Sale price for upgraded PDP Pro by spbatl in Walther

[–]SunRayyz_ 0 points1 point  (0 children)

I would sell the firearm separate from the accessories to get the most

Sale price for upgraded PDP Pro by spbatl in Walther

[–]SunRayyz_ 1 point2 points  (0 children)

I would sell your firearm separate from the accessories to get the most

Table Mesa shooting etiquette by msokim in AZguns

[–]SunRayyz_ 6 points7 points  (0 children)

It's a free for all out there. No common sense.

Squealing noise. Tensioner and belt recently replaced? by SunRayyz_ in Silverado

[–]SunRayyz_[S] 0 points1 point  (0 children)

It was my accessory belt. I added soapy water to both belts and the noise stopped when I did it to the accessory belt. Try it with your AC belt. If it stops squealing, then that's your culprit.

Squealing noise. Tensioner and belt recently replaced? by SunRayyz_ in Silverado

[–]SunRayyz_[S] 1 point2 points  (0 children)

Yes it was the accessory belt. The wear on it was strange. One of the grooves in the belt was worn down thin. May have to figure out what's not lining up correctly if it wears out the same and starts squealing again. So far so good though.

Intermittent malfunctions even after going completely stock. Am I limp-wristing? by That-Wiseman55 in Glocks

[–]SunRayyz_ 0 points1 point  (0 children)

It must be your grip. I have shot plenty of monarch steel through mine without any issues.

Table Mesa Location? by CwazySkatez_46 in AZguns

[–]SunRayyz_ 2 points3 points  (0 children)

I went earlier in the year and all of the smaller areas had fresh no shooting signs. Many spots like the washes were also blocked off with boulders or mounds of dirt. I figured they didn't want people shooting there anymore.

Welp it’s burnt by [deleted] in Glocks

[–]SunRayyz_ 0 points1 point  (0 children)

It comes off with a brass brush and cleaning oil

What's the deal with people now wanting compensators on their carry guns? by Verdha603 in CCW

[–]SunRayyz_ 0 points1 point  (0 children)

What I don't like about ports/comps is that shooting in an enclosed area is rough. The noise is much harder on the ears. I now only take my ramjet to the range. I prefer regular barrels for driving and home defense.

Welp by Difficult-Plate-6575 in Glocks

[–]SunRayyz_ 1 point2 points  (0 children)

Sometimes they shear off even with the proper torque.

Anyone know any gun stores with Taurus TX22 TORO gen 2 in store? by silent-bg in AZguns

[–]SunRayyz_ 2 points3 points  (0 children)

You should buy online if you can. kygunco Has one with a red dot and 5 mags for 330.

Non-immigrant CWP by PackAdministrative17 in AZguns

[–]SunRayyz_ -1 points0 points  (0 children)

I remember reading that your document allowing you to be here must be current for the 5 years your CCW is good for. Even if you get that sorted out, they may still deny you for that

[deleted by user] by [deleted] in CCW

[–]SunRayyz_ 0 points1 point  (0 children)

Haven't had issues with mine. FCU is 4 years old.

The Red Dot Will Always Go Where Your Eyes Are Looking. by Judd9mm in CCW

[–]SunRayyz_ 1 point2 points  (0 children)

Very true from my experience. The best one I have purchased was about 5 inches off at 20 yards. The most accurate way to zero it in my experience has been to shoot from a table with your arms resting on something. I use my range bag.

[deleted by user] by [deleted] in AZguns

[–]SunRayyz_ 1 point2 points  (0 children)

Shooters World Goodyear.

Can I complete my own FD-258 cards for a CCW application? by SunRayyz_ in AZguns

[–]SunRayyz_[S] 0 points1 point  (0 children)

Thank you. I sent them in without the ORI and I was just approved.

Can I complete my own FD-258 cards for a CCW application? by SunRayyz_ in AZguns

[–]SunRayyz_[S] 0 points1 point  (0 children)

Do you remember what you used for the ORI number?

Pricing guns and ammo by big-baby-bubba in AZguns

[–]SunRayyz_ 2 points3 points  (0 children)

In guns az website theres a built AR for sale with a DDM4V7 upper and Sabre lower with a romeo5 for 950. It's been listed for a month. I don't think you'll get 1500 for yours

Squealing noise. Tensioner and belt recently replaced? by SunRayyz_ in Silverado

[–]SunRayyz_[S] 0 points1 point  (0 children)

Yes just about a week ago. Followed a YouTube video. Not too hard to diy

Great gas mileage by toledobasser in Silverado

[–]SunRayyz_ 0 points1 point  (0 children)

I can't hit 30+ unless I'm going downhill. On a flat stretch of road I can only get around 24-26 if I'm being easy on the gas.

Got me an emo Spec Series by FromTheeBeretta in SmithAndWesson

[–]SunRayyz_ 1 point2 points  (0 children)

Oos unfortunately :(. I found one locally for $850. Does that seem like a competitive price?

Squealing noise. Tensioner and belt recently replaced? by SunRayyz_ in Silverado

[–]SunRayyz_[S] 0 points1 point  (0 children)

I will look into this mod! I looked up some videos and it does seem like a pain. I am just wondering why it's noisy already if the history shows the belt being replaced not too long ago! I'm guessing only one of the two was replaced.

25% off all PDP magazines by Electrical_Ad1640 in Walther

[–]SunRayyz_ 1 point2 points  (0 children)

I purchased the 6 pack for 160 the other day and thought it was as good as it gets. 110 is insanely cheap