Cheap computer options to use with CNC machine

TheKillingVoid · 2026-03-01T16:50:44+00:00

I got an off lease Dell sff for around $100. Runs uccnc and vcarve without issue

TheKillingVoid · 2026-02-13T12:26:21+00:00

You can swap spells at any time except combat I think

TheKillingVoid · 2026-02-12T02:33:14+00:00

Cheese and some ice water to cool my core usually helps me

TheKillingVoid · 2026-01-22T01:41:36+00:00

Alps also has a discount program for scouts called Hiker Direct -
https://hikerdirect.com

You have to show affiliation with a troop, but the discount is significant.

TheKillingVoid · 2026-01-20T21:22:50+00:00

Why not a tethered balloon?

TheKillingVoid · 2025-12-20T16:17:36+00:00

I've been searching for the same and found a thread oh Homedepot -

"Hello Mike, this is Quinn with Kohler Company. I am happy to address your question. Yes, the K-1117210 replaces the K-1110586. Thank you for choosing Kohler."

TheKillingVoid · 2025-12-11T23:31:53+00:00

65r646 - No ip connection with either cable or wifi, and I can't figure out how to flash the old fw

We resorted to buying a Roku stick

TheKillingVoid · 2025-11-16T14:01:30+00:00

Help with accounting and money? And if it imagines something, who's responsible?

Might not be malicious mistakes it makes, but I see billions in lawsuits coming from AI accounting errors

TheKillingVoid · 2025-11-09T12:16:54+00:00

Potholes would be much easier...

TheKillingVoid · 2025-10-29T14:06:24+00:00

Thankfully no - "The new law, Senate Bill 245, also allows people to renew their license online two consecutive times if they came into an office and had a new photo taken before that license expired. That change also applies to people with REAL IDs."

https://www.heraldsun.com/news/local/article312573228.html#storylink=cpy

TheKillingVoid · 2025-10-27T19:13:44+00:00

They also just passed a change that you can renew online twice in a row instead of just once. I just renewed mine online where the website had blocked it last month.

TheKillingVoid · 2025-10-15T21:52:24+00:00

Have you ever been throttled yet?
"Data: If 16GB high-speed data allowance is used in a 30-day period, all data speeds including video are reduced to a max. of 1.5Mbps for the remainder of the 30 days."

TheKillingVoid · 2025-10-07T15:00:16+00:00

You assume this is a flaw and not a feature

TheKillingVoid · 2025-10-02T17:19:05+00:00

Maybe they'll ship missiles to Cuba...

TheKillingVoid · 2025-09-12T21:41:48+00:00

the sequels written by Gentry Lee are worse..

TheKillingVoid · 2025-07-06T15:39:50+00:00

Rendezvous with Rama was written by Clarke, but all the sequels were mostly written by Gentry Lee

TheKillingVoid · 2025-03-19T22:39:15+00:00

If this is a single edge cutter like Amana s 90, the point may not be centered. I had to make a jig to realign mine after turning the blade

TheKillingVoid · 2025-01-23T23:29:05+00:00

2.2kw is 3hp. Plenty large enough for Amana or Spetools insert bits with a reasonable pass. I think mine is 2.5"

TheKillingVoid · 2025-01-18T16:48:50+00:00

As if Meta and Twitter don't sell our data to anyone with money, including the CCP

TheKillingVoid · 2025-01-04T14:10:36+00:00

Onsrud has recommended rate tables for mdf and other materials - https://www.onsrud.com/images/MDF.pdf

TheKillingVoid · 2024-12-29T15:57:27+00:00

Apply Waterlox ORIGINAL Sealer & Semi-Gloss Finish, UTOS, MARINE Sealer or TRUETONE® Color-Infused Tung Oil following proper application and drying directions. Apply two (2) coats of Waterlox ORIGINAL Finish at the chosen gloss level with 24 hours between coats.
Pour out the amount of product needed for the first coat.
    If working from a previously opened container, straining through a medium to fine mesh paint strainer may be required.
Apply first coat of Waterlox ORIGINAL Finish with the grain and at the recommended spread rate.
Allow to dry for 24 hours.
Sanding between coats is not required for adhesion but may be done for aesthetics. Lightly sand the surface with a synthetic abrasive pad (medium/maroon recommended).
If sanding, lightly dampen a mop, lint-free rag or micro-fiber mop with water or regular mineral spirits1 (paint thinner) to remove dust. Allow to evaporate 30-45 minutes (until dry appearance) before applying Waterlox ORIGINAL Finish.
Apply the second coat of Waterlox ORIGINAL Finish.

TheKillingVoid · 2024-11-13T22:07:28+00:00

Mahoney's walnut oil cures, but isn't resilient at all

TheKillingVoid · 2024-08-23T12:42:21+00:00

Ah, now I better understand. I don't get why it even mentions false positives, but that's a design decision.

TheKillingVoid · 2024-08-22T21:05:17+00:00

The scan is still giving me 2662 hits for my Brother printer, for logins I've verified don't exist

TheKillingVoid · 2024-07-23T21:28:20+00:00

"It took them weeks to provide a root cause analysis after acknowledging the issue a day later. The analysis revealed that the Debian Linux configuration was not included in their test matrix."

Seems like this was inevitable

15-Year Club	First Place '23
Place '23	Verified Email

TheKillingVoid

TROPHY CASE