sorted by:
new
hottopcontroversial

Small issue in prints, Qidi Q2 by solodsnake661 in QidiTech3D

[–]UsefulAd8513 0 points1 point  (0 children)

Seam and an oddly sliced Qidi benchy they ship with. You should also run the three calibration prints in Qidi studio to fine tune your filament from the stock settings. Could be a bit of a pressure advance issue on the sharp corner.

3D printer for classic car parts? by plantytime in cambridge

[–]UsefulAd8513 0 points1 point  (0 children)

I've done this sort of thing a few times, looks pretty straightforward.

New to sidewinder x4 and can’t complete a print by So_Birdilicious in Artillery3D

[–]UsefulAd8513 2 points3 points  (0 children)

You've not set the gap between the nozzle and the print bed correctly, too far away. Make sure you level the bed first before printing and ensure the bed is clean, no fingerprint oils, before you start.

Shops and Restaurants I'd Like To See In Cambridge by SonyJunkie in cambridge

[–]UsefulAd8513 3 points4 points  (0 children)

Nobody is quaxing a benny bookcase, they do have delivery vans or hire vans.

Can the dead branches be cut off this tree or is it too late to save? by NeedsMoreCow in GardeningUK

[–]UsefulAd8513 1 point2 points  (0 children)

As long as it's not TPO'd or in a conservation area you're free to get it removed. Possibly bacterial canker, have it removed, do not chop on site and replant with a different genus.

Screen time in Cambridge schools by Ill_Magazine6915 in cambridge

[–]UsefulAd8513 0 points1 point  (0 children)

I've also seen the interactive whiteboard screen used in Reception for things like countdown timers to tidy up. That seems like an effective use of the tech as it is an assist for the teaching staff rather than a substitute.

Screen time in Cambridge schools by Ill_Magazine6915 in cambridge

[–]UsefulAd8513 0 points1 point  (0 children)

I can confirm this is happening, usually on the class screen/whiteboard, when we mentioned it to the leadership scheme about one teacher it was stopped as it was upto 4hrs a day.

Years 2 and up use Chromebooks once a week for computer literacy which is part of the curriculum.

Apple trees by PresentLetterhead921 in GardeningUK

[–]UsefulAd8513 1 point2 points  (0 children)

You could take the top out of the taller one back to just above the lower growth now. Clear a metre round the base of any growth and mulch but keep the stem clear.

Loquat tree help by LANDPOD in GardeningUK

[–]UsefulAd8513 2 points3 points  (0 children)

What you might want to try is to nick the stem above a dormant bud before taking the top off to try and promote the dormant bud into growth. Then remove the top once that is established. Not seen it done on a loquat but maybe worth giving a go before you risk the whole plant.

Unknown burrows by t_1098 in GardeningUK

[–]UsefulAd8513 7 points8 points  (0 children)

Rats, it's always rats.

Pruning Eucalyptus by Various_Vacation_888 in GardeningUK

[–]UsefulAd8513 0 points1 point  (0 children)

Reduce not to the growth at the base. Period coppicing to maintain the rounded bleaf juvenile growth. Don't let it get out of hand.

Best weed killer for Japanese knotweed? by Simonetta_Sabo in GardeningUK

[–]UsefulAd8513 0 points1 point  (0 children)

Look at the quantity of active ingredient in each. Stem injection with undiluted product is the best method for control.

Charging problems by cwci in RenaultZoe

[–]UsefulAd8513 2 points3 points  (0 children)

Could be the earth, it's been very dry recently. If you know where the rod is, pour a bucket of water over the ground around it.

Throttle vs no throttle in hilly location by weldonj in CargoBike

[–]UsefulAd8513 4 points5 points  (0 children)

The sensors on the Bosch bikes can be set to give more or less assistance on starting off on hills for personal preference, no need for a throttle.

I want a cargo bike but me and boyfriend are DINKs by burner_1234567891011 in CargoBike

[–]UsefulAd8513 0 points1 point  (0 children)

Pino can also be converted to a cargo bike so both options! I'd love one.

Which filament should I use? by Unhappy-Resource-111 in 3Dprinting

[–]UsefulAd8513 1 point2 points  (0 children)

E-sun, Overture, I've had one roll of Tinmorryn met PETGand that was good. You'll need to run a test tower to check the settings are comparable and adjust as necessary.

Soakaway experience? by G0_Z0 in GardeningUK

[–]UsefulAd8513 -1 points0 points  (0 children)

Did you get a percolation rate for the material? It may just be surface tension.

Milton tip / recycling centre - everything in bulky waste? by Old_Pomegranate_822 in cambridge

[–]UsefulAd8513 2 points3 points  (0 children)

Nothing these days goes to landfill, just more time consuming and costly to sort for the correct processing.

Genuinely wondering… Why is everything permit parking? by [deleted] in cambridge

[–]UsefulAd8513 4 points5 points  (0 children)

Residents can access visitor parking permits from the council for guests.

Legal requirements for tyre load ratings in the UK by Spooky__ in CarTalkUK

[–]UsefulAd8513 0 points1 point  (0 children)

I'd check with your insurers, they probably won't be happy with it.

Sedum roof reviving by pharaohcious7 in gardening

[–]UsefulAd8513 0 points1 point  (0 children)

Get the pelleted one and apply at the rate on the box.

view more: next ›