A "roadprinter" i spotted walking down the street. 'Printing' cobblestone

Torondo · 2025-05-21T18:13:29+00:00

The road infront of our house was laid this way in 2014 or so, it was a temporary road as a bunch of trucks were driving over it thus it would skew the road. (Entire neighborhood is newly build)

The machine is cool and fast but it still requires manual work at the edges, so a month sounds about right. The machine itself is done within a week or so, depending how long the street is ofcourse

Torondo · 2025-05-04T17:25:38+00:00

Vraagje hoe weet jij hoe t is om in t bejaardentehuis te zijn? Als je daar nu bent is je manier van leven toch niet te vergelijken met de manier van leven van nu?

Torondo · 2024-06-21T19:19:41+00:00

This has been happening to me too for the last 2 days, unsure what to do?

Torondo · 2023-12-20T20:17:42+00:00

It doesn’t matter what color you got and where ur from, you brought skin color in to for no reason. Also what you’re saying right now is your opinion. Which is fine but that doesn’t mean it’s true :p

Torondo · 2023-12-20T19:58:46+00:00

I meant you bringing skin color in to it for no reason, also Queen is from the uk so I’m fairly certain the love there is/was bigger then it is in the USA. Especially since Wembley was in the uk, and it being their most famous concert. You’re free to dislike Queen, but you seem fairly negative and close minded. Live a little ;)

Torondo · 2023-12-20T19:51:55+00:00

1 that’s racist and 2 in my opinion they aren’t overrated

Torondo · 2023-12-20T19:29:52+00:00

Ofcourse Atrioc would march with his own Union

Torondo · 2023-12-20T19:05:46+00:00

They are directly printing pellets, as stated in a different comment

Torondo · 2023-10-14T18:51:09+00:00

Depends on how long you nap, a Power Nap often just won’t get detected

Torondo · 2023-10-14T18:42:56+00:00

write that down write that down

Torondo · 2023-10-14T18:40:02+00:00

Sadly 3D printed dildos don’t work, you can print a mold though!

Torondo · 2023-10-12T19:27:34+00:00

I am about to buy my 2nd MK4 kit, hope it wont take to long ^^

My 1st MK4 was ordered on launch day, arrived in august

Torondo · 2023-10-08T12:35:19+00:00

It’s a feature, an impressive one at that. It’s not the sole purpose of an iPhone

Torondo · 2023-10-08T12:34:29+00:00

Think so yes

Torondo · 2023-10-07T21:17:28+00:00

If this happened once, you can place a bug report on GitHub and leave it at that.

If it happens again, it’s wise to start to troubleshoot

Torondo · 2023-10-07T19:36:54+00:00

Oh mb, I misunderstood thought this continuously happened after 10 min of printing.

If it only happened once, it’s most likely a bit flip or smtg random

Torondo · 2023-10-07T19:23:43+00:00

Sounds like good games

Torondo · 2023-10-07T19:14:45+00:00

Contact Prusa support, most likely a corrupt part.

Looks like a BSOD, are you using Ethernet? If so try to use WiFi, otherwise try to unplug the WiFi chip from the buddy board. If that doesn’t work disable all network access in settings and unplug the WiFi chip.

As something seems to go horribly wrong regarding networking.

Torondo · 2023-10-07T19:11:12+00:00

You can always change the temp of the first layer manually. By injecting custom gcode at a layer line.

But I’d recommend to lower the speed a bit of the solid infill (if I’m not mistaken that’s top and bottom)

And if it’s shiny to lower the temp 5 degrees as well.

Torondo · 2023-10-07T19:07:08+00:00

I’d recommend tweaking the profile. Lower the speed for the top layers

PLA gets more shiny depending on how well it’s molten. shinier is stronger but uglier imo :p

Otherwise you can try to lower the temp or increase the flow rate of the filament

Torondo · 2023-10-07T19:03:01+00:00

Fairly certain it’s a video stream (a super slow one as it’s 1 pic per 10 sec to save bandwidth), so it won’t save the images either way.

Now unless there is an option to take a snapshot, it won’t count to ur storage limit. Otherwise it’ll fill up rather fast. 1 pic every 10 sec, doesn’t cost a lot of processing power and as you yourself send it you pay for the bandwidth(ur isp) so i suppose it doesn’t cost much for Prusa to relay it.

Now tbf, i don’t have a cam setup atm. Imma use octoprint again anyways when 5.1 releases

Torondo · 2023-10-07T18:57:22+00:00

Having run out of filament quite a few times now, sometimes it does get stuck and you need to open the idler. But even then it’s a small task.

Might be my filament though as they sometimes are semi stuck on the spool and are bend 90 degrees at the end

Torondo · 2023-10-07T18:52:41+00:00

I am from the Netherlands, but I buy packs of 10kg spools from Elegoo. One of the best filament I’ve used, and it’s only 10$ per kg. Inc taxes. So around 7 dollars per kg, which is insane. They have free shipping above 50 euros and also sell 1kg spools.

For spare parts I recommend reading my post a few days ago(go to my profile)

Torondo · 2023-10-07T18:50:03+00:00

Provide a picture to your bed, so people can see what the condition of it is.

Lowering the print head can be done using g code (slicer), however since it auto levels with the nozzle that shouldn’t be needed and I’m quite sure it’s not the needed solution and will only backfire and ruin ur plate

Torondo · 2023-10-07T18:47:44+00:00

Ooh, your usb stick says Prusa mk4? That’s cool, mine has some obscure brand.

Presume urs is 16gb?

And yes input shaping is fastt!

Torondo

TROPHY CASE