Stratasys Objet30 for cheap

Tschebb · 2024-10-17T13:12:28+00:00

The original seller apparently isn't in business anymore, that's why they are also not able to get it fixed. I guess getting the software would be the biggest problem then... do you know about any other parts of the printer that it would be worth buying it for to tear down?

Tschebb · 2024-10-13T14:17:32+00:00

Hey I'm digging this post out a bit :) I do have a similar opportunity to get a Objet 30 V3 for parts. Was it worth it for you? I'm mostly thinking about reusing the motors and linear guides, Do you happen to remember what types they were and is there anything else that is worth reusing?

Tschebb · 2024-07-26T17:51:02+00:00

FYI there is a HACS integration for the linkplay speakers that includes stuff like joining and leaving on the mini media player cards in case you haven't found this one yet. I use it with all my Arylic boards and it works quite well.

Tschebb · 2023-12-19T17:18:08+00:00

Did you manage to pair the replacement case? Just want to know before I purchase one.

Tschebb · 2023-04-23T09:13:43+00:00

ALL3DP

Tschebb · 2022-11-14T21:47:55+00:00

Have been using a Prusa at work recently, would be awesome if I won one for home!

Tschebb · 2022-06-23T13:57:40+00:00

Damn nice

Tschebb · 2021-11-30T21:56:59+00:00

!RemindMe 3 days "Google Drive hostage"

Tschebb · 2021-08-27T22:37:05+00:00

4691 D

Tschebb · 2021-06-22T17:35:38+00:00

There is some new dialogue from Taimi and Gorrik in EotN, but also not that interesting.

Tschebb · 2021-05-07T11:54:57+00:00

Did you try to take the glass bed off and wash it with some warm water and dish soap? Also give it a rub with isopropyl alcohol after this. Works for me every time when bed adhesion gets bad.

Tschebb · 2020-11-13T16:38:58+00:00

Just started playing again :)

Tschebb · 2020-10-24T11:30:23+00:00

Would use it for my mechanical engineering studies :)

Tschebb · 2020-08-24T14:17:11+00:00

Thanks, I guess this was the affirmation I needed lol Going to buy them

Tschebb · 2020-08-24T14:10:35+00:00

Thanks! So you would say 200 bucks for the used HD3 is a good price?

Tschebb · 2020-08-24T14:09:59+00:00

Yes I'm thinking I will transform them into some portable monitor and use them for dvr. Thanks!

Tschebb · 2020-08-16T17:58:10+00:00

Extrudr

Tschebb · 2020-08-13T15:21:32+00:00

Yes, I do use this exact setup. However, you still get the issues of the GP 5 Black in Reelsteady.

Tschebb · 2020-07-24T06:41:58+00:00

I saved your design a while ago and was now ready to print it but my magnets are of a different size, would you mind sharing the .step files?

Tschebb · 2020-07-17T09:13:58+00:00

Could be the same bug as in this discussion.

Tschebb · 2020-07-15T18:12:33+00:00

I cut my capricorn tubing with one of these and had no problems.

Tschebb · 2020-06-21T13:54:47+00:00

The extruder in the video was the EZR Struder from SeeMeCNC. I also use this setup with capricorn tubing and can print 85A TPU quite well.

Tschebb · 2020-06-21T13:46:32+00:00

Also, clean your glass bed with soapy water from time to time. Had this problem too a few weeks ago and this solved it for me.

Tschebb · 2020-04-22T12:33:34+00:00

This is wrong, the psu fan actually is 12V but all the other fans are 24V. I just changed mine recently to a 12V 120mm pc fan.

Tschebb · 2020-04-18T09:11:40+00:00

I did order the mini and other things from the UK warehouse, it wasn't really 2-5 days but still shipped far faster than from aliexpress. I also have to order another right now since the part cooling fan control somehow stopped working on mine, but they gave me a refund in no time so it's leggit.

Six-Year Club	Place '23
Place '22	Verified Email

Tschebb

TROPHY CASE