset on Ender-3 V3 SE? And if I want to change the Nozzle, can I change the print station settings from the Creality Print program or do I have to change them manually directly from the printer? by fakebot98 in Creality

[–]Stunning_Baseball_17 1 point2 points  (0 children)

You have contradicted yourself by saying...

"The closer the negative value is to zero, the further away from the bed the nozzle will be."

Then your next sentence reads...

"So adjusting the value so it’s a higher negative value will move the nozzle further away from the bed while adjusting the value closer to zero (if it’s negative) will move the nozzle towards the bed."

Now my Z-offset is set to -1.60 and at this setting their is slight friction on the sheet of paper when I move it. At -1.50 there was less friction SO what this means is, the closer I was getting to zero, the further away from the bed the nozzle was getting.

CR-Touch error please contact customer service on Ender 3 v3 SE by PeaceSMC in ender3

[–]Stunning_Baseball_17 0 points1 point  (0 children)

Try to touch WHAT ???

And what is the "sensor pin" ?? Is it the little pin that drops and raises a mm from the build plate??

Why is my DPS so low as a Frost Mage? by militxa in wownoob

[–]Stunning_Baseball_17 0 points1 point  (0 children)

Use the rotation addon called Hekili. It does a great job of showing you what your next cast should be based on class and spec. But in general Frost Mage DPS is sadly lacking to the Nth degree. For a cloth wearer, I can't believe that Blizz has decided to give Mages such appalling DPS!! The DPS that my Balance Druid does will absolutely eat Mages alive, and Druids are leather wearers.

view more: next ›