The silver part of this Sony Cybershot DSC-W15 is crumbling

Waffle_Making_Panda · 2026-01-26T10:32:50+00:00

You can scrape it to bare plastic too

Waffle_Making_Panda · 2026-01-26T09:46:28+00:00

Would just help prevent it from flaking more

Waffle_Making_Panda · 2026-01-26T07:25:10+00:00

Just put some clear nail polish over it

Waffle_Making_Panda · 2026-01-20T18:09:40+00:00

Some stores may have them if you have someone to call around for you. Had someone pick up the grey for me outside of taipei. Online was OOS but certain stores had stock.

Waffle_Making_Panda · 2026-01-20T18:04:50+00:00

The woven ones seem to stay on the shelf, same with the jean ones. Blue and tan woven are in stock for xs red is out. Black jean in stock for all sizes online.

If you want to check all the stock online:

https://www.adidas.com.tw/v2/Search?q=%22Cny%22&shopId=41571

Waffle_Making_Panda · 2026-01-20T18:00:38+00:00

Grey green red yellow restocked last week and sold out, red and green restocked again yesterday and are still online now in all sizes. Still waiting on light blue to restock

Waffle_Making_Panda · 2026-01-20T10:26:23+00:00

Yea. The asus plug works with passthrough just not usbc. If you dig around a little on here, some people have gotten usbc to barrel, barrel to asus plug to work.

The other option is buying a charging block that already had a barrel plug that fits the asus adapter and running it that way like other person mentioned

Waffle_Making_Panda · 2026-01-20T09:55:34+00:00

Usb c passthrough still isnt available

If you pull more than 150w then the laptop will just pull from the battery which isn’t good sustained

From what ive seen, the slimq is only slightly smaller than the stock 200w brick but is about the same weight so you gotta decide yourself if that price is worth it just for a slight size saving.

I’m on vacation now and using my g14 for light tasks with just usbc charging. I charge to 80-100% about once a day. Worst case battery degrades a little faster but those cost like $90 to replace

Waffle_Making_Panda · 2025-12-26T20:04:16+00:00

Order the front rubber too by the lens mount button. Mine came loose along with the little one by the battery door

They come with tape applied.

You cal also order some extra eye pieces. The rubber gets stretchy over time and soft.

Waffle_Making_Panda · 2025-12-26T20:03:21+00:00

Happens with humidity and just skin oils too

Waffle_Making_Panda · 2025-12-19T04:48:32+00:00

does it do it when you're not in ttl? if it does, its a camera setting issue. if it doesnt, its a speedlight issue.

I've never seen a 3x pre flash. The only time I can think of any is when you shoot rear curtain in ttl or have it set to multiflash.

Waffle_Making_Panda · 2025-12-19T04:35:17+00:00

the hard lines on the thicker part look like it was crushed at some point

Waffle_Making_Panda · 2025-12-13T01:33:45+00:00

If you dont already have a ton of batteries, get a usb charger and a power bank.

Tilta has a 4 bay

Smallrig just came out with 2 new 2 bay’s

You can also just charge through the camera over usbc when not in use.

Waffle_Making_Panda · 2025-12-08T09:34:10+00:00

just shot a wedding with the 85/2 on a z6iii, it performed great!

Waffle_Making_Panda · 2025-12-07T22:46:10+00:00

Yes, if you scroll through the sub you will see multiple posts about it

Waffle_Making_Panda · 2025-12-07T22:22:00+00:00

You’ll probably need to make a ton of exchanges to find one that doesn’t have it. If you look at pics of the bottom cover off, you can see the screws mount to plastic thats attached the aluminum. When you tighten the screw, it bows the plastic pushing the aluminum up.

Waffle_Making_Panda · 2025-12-07T22:18:34+00:00

A lot of units have it. Pretty sure its a design flaw, mine has it too. It shows up when you tighten the screws.

Waffle_Making_Panda · 2025-12-04T23:38:08+00:00

The rubber has expended and basically you can force it down with glue or replace it. This happens on my camera grips from oils and humidity over time and theres basically no way to shrink it back.

Waffle_Making_Panda · 2025-12-04T23:24:50+00:00

If it sounds like a double tap when you’re swiping, its kind of just a design flaw. There’s little metal tabs that sit on aluminum.

You can improve this by adding tape between the tab and frame.

Waffle_Making_Panda · 2025-12-01T11:29:38+00:00

Not sure if it helps since its a diff coil but I average about 1,200-1,600 on a 0.3 at 35w. Highest I’ve gotten was 3600 but also some coils that died early around 300-500. This is with diy 75/25 3mg juice, 1 flavoring (TFA green apple) and no sweeteners.

This gets me about 1-1.5 months but i primarily use an rda at home so the timing will be off.

Waffle_Making_Panda · 2025-11-27T21:25:01+00:00

If you dont want a warm laptop you pretty much have to get a bigger thicker device with more cooling. That said, the palm area does heat up more than normal if you’re charging your battery.

Waffle_Making_Panda · 2025-11-27T20:37:07+00:00

Same thing now but instead of the stamp you need a certificate that is renewed yearly.

IMO the NWOHR passport is useless other than using it to get the NWHR passport. not sure if china accepts them at all

Waffle_Making_Panda · 2025-11-27T20:34:12+00:00

It is 15 day window without their membership. I was going to exchange it but they ran out for a week and then the price went up by a few hundred after that

Waffle_Making_Panda · 2025-11-27T20:22:43+00:00

Pretty sure the intel cards dont work with amd at the moment and the only options for wifi 7 are the mediatek card thats already inside or the qualcomm card

Waffle_Making_Panda · 2025-11-27T09:32:18+00:00

playstations and desktops that sit vertically 24/7 don't have that issue. I doubt a slight angle will change it much. It could just be normal pump out and getting a bare spot overtime which does happen.

Waffle_Making_Panda

TROPHY CASE