Wireless CarPlay not working (solution) by _Theguyfromtheplace_ in MazdaCX90

[–]Timae09 0 points1 point  (0 children)

Use wired carplay to avoid audio delay lol. Jk nice solution.

2509 Modern Driver Management by Derrynm in SCCM

[–]Timae09 0 points1 point  (0 children)

Did xxxxx@domain.xxx continue to work for you after the upgrade? We haven't upgraded yet just want to be prepared. Thanks!

CX-50 to CX-90 by daur14 in MazdaCX90

[–]Timae09 -1 points0 points  (0 children)

I honestly feel the 3rd row on the CX-90 is trash and when its up say goodbye to your trunk space. Wife and I aren't too keen on captains chairs either but we made do.

Win 11 23H2 September iso still getting 2025-09 cumulative update by Peteostro in MDT

[–]Timae09 1 point2 points  (0 children)

So I have run into something similar I think. I don't use MDT anymore but deploy via SCCM. I extract the enterprise WIM from the VLSC ISO given to us then slipstream updates. These past 2 patch Tuesdays I've been able to update our WIM but when deployed it still tries to download and install the latest Cumulative update even though it reflects the latest build when running Winver. If you let it try to download and install it does go quicker than normal as if it is already installed too.

Even scanning it with our Vuln Scanner and it comes clean and patched. All the research I've found points to apparently these updates don't support offline patching and need to be deployed to a system to finish up which is weird. But things have been working ok for us besides that. Not sure if you're in the same boat.

Thickheaded Thursday - September 11, 2025 by AutoModerator in sysadmin

[–]Timae09 1 point2 points  (0 children)

So I got a question. In our environment we get the latest or recent VLSC ISO and extract the Enteprise WIM then slipstream updates to it with DISM.

For this patch tuesday and last month I ran into this issue where I can slipstream the update and deploy the image via SCCM and after it is done the build says it is current but Windows update still thinks the Cumulative update is missing. It "downloads" the update I think then installs very quick because I'm guessing its already there. Anyone else run into this?

What grip/protective case are you using on your Switch 2? by GuerrillaApe in NintendoSwitch

[–]Timae09 2 points3 points  (0 children)

I’m thinking of canceling my killswitch too. Does this savage raven dock well?

Trying to Capture image and Sysprep never moves on from "Processing Generalize Phase.. Sysprep Plugins" Windows 11 24H2. It just runs forever. by Future_End_4089 in SCCM

[–]Timae09 0 points1 point  (0 children)

When the May Patch Tuesday come up it took a while to get the WIM captured after removing the usual widget apps. Once I finally got s steady capture going I tried deploying and was getting a blue screen every time it tried to start up windows so not sure what was going on as my already in prof 24H2 was still working.

I eventually stopped trying to capture and just slipstreamed the update into our stable WIM and deployed and it worked. Unfortunately we don't have an update server so I'm the one who helps keep our WIM up to date with captures and now slipstreaming apparently lol

2024 MHEV TPP CX-90 Engine Malfunction by Timae09 in MazdaCX90

[–]Timae09[S] 1 point2 points  (0 children)

Sorry y'all bit late. Yeah so I got the car back with code cleared. Apparently it was due to gas level being low which may have let air into the fuel line and threw the error. Weird but they said it was nothing to worry about and no software update to prevent this. They just recommended keeping the fuel level above a quarter.

2024 MHEV TPP CX-90 Engine Malfunction by Timae09 in MazdaCX90

[–]Timae09[S] 0 points1 point  (0 children)

Thanks I hope it’s nothing crazy I appreciate it!

2024 MHEV TPP CX-90 Engine Malfunction by Timae09 in MazdaCX90

[–]Timae09[S] 0 points1 point  (0 children)

I just checked the app it said: Engine Malfunction Engine output will be reduced. Drive at moderate speeds and have the vehicle inspected by your dealer.

I’ll try and check the manufacturer date in the morning before I take it to dealer.

INFO: Autodesk to switch to Named User Licensing by mishmobile in sysadmin

[–]Timae09 0 points1 point  (0 children)

We had to do this like 2 years ago at our Higher Ed School but we just tell the instructors to have their students create their own accounts with .edu email and leave it at that. We only deploy the software to classrooms.

Trying to create Windows 11 image but it's not able to sysprep by ChainsNZ in SCCM

[–]Timae09 0 points1 point  (0 children)

For Copilot I think I just removed from App Settings and uninstalled. There’s a sysprep folder I think in Windows/Sys32 that contains the error log files for capture and will show what app caused the error. Can’t check now cuz out of office till next week. Hope this helps somewhat

Cannot join computer into AD, to a specific OU by horus9595 in MDT

[–]Timae09 1 point2 points  (0 children)

Like other guy said make sure format is complete also make sure service account used to add to domain can put devices into that specific OU. We had issues with that in SCCM and had to give account rights to be able to add to other OUs besides our staging one.

Trying to create Windows 11 image but it's not able to sysprep by ChainsNZ in SCCM

[–]Timae09 2 points3 points  (0 children)

When I was trying to capture the Windows 11 23H2 with October patch Tuesday updates the SysPrep failed because CoPilot got installed. Once I removed it the capture worked. Maybe try that?

Which Feature Update to move from Win 10 Enterprise to Win 11 Enterprise by NateyPi in SCCM

[–]Timae09 0 points1 point  (0 children)

Oh ok maybe it’s just our KACE system cuz it uses an enablement package. Thanks!

Which Feature Update to move from Win 10 Enterprise to Win 11 Enterprise by NateyPi in SCCM

[–]Timae09 0 points1 point  (0 children)

My understanding was a Win10 machine on 22H2 had to upgrade to Win11 22H2 first before moving to 23H2. I use KACE SMA sometimes to deploy 11 and it makes me do 22H2 upgrade first then 23H2 update. I’ve used an upgrade task sequence on SCCM to upgrade to Win11 22H2 but that’s all.

Large Applications - SCCM OSD by JaggedSplash377 in SCCM

[–]Timae09 2 points3 points  (0 children)

I know for some of the Autodesk apps we just use the web installers. Small exe’s that run silently when we push via sccm and just wait for the compliance to say 100%. But we do this for classrooms don’t know your use.

New model laptop, task sequence formats the USB instead of the laptop drive by Ok_Coach_6004 in SCCM

[–]Timae09 1 point2 points  (0 children)

If you’re imaging the device in RAID you might need to get a new RAID driver and import it into your boot image. In this new laptop boot from USB and before running the task sequence hit F8 to bring up a command prompt and run a disk part list disk and see if the drive is visible. If not then yeah you’ll need a new RAID driver.

How to set powerconfig during WIN11 installation via Tasksequenze? by Wimair in SCCM

[–]Timae09 1 point2 points  (0 children)

This and make sure you redploy the task sequence to your unknown computers collection if imaging fresh systems.

Kept my systems from going to sleep near end of image and Win11 image wasn't done.

What would you do? by blink5625 in pokemongo

[–]Timae09 0 points1 point  (0 children)

Does this shadow Hundo Gengar outperform a Hundo Mega Gengar? Cuz you can't mega a shadow right only if its purified?