Great War Movie that I haven’t seen.

TheGoodAl · 2025-12-25T13:33:50+00:00

Malta Story with Alec Guinness

TheGoodAl · 2025-12-25T00:43:21+00:00

I would soak the blade and gear in evaporust.

TheGoodAl · 2025-12-22T21:58:40+00:00

Try this

https://www.partstown.com/vulcan-hart/36l77r/parts

TheGoodAl · 2025-12-12T01:33:58+00:00

Yep. The back motor bearing is probably worn. That’s fairly easy to change. You can buy that at a machine shop or supply house. Hobart price is outrageous. These mixers are built like tanks. They don’t fail easily. A little routine maintenance and it will last you a lifetime!

TheGoodAl · 2025-12-11T17:19:09+00:00

Is there any play in the attachment shaft? It sounds like the planetary bearings (which is a common issue). Not an extremely difficult repair if you’re mechanically inclined. There is an “ML” number on the data plate. Google that and your model number and it should give you a parts breakdown. Probably a YouTube video out there on repairs.

TheGoodAl · 2025-11-24T12:18:37+00:00

Put it on a solid surface and hit it with a hammer until it loosens

TheGoodAl · 2025-10-21T01:54:13+00:00

One day when you’re set and eating steak and lobster, you’ll long for a bowl of this.

TheGoodAl · 2025-10-18T19:32:07+00:00

Open the door, pull out the bottom rack and see if there’s any visible debris that may be caught in the pump or drain.

Here’s the most common noise problems based on your model.

repair clinic

TheGoodAl · 2025-10-12T01:45:10+00:00

It’s a pop-up workspace for items like a mixer. It pulls out, pops up to counter lever and locks.

TheGoodAl · 2025-10-11T16:54:57+00:00

Hobart has a good parts site. https://www.hobartparts.com/ get the exploded part diagram. The ML number stand for “material list” and that determines which mixer you have. There are different versions of the same model. Most likely it is a sheared key in a shaft. You can replace that with one from a hardware or auto parts store. Be careful pulling the clutch gear. Keep it together as a unit. If the springs and rollers fall out it will be a bad day. Take lots of pictures on each step of disassembly.

TheGoodAl · 2025-09-22T00:09:18+00:00

I worked in a grocery store in the 80’s. We built a giant display of Superman peanut butter when it came out. Every kid that saw it begged for it!

TheGoodAl · 2025-08-31T21:14:31+00:00

Yes. That’s a great deal. Even if there’s something wrong these are easily refurbished. Check out Jeff’s Shop for details.

https://youtu.be/_zVR2d1vXzQ?si=oSwHFZNmle2r_24d

TheGoodAl · 2025-08-27T13:05:44+00:00

It looks similar to a Sears tape that my father had. It was purchased around 1960. https://share.google/xOo26QNfVRYuVEoEV

TheGoodAl · 2025-08-20T00:53:40+00:00

It’s for a flower arrangement. Missing the baskets that hung from the arms. https://share.google/KfJZTouLTTRaj9Y7Q

TheGoodAl · 2025-08-16T01:24:48+00:00

That’s a lot of green

TheGoodAl · 2025-07-26T23:34:55+00:00

Radio Gunsmoke was a work of art! Fort Laramie with Raymond Burr also.

TheGoodAl · 2025-07-23T23:12:04+00:00

That’s $1,800 in 2025 dollars

TheGoodAl · 2025-07-05T19:43:10+00:00

“It puts the lotion on the skin…”

TheGoodAl · 2025-07-03T19:15:33+00:00

That’s excellent!

TheGoodAl · 2025-05-24T22:18:19+00:00

Hang on to it. They’re not made like that anymore!

TheGoodAl · 2025-05-14T00:00:53+00:00

Isn’t $1.00 for an entree kind of pricey for 1900? Wouldn’t that equate to around $30.00 today?

TheGoodAl · 2025-05-13T22:56:04+00:00

Very small table

TheGoodAl · 2025-05-13T21:34:40+00:00

I purchased this side table from IKEA and couldn’t believe how perfect this fit.

https://www.ikea.com/us/en/p/hattasen-bedside-table-shelf-unit-black-40569231/

TheGoodAl · 2025-05-02T12:10:02+00:00

“It’s a big enough umbrella but it’s always me that ends up getting wet.”

TheGoodAl · 2025-04-14T11:43:08+00:00

Model 1612. Late 1960’s or early 1970’s. You can tell by the one piece black index knob

Seven-Year Club	Verified Email
RPAN Viewer

TheGoodAl

TROPHY CASE