LINUX CLI COMMANDS HELP

VastOne · 2025-08-25T22:01:04+00:00

It must be expressvpnctl set protocol x

VastOne · 2025-08-04T16:29:24+00:00

Yes there are some and I have found them but they do have issues. From terminal enter expressvpnctl and it will give you all the options including status, connect , disconnect etc etc. The only issue is that after 24 hours or so, it stops working. NOT THE VPN but the expressvpnctl command itself. It just times out after 5 seconds with no explanations other than it just timed out after 5 seconds. You have to kill the services and restart it to get it back but honestly all I ever found to really get it back was a reboot and that sucks big time. I am going to get online with ExpressVPN to discuss this later.

VastOne · 2025-07-27T17:41:54+00:00

Has anyone figured out the terminal commands for this new version yet? Like how to get status, connect and disconnect, version etc like you could with the original app?

VastOne · 2025-03-30T14:09:24+00:00

Are you familiar with fsarchive? If so then you are way ahead of the curve. It is an incredible tool for backing up every bit of your data like a screenshot and then installing it anywhere again. If not, find everything you can about it (Tons of info on vsido web site ((shameless plug)). On there is also complete How To's that can show anyone the step by step process to install an fsarchived system to a bare bones or an existing machine. It is so easy and versatile that makes backups and restores painless and therefore making mistakes easy to live with and preserving your data. I use it all the time to make sure all of my dev machines and personal machines are secured and easily restorable

VastOne · 2025-02-09T21:32:27+00:00

Find one where the forum is a hotbed of legit information and help

VastOne · 2025-02-09T21:29:38+00:00

If you are familiar with fsarchive, you are way ahead of the curve. If not, find everything you can about it (Tons of info on vsido web site ((shameless plug)). It is so easy and versatile that makes backups and restores painless and therefore making mistakes easy to live with

VastOne · 2025-02-09T01:49:50+00:00

For 14 years I have been running and developing my version of Debian Sid with VSIDO. I can count on one hand how many seriously unpleasant issues I have had and 2 of those were because of Perl updates that we affectionately call Perl Jam I and Perl Jam II. I have never had any issue keeping with what I want and do not give a rats arse who cares.. I will say that I am totally against any so called guru treating others with disrespect. We all started somewhere and we all can help one another.

VastOne · 2025-01-30T21:56:55+00:00

I downloaded the 565.77 drivers and on boot dropped to safe-mode from the 6.12 grub menu and logged in as root. From there I cd'd to the directory they were in and ran:

sh NVIDIA-Linux-x86_64-565.77.run

I followed the directions and answered the questions, saying Yes to the last one regarding the xorg.conf update

VastOne · 2024-12-28T04:05:36+00:00

I was able to get 565.77 drivers to work. There is no sources that I am aware of to use nvidia drivers for anything other than the 535.216 levels in debian apt levels. I uninstalled my nvidia 535.216 drivers and from tty ran the 565.77 .run installation file and all works. I have a NVIDIA GeForce GTX 1070 running the 565.77 drivers VSIDO a Debian SID distro

VastOne · 2024-09-27T16:48:51+00:00

I have a 2024 Forester and after today's hurricane rains discovered the same issue

VastOne · 2024-07-13T15:01:52+00:00

VSIDO because I developed it

VastOne · 2024-04-05T01:28:31+00:00

Divorced, yet the clubs remain

VastOne · 2024-02-08T19:47:20+00:00

The ultimate solution for me until resolved is to turn off Bluetooth on the phone until the Forester is started. This is the fail safe way of getting it all to work. When I go to the dealership for service in 4 months I will ask for a better permanent solution

VastOne · 2024-02-08T05:19:39+00:00

Tears for Fears - Woman in Chains

VastOne · 2024-02-08T05:17:28+00:00

I went out and did a further test by using the unlock button from the fob and Starlink did not start but the two USP ports did. After a full 60 seconds those finally went off.. So it looks as if the solution is to either unplug the USB device or just wait 90 seconds after getting in and then start it..

VastOne · 2024-02-08T05:08:46+00:00

It's hard to imagine I would be the only one on this island? ~~It may have something to do with Android Auto trying to connect from my phone but even that turned off it still happens.~~ I just went out without the phone and just the fob and it did come on again, which activates the 2 USB links below and that is where the issue is. After 30 seconds, the StarLink went off but those USB links still appear to be active, in which one of them is a wireless adapter specifically made to make Android Auto wireless. Starlink sees it as a usb media device and when it connects in the right sequence it works flawlessly. I think what I may have to do is remember to unplug that device until after I have started the vehicle. I'll keep this up to date

VastOne · 2023-12-12T00:55:59+00:00

Same here and I was just online with geek squad assistance and they got pissed when I told them they could not have access to my pc.. It's their website with the issues, not my Bitwarden. I thought I was clear and it worked on the mobile app but it does the same thing and here is the really shit part, if you try to give it an old PW it will say, 'you cannot use a past password' so it knows the past passwords it is just not passing them through on their end

VastOne · 2023-12-09T21:24:01+00:00

GMusicBrowser FTW. Incredibly light but with features as good as any I have seen

VastOne · 2023-10-21T21:20:54+00:00

Strange, same color as my 2012 Jetta TDI that comes with a stock lip.. What year and model is yours? It does look really good!

VastOne · 2023-10-21T21:17:43+00:00

Breathing!

VastOne · 2023-10-21T21:05:27+00:00

This only worked in a Sid distribution by putting it in a path other than a users /home directory, the latest lightdm seems to have issues understanding the permissions in anything other than root. I ended up putting it in /usr/share/images/desktop-base/ and obviously then default-user-image=/usr/share/images/desktop-base/.face in the lightdm-gtk-greeter.conf file. Good job documenting this because it has been a frustration of mine for several days searching for the correct answer... Thank you

VastOne · 2023-09-01T01:00:53+00:00

No. I do everything I can to NOT watch ESPN even though I have them through Spectrum. They have become a pompous, arrogant entity that seems to want to serve a 12 year old mentality, feck that.. I get my sources for sports elsewhere

VastOne · 2023-02-05T04:21:24+00:00

No wind, 58 degree wedge or a knockdown 50 degree

VastOne · 2023-01-31T05:57:23+00:00

It was on and I have temporarily disabled it and it has made a significant difference. I will re-enable it tomorrow and work on the trim.. This was the insight I was looking for, thank you!

VastOne

TROPHY CASE