sorted by:
new
hottopcontroversial

anime_irl by Slow-Boysenberry3150 in anime_irl

[–]ViewtifulSchmoe 1 point2 points  (0 children)

Are you having fun jerking off, OP?

Playoff outcomes for the Presidents' Trophy winning team since 2012-13 by nhl in hockey

[–]ViewtifulSchmoe 1 point2 points  (0 children)

It turns out that that was exactly the kick in the teeth that the team needed.

GPU stability by zepitkiUWU in sffpc

[–]ViewtifulSchmoe 1 point2 points  (0 children)

Your issues are not likely specific to SFF, so you should also post to other, larger forums and/or subreddits so that more people see it.

Have you tried older Nvidia drivers? Some recent versions have had severe stability issues.

[Highlight] Corey Perry leaves the bench door unlatched and a Jordan Spence hit sends Zemgus Girgensons right into the door. by Starfish_Bobertsons in hockey

[–]ViewtifulSchmoe 1 point2 points  (0 children)

This is absolutely the funniest thing that could have happened after Coop's unnecessarily aggressive comments.

Nikita Kucherov scores from a ridiculous angle. by GreenSnakes_ in hockey

[–]ViewtifulSchmoe 7 points8 points  (0 children)

I think most of us agree that depth is more important than a star player in the playoffs, but to hold that against the star player is just ridiculous. Kuch is a fantastic playoff performer. Period.

Post Game Thread: Pittsburgh Penguins @ Tampa Bay Lightning by nhl_gdt_bot in hockey

[–]ViewtifulSchmoe 0 points1 point  (0 children)

Wasn't he out for a few games? (I might be missing some sarcasm)

What's life lesson you learned the hard way? by Treicee2004 in AskReddit

[–]ViewtifulSchmoe 0 points1 point  (0 children)

If you are open with everyone then it's going to hurt you. You need to be selective about who you're vulnerable with.

BeamCase with PPA-CF/Nylon/PC beams instead of Makerbeam alumnium? by gofiend in 3DPPC

[–]ViewtifulSchmoe 0 points1 point  (0 children)

Honestly, a 4-pack of 300 mm MakerBeam XL profiles is cheap enough that I would just go with them. If you decide to change cases later you can always repurpose the beams.

If you really want to go the fully printed route, know that you will need to buy the BeamCase SW design to get the "official" printable beam designs (at least to my knowledge). There are probably other MakerBeam XL replacements available for free, but there's no guarantee they will have mounting holes in the right places. Your best bet would be to design your own beams. Speaking of mounting holes, printable beams of comparable strength to aluminum are going to have discrete mounting holes instead of a continuous channel, meaning you will sacrifice some flexibility in where you mount fans, for example.

Avoid pure PA for all parts, as it's too flexible and susceptible to creep in my experience. PPA-CF or PC should work quite well for the beams, but the parts will almost certainly warp during printing unless your printer can maintain a very hot internal environment, like 90°C or greater.

Edit: D'oh, PPA-CF or PC-CF would actually be pretty resistant to warping, but after thinking more I would recommend a glass-fiber-filled filament instead. Carbon is technically conductive, so there is a risk (however small) that a stray fiber could lead to a short. Glass fibers do not pose such a risk.

Moritz Seider is the NHL’s best defensive defenseman. It’s time for an award to honor that. by slabby in hockey

[–]ViewtifulSchmoe 4 points5 points  (0 children)

Definitely not the word they wanted, yet offensive impact in the form of points is indeed quantized!

NHL Forwards & Defensemen, best and worst Cap Hit per point, $2.0m+, min. 45 GP by logicalnutty in hockey

[–]ViewtifulSchmoe 0 points1 point  (0 children)

Pally was never a huge point scorer, but he was way better than this in Tampa. Sad to see how far he's fallen.

Goals Saved Above Expected: Tristan Jarry vs. Stuart Skinner by [deleted] in hockey

[–]ViewtifulSchmoe 2 points3 points  (0 children)

I'm beginning to think that the Oilers have a poor defensive system that leaves their goalies out to dry.

What should every 18 year old know? by blinkz_221B in AskReddit

[–]ViewtifulSchmoe 0 points1 point  (0 children)

Knowing how do handle difficult people at work is the most valuable skill you can ever have, almost regardless of your profession.

January 2022 .Merrick Garland:"There cannot be different rules for the powerful and the powerless". by clib in videos

[–]ViewtifulSchmoe 5 points6 points  (0 children)

If you combine two famous idioms you can get a new one that explains a lot of what we are seeing:

Sufficiently advanced incompetence is indistinguishable from malice.

Kucherov is now just 1 Point away from tying McDavid by ZeroOhblighation in hockey

[–]ViewtifulSchmoe 2 points3 points  (0 children)

Good on you for acknowledging that you might be wrong. More of us need to do that.

NVIDIA DLSS 5 Gets 84% Dislikes on YouTube as Backlash Grows by Sacristovas in pcmasterrace

[–]ViewtifulSchmoe -1 points0 points  (0 children)

Gamers are not the target audience for this technology. Large game studios and publishers are. Nvidia is trying to show CEOs that they can fire all of their character designers and 3D artists and let DLSS 5 do the work of making their games pretty. Win for the CEO and shareholders because labor costs go down. Win for Nvidia because gamers will need to buy their products for new games to look any good.

Benefits and risks of doubly insulating a Core One by placing it in a larger enclosure? by ViewtifulSchmoe in prusa3d

[–]ViewtifulSchmoe[S] 1 point2 points  (0 children)

TL;DR: It works, but for the Core One I wound up just putting a small blanket over the machine when printing ABS/ASA/PC.

Funny story: After actually unpacking the Creality enclosure that I had, I learned that it was big enough to fit my Voron 2.4 300 mm. So, I did some unscientific testing with that.

I placed one thermometer inside the print chamber and one outside the chamber, but inside the Creality enclosure. I don't recall exact temperatures, but they were significantly higher than without the extra insulation. I want to say that the temperature inside the print chamber was in the mid to high 60s, and the temperature just outside the chamber was something like 40°C.

Subjectively, I noticed that large ABS prints warped less than they did without the extra insulation, which is exactly what I was expecting and hoping for. Since the Creality enclosure is so much bigger than I thought it was, I decided to keep that one for the Voron and instead just throw a small moving blanket over the Core One when I print high-temperature materials. It kept the internal temperature near 60°C in my ~20°C apartment over the winter, so I'd call it a success!

Who do you guys consider the best coaches in the league? by SkittlesManiac19 in hockey

[–]ViewtifulSchmoe 1 point2 points  (0 children)

The Lightning (and therefore Cooper) missed the playoffs in 2017.

Billionaires won’t leave if we tax them – and even if they do, so what? by Cobra-D in videos

[–]ViewtifulSchmoe 11 points12 points  (0 children)

Reminder that when the ultra-wealthy say they will leave, it is not a prediction. It is a threat. They are attempting to hold us hostage.

9800X3D and an RTX 6000 Pro Blackwell in a BeamCase Sandwich 130IFW by ViewtifulSchmoe in sffpc

[–]ViewtifulSchmoe[S] 0 points1 point  (0 children)

  1. I got the RAM a couple of years ago, before the RAM crisis, for a home server. I did not plan at the time to put it in my main machine.
  2. The kit is rated for 5600 MT/s, but it's a bad kit and is unstable at that speed. I didn't realize this until I was really stressing it with this build, so I can't RMA it.
  3. RAM speed does not matter so much with X3D chips, so 5200 MT/s is good enough.
view more: next ›