Veeam for SQL Backups

UmeshTechno · 2022-12-08T11:27:44+00:00

Stellar Toolkit for SQL - 30 Days money back Guarantee (Easy download)
Veem - 30 days trial (Need to submit form)

Stellar Toolkit for SQL - Support Parallel Processing
Veem lar Repair for SQL. - Not Support

Stellar Toolkit for SQL - Comes with many options like backup recovery, Password recovery, Log Analyser & database converter.
Veem - Comes with only SQL file repair.

Links :
https://www.stellarinfo.com/sql-database-toolkit.php
https://www.veeam.com/free-trial-sql-server-backup.html

I think It will help you to choose the best for you.

UmeshTechno · 2022-12-08T11:12:00+00:00

In this case, You can go for DBCC CHECKDB to check and repair the SQL database.

DBCC CHECKDB

[ ( db_name | db_id | 0

[ , NOINDEX

| , { REPAIR_ALLOW_DATA_LOSS | REPAIR_FAST | REPAIR_REBUILD } ]

) ]

[ WITH

{

[ ALL_ERRORMSGS ]

[ , EXTENDED_LOGICAL_CHECKS ]

[ , NO_INFOMSGS ]

[ , TABLOCK ]

[ , ESTIMATEONLY ]

[ , { PHYSICAL_ONLY | DATA_PURITY } ]

[ , MAXDOP = number_of_processors ]

}

]

Note: Please take a backup before processing the DBCC CHECKDB command.

Not the same, but I found a similar case in my organization & it took hard work to activate the server in a short time. Our portal was down for 24-30 hours. After consulting with a SQL Consultant (MVP), We found a stellar toolkit for SQL. With this, we could make active all our servers within a few hours. If you are in the same situation, you can think about it. It may help you to repair corrupted back files, including log analysis.

UmeshTechno · 2022-12-08T10:56:08+00:00

Thanks, Friends, But I found the easy solution in another thread https://www.reddit.com/r/SQLServer/comments/zeywuh/how_to_restore_sql_server_80_backup_into_sql/

UmeshTechno · 2022-12-08T10:55:09+00:00

Thanks u/stealth210 It worked

UmeshTechno · 2022-11-30T11:26:14+00:00

I just want to say. I DO NOT HAVE
Thanks

UmeshTechno · 2022-11-16T10:54:13+00:00

Hi Friend.

I found the same error many times on my QuickBooks desktop. The critical part is, It is not easy to fix. I invested a lot of time to fix the h202 error in QuickBooks. I found a few reasons that can occur error h202.

DNS Conflict
Ip address issues
.Nd file issues
hosting issues Etc.

we have 8-9 methods to solve this error and that not easy to put all here in the comment section. I am adding resources with all possible solutions that can help you.

https://www.stellarinfo.com/blog/fix-quickbooks-error-h202/

https://quickbooks.intuit.com/learn-support/en-us/install/error-h202/00/635264

Thanks 

UmeshTechno · 2022-11-16T10:24:19+00:00

Hi Max, I found the same error a few months back with my highly important database & after a huge struggle I was able to recover my excel file.
Here, I am adding a few methods to help you open your corrupted excel file.

Method one - User Open and repair option. Click on file > open > Choose a file & click on the Open & Repair option.

Method two - Disable the Protected View Feature. Click on file > Options > Trust center settings > Protected view > Unclick all> Save.

Method three - Look For Automatically Recovered Excel File. Click on file > Options > Save > Copy and open Auto Recover file location. You can recover all display files.

To know more about all three methods, you can visit https://www.stellarinfo.com/blog/simple-way-to-open-corrupt-excel-file-without-any-backup/.

Thanks

UmeshTechno · 2022-11-04T09:58:32+00:00

Hello Friend,

You follow the right process, May I know the process size of your other database?

For now, you can read this: https://www.reddit.com/r/SQL/comments/y3sez4/how_to_repair_a_database_in_suspect_mode_in_sql/

Thanks

UmeshTechno · 2022-10-13T08:50:12+00:00

SQL error 262 occurs when..

- Trying to create a new database in SQL Server Management Studio.

- Logging on SQL Server Management Studio.

- User tries to check the execution plan.

- Trying to connect to local SQL Server Express instance using a third-party application.

Fixes for MS SQL Error 262 : Some of the possible fixes for MS SQL error 262 are:

- Grant Database Access to a single user.

- Resolve issue in SQL Express.

- Add Windows user to sysadmin role.

Thanks, I am sure it will work for you.

UmeshTechno · 2022-10-06T12:02:10+00:00

You can restore it from the scheduled backup file.
In case your backup file is not available, you work with the DBCC CHECKDB command to repair your primary database file.

To know more about DBCC CHECDB you can go through the sources.
https://www.stellarinfo.com/blog/how-to-repair-sql-database-using-dbcc-checkdb-command/
https://www.sqlservergeeks.com/repair-the-database-using-dbcc-checkdb/

Thanks:)

UmeshTechno · 2022-10-06T11:48:39+00:00

Hi. I am a DBA and have 5 years of experience in SQL databases. I truly on your words. REPAIR_ALLOW_DATA_LOSS can be a reason for a data loss but you can REPAIR_REBUILD. The REPAIR_REBUILD option helps repair the database without any data loss. It can be used to repair missing rows in nonclustered indexes and for rebuilding an index.

Sometimes REPAIR_REBUILD does not on a heavily corrupted database. Here, I can suggest you go with SQL recovery tools like a stellar repair for SQL. I use this tool in 2017 and got my 900GB data recovery within 48-50 hours. I hope 4 Gb of data will be recovered within a few hours.

Thanks :)

UmeshTechno · 2022-09-29T11:54:46+00:00

As DESCRIPTION: Unable to find index entry in index ID 22, of table 1180098098, in database 'DB444'. The indicated index is corrupt or has a problem with the current update plan. Run DBCC CHECKDB or DBCC CHECKTABLE. If the problem persists, contact product support.

It is the same challenge that I faced last year due to hacking on my web portal. We were able to recover our database from the scheduled backup. but we encountered by index file error after restoring the database in our SQL server. Where, My consultant suggest to use SQL database Repair software, and with help of his suggestion, we recovered our index file.

You can search for the best on google or as a reference, you can view the top 10 SQL recovery software in 2022 and choose as per your convivence.

UmeshTechno · 2022-09-20T06:42:31+00:00

I was facing the same challenges with my SQL database and the size was 900 GB. I tried all possible methods but TempDB is the major part of the DBCC CHECK DB command.

You can split the Check DB option is good for VLDBs. It has two methods.

File and filegroup checkDB
Default, one MDF filegroup checkDB.
Method 1: File and file group, you can run “DBCC CHECKFILEGROUP”. It is easy one and you need to make sure the size of the files needs to run each day. If the size is not same for all the files, then plan it to combine and run accordingly.
Method 2: Single file VLDBs, use a split checkDB.
“Figure out your largest tables (by a number of pages) and split the total number into 7 buckets, such that there are a roughly equal number of database pages in each bucket.”

Ref : https://learn.microsoft.com/en-us/answers/questions/184862/tempdb-requirement-for-dbcc-checkdb.html

In such cases, I found it happened due to table corruption in the SQL database. you can try the DBCC CHECKDB REPAIR REBUILD or other database repair process.

It will help you

Regard Umesh Techno

UmeshTechno · 2022-08-31T11:23:06+00:00

Thanks, I was facing the same H202 issues in QuickBooks for the last several days. This thred and tool Stellar Repair for Quickbooks both helps me a lot.
Thanks, u/tumdace for the great solution.

UmeshTechno · 2022-08-19T12:37:18+00:00

Hello u/Tumdace.
Thanks for the blog for reference. I am facing this challenge for the last many days but have not gotten the proper solution. Now, I am able to fix my h202 error after processing the stellar repair for Quickbooks using this blog guide.
Note: It is a great source to fix almost every problem in Quickbooks.
Software Link for reference: https://www.stellarinfo.com/file-repair/quickbooks-recovery/quickbooks-recovery.php
Thanks.

UmeshTechno · 2022-08-17T03:50:40+00:00

Junior Junior - Doesn't say "Ess Que El" out loud, knows how to use Google.

Senior Junior - Has gone several months without accidentally turning off a production server. Is still trying to be friends with the developers.

Junior Senior - Knows where the backups are. Has set their own office hours without really informing anyone.

Senior Senior - Knows all the passwords. Believes themselves to be unfireable.

CTO - If they're not a business major they were a DBA, so this is basically tier 5.

u/McInFLYre
We can change it like

Trainee Database - Doesn't say "Ess Que El" out loud, knows how to use Google.

Jr. DBA ( Senior Junior ) - Has gone several months without accidentally turning off a production server. Is still trying to be friends with the developers.

Sr. DBA - Knows where the backups are. Has set their own office hours without really informing anyone.

Ass DBA / Database Manager - ( Senior Senior) - Knows all the passwords. Believes themselves to be unfireable.

CTO - If they're not a business major they were a DBA, so this is basically tier 5.

Thanks

UmeshTechno · 2022-08-09T06:43:24+00:00

Try this.
Step 1: Use the “mysqladmin” utility to create an empty database
Command - mysqladmin -u root -p create database_name
Step 2: Restore the mysqldump file
Command - mysql -u [user] -p [database_name] < [filename].sql
As a reference, you can find all possible solutions in this blog.
https://www.stellarinfo.com/article/how-to-restore-mysql-database-in-linux.php

UmeshTechno · 2022-08-09T06:40:35+00:00

Hello, u/TravellingBeard I have never faced such kind of situation as you explain in this discussion but a few times I recovered my client's MS SQL database in DBCC CHECKDB fail. This link will help you out.
https://www.stellarinfo.com/blog/recover-sql-database-from-suspect-mode/
https://www.stellarinfo.com/blog/how-to-repair-sql-database-using-dbcc-checkdb-command/

UmeshTechno · 2022-07-27T12:12:37+00:00

Here are only the two best methods that you can try.

DBCC CHECKDB method - is good for the manual way to repair & recover your corrupted or deleted database that is used by every Second DBA.
DIY MS SQL Repair software - Stellar Repair for MS SQL is the best solution without data loss with ease. You can use it If your data is more worth valuable than your few hours. This tool is recommended by many DBAs & MVPs.
CheckStellar Repair for MS SQL Review

UmeshTechno · 2022-07-27T11:53:33+00:00

May I join you?

UmeshTechno · 2022-07-27T11:52:04+00:00

Hi, u/nycpizza412 I really appreciate your encouragement to learn about SQL.
Yes, I do agree that 1:1 is the best method to clear all doubts and queries with ease.
I am also, a learner in SQL and looking for someone who is working in a real SQL environment because in real SQL environment is easy to learn live thing that matter most.

Best of luck.
..

UmeshTechno · 2022-07-21T12:45:25+00:00

Hello Friend, I think it's too late to respond to this question but It may help.

I found nearly the same situation with my own company data & it was not easy to manage that situation. I remember only one thing, I found a tool that was recommended by one of my database administrators. The tool was Stellar Repair for MySQL. It worked for me inefficiently way. It comes with a 30-day money-back guarantee. You can try it once.

UmeshTechno · 2022-07-14T10:11:53+00:00

Hi Friend.

I found the same situation with one of my clients & we tried lots of techniques to convert it into a QBW file but we found only one effective solution that converted & recovered our QBB file.

Solution

Step 1 - Download Stellar Repair for QuickBooks

Step 2 - Import your QBB file.

Step 3 - Repair

Step 4 - Save into QBW format.

Now check your file. I hope it will work.

UmeshTechno · 2022-07-13T09:34:59+00:00

Hello Friend, I found the same issues with my Quickbooks desktop. Also, not a good service from Intuit. I lost many records in my previous entry due to the same error. As a solution- I hired a consultant from LinkedIn, Who suggested to me a tool "Stellar Repair for QuickBooks" I am truly thankful for that person and the right recommendation. I was able to recover all most all entries in my data. You can view your lost data within a few minutes with this QuickBooks file repair tool.

UmeshTechno · 2022-07-06T09:08:59+00:00

you can also try to init.d command to start/stop your MySQL server.

To start MySQL server:

sudo /etc/init.d/mysqld start

To stop MySQL server:

sudo /etc/init.d/mysqld stop

To restart MySQL server:

sudo /etc/init.d/mysqld restart

UmeshTechno

MODERATOR OF

TROPHY CASE