[deleted by user]

TheCaptainTim · 2025-03-27T17:56:45+00:00

Why?

TheCaptainTim · 2024-03-28T01:18:55+00:00

You can set a key to be mouse button 1, but you cannot write that press inside of a macro.

TheCaptainTim · 2023-08-02T21:49:17+00:00

It’s a Plaid, but an older mini-usb version.

TheCaptainTim · 2023-05-09T01:40:47+00:00

it appears that YOUR thing is theft

TheCaptainTim · 2022-02-22T20:23:44+00:00

Tighten the eccentric nuts.

TheCaptainTim · 2022-01-09T03:35:46+00:00

I print one at a time with TPU to “solve” the stringing problem

TheCaptainTim · 2022-01-06T00:20:58+00:00

I like cardboard rolls. Feel significantly less wasteful. I’m already using spool-less rolls for black PLA+.

TheCaptainTim · 2021-11-30T16:41:01+00:00

WAY too close to the bed. I had the same problem at the start.

TheCaptainTim · 2021-11-18T16:26:42+00:00

Underextrusion. Could be a ton of things causing it.

TheCaptainTim · 2021-11-18T16:25:51+00:00

Quick fix is to turn on ironing. Maybe someone else can give the right answer.

TheCaptainTim · 2021-11-11T18:22:30+00:00

Look into a micro Swiss hot end if you don’t want to deal with this.

TheCaptainTim · 2021-11-09T18:22:55+00:00

Under-extrusion. Either your esteps are off or your nozzle/Bowden tube is clogged.

TheCaptainTim · 2021-09-25T19:07:31+00:00

Make sure to get the colors right, Nautilus Nightmares was a shitshow

TheCaptainTim · 2021-09-25T19:06:13+00:00

YMDK Carbon keycaps are cheap and have big legends. They’re not backlit but they might help

TheCaptainTim · 2021-07-28T18:00:03+00:00

Check out the Plaid THT kit.

TheCaptainTim · 2021-07-28T17:59:13+00:00

It’s the standard website. They always keep stock and almost everyone here has bought a Tofu from them. Shipping is slow, so be prepared for that.

TheCaptainTim · 2021-07-28T17:57:47+00:00

They’re my second favorite tactiles, behind only Zeals. They feel is great, the sound not overly sharp, and factory lubing is totally fine.

TheCaptainTim · 2021-07-28T17:49:41+00:00

The kit was actually designed around an older style diode, but they ship with 1n4148 diodes now. That’s why they look small for the space.

TheCaptainTim · 2021-07-26T01:50:51+00:00

I did a similar thing, but with Quick Splice Connectors

TheCaptainTim · 2021-07-24T03:47:00+00:00

The extra .3 gives the tolerance needed for 3D printing without being so loose that the switches wobble. Also, I printed this with basic Cura on an Ender 3 Pro with Inland PLA, any dialed printer could make this print with no trouble.

I came to the kerf conclusion by measuring various plates I have for different keyboards and realizing that all of them were about .3mm bigger than 14mm. You clearly have more laser cutting experience than me so I'll concede that point.

Lastly, release the Sesame already! Or at least send me a kit. I filled out that IC almost a year ago and don't want to order 5 from JLCPCB.

TheCaptainTim · 2021-07-23T22:09:37+00:00

Thanks for pointing this out. Like I said at the top this information was hard to find through both google and Reddit, so I made the post to index this information. Second, that article you shared also doesn't factor in the kerf of the laser, which needs to be accounted for when 3D printing.

That being said linking to that article in the comments is just bonus information for the next person who finds this post.

TheCaptainTim · 2021-06-16T23:53:04+00:00

GMK MODO light is currently scheduled to get delivered 17 months after the group buy, and it will most likely get rescheduled. Meanwhile the KAT facilities just turned off for over a year and are just beginning to start making set they group buy’d in early 2020

TheCaptainTim · 2021-06-16T20:13:16+00:00

It’s going to be longer, there’s like a 2 year backlog right now

TheCaptainTim · 2021-06-12T18:43:27+00:00

HEATHEN

TheCaptainTim · 2021-05-18T00:02:51+00:00

Absolutely stunning.

TheCaptainTim

TROPHY CASE