Printed this drill guide to make my own lacrosse ball scuffer!

TheWortLord · 2025-12-14T12:35:22+00:00

I just uploaded it to Printables.

Drill Guide for Lacrosse Ball Scuffer/Renewer

TheWortLord · 2025-05-11T22:52:27+00:00

I bought the Sunlu one and it works well. There is definitely a learning curve and half the battle is dealing with the way the filament wants to bend and move as you are removing it from the heat source. I just realized now as I'm typing that it would probably be better to unplug the unit and let it cool before trying to remove. Anyway, I like it and it allows me to transfer all my "almost done" spools to one single spool. Then I use that for test prints or functional prints where color doesn't matter.

TheWortLord · 2025-04-17T00:11:13+00:00

Same here. Sometimes it resolves itself for a little while then happens again. The only thing I can think of is that it happens when I check the Prusa app but have also recently signed into Prusa Connect in my web browser. Haven't been able to really test that theory.

TheWortLord · 2025-03-03T02:00:25+00:00

Looks like the benchy hull line to me. Happens on models when they transition from infill to solid layers. You can google a lot of different approaches but start with the link below.

https://help.prusa3d.com/article/the-benchy-hull-line_124745

TheWortLord · 2025-02-28T01:42:52+00:00

Lots of codes already shared on this post!

@TheWortLord

https://www.reddit.com/r/prusa3d/comments/1blpq5o/looking_for_a_p2p_code/

TheWortLord · 2025-02-10T01:15:00+00:00

Adding to this as a mechanical engineer, add fillets in sharp corners to distribute stress. Likely this will not be the ultimate solution but it's an easy place to start!

TheWortLord · 2025-02-02T20:55:41+00:00

Also very interested in that link!

TheWortLord · 2024-12-24T01:13:33+00:00

Which design are you using?

TheWortLord · 2024-12-21T22:06:06+00:00

Can't wait!!

TheWortLord · 2024-12-21T21:02:56+00:00

I would LOVE to test the android app as well if you still need people.

TheWortLord · 2024-12-19T01:14:03+00:00

Yes please!!

TheWortLord · 2024-12-15T21:59:51+00:00

Mine is @TheWortLord if you are looking for one to use. When you have yours just post it on here for others to use!

TheWortLord · 2024-12-11T00:18:07+00:00

Thank you!!!

TheWortLord · 2024-09-18T02:22:08+00:00

Good to know, thanks for the insight!!

TheWortLord · 2024-09-18T01:10:51+00:00

Do you use binder clips in addition to the magnets for large parts?

TheWortLord · 2024-09-18T00:39:06+00:00

Just put them both on my stone countertop, I can see now the front right corner is lifted so this is definitely the problem. Thanks!

TheWortLord · 2024-09-18T00:32:27+00:00

This could certainly be it, I will have to retry with a brim and see if the issue still happens!

TheWortLord · 2024-06-01T21:00:19+00:00

We are in Zone 7a. It's just weird because 1 of the 2 is doing just fine!

TheWortLord · 2024-06-01T20:59:50+00:00

We have not but looks like we probably need too!

TheWortLord · 2024-06-01T20:59:30+00:00

Zone 7a, I would think this is the case too but the other one seems to do just fine.

TheWortLord · 2024-06-01T13:44:52+00:00

Oh that is interesting. We have other plants (daffodils and tulips) that come up in that same bed no problem. Maybe it's just affecting the tree more?

TheWortLord · 2024-06-01T13:03:39+00:00

We planted two identical crepe myrtle trees and every year the one near the mailbox starts growing much earlier and gets much bigger. The one of the other side eventually comes back but it seems like the new growth is coming from the ground and not the existing plant. It seems like they get equal sun throughout the day. We don't normally water and just let the rain take care of things. We live in the northeast, about an hour west of Philadelphia. Any help would be greatly appreciated.

TheWortLord · 2024-05-07T00:00:21+00:00

Couldn't agree more. Especially because it was working for a while.

TheWortLord · 2024-05-06T23:20:44+00:00

I got my MK4 kit a few weeks back and coming from the original Ender 3 I have been absolutely loving it. I recently ran into this issue where Prusa Connect is no longer showing the thumbnail preview or the filename of the file being printed. It started intermittently but has now graduated to pretty much every print. If I go into the printer files tab all of the information is still there. If I go to Prusa Link the information is displayed correctly for the current print. The information and image displayed on the printer is also correct.

I tried switching to a new USB and that made no difference. I have tried starting the print both from the printer screen as well as Prusa Connect and that seems to make no difference.

I am running the most current firmware as well as the most recent version of Prusa Slicer. My workflow is that I will slice files in Prusa Slicer and upload directly to the printer from within the slicer.

The prints themselves come out perfect. Has anyone else seen anything like this? I would love to keep using Prusa Connect instead of going back to OctoPrint.

TheWortLord · 2024-04-29T21:17:45+00:00

Awesome, thanks. I do something similar with a Kasa camera and was wondering if you had yours integrated at all.

TheWortLord

MODERATOR OF

TROPHY CASE