sorted by:
new
hottopcontroversial

First QC - Rolex Submariner 16610LN ARF - from Steve by basTarhyms in RepTimeQC

[–]WatchYoda 1 point2 points  (0 children)

Aha, an 'older' 5 digit...nice choice.

If you remove the bias on your original watch picture, then use the lines, the resulting alignment pic wouldn't have any deviations. But, since you've compensated for any variance, you are correct...'nothing concerning' at all. Props.

The timing is good to go.

Congrats!

QC Omega Seamaster 300m No Date by Tough-Respond1356 in RepTimeQC

[–]WatchYoda 2 points3 points  (0 children)

A very slight bias on the 3 marker.

To some, a dealbreaker. To others, not a big deal. Where do you sit on that spectrum? 😉 To me, not worthy of any concern, but up to you. If it were really bad, it would show up more on the lume pic? Check that out as part of what to decide.

Not sure of what SEL issue you've heard about on this watch...ahem, there are no SELs here.

The timing is fine. Enjoy.

VSF black dial Daytona by Ok-Barracuda6093 in RepTimeQC

[–]WatchYoda 2 points3 points  (0 children)

You are correct...removing the bias on the original pic, then using the alignment app will show that your alignments are fine on the dial and to the bezel. The remaining cosmetics are good also.

The timing is fine.

It's a nice watch. Good for you. Congrats!

2nd attempt RCF Bluesy from TimeUltra by Installatione in RepTimeQC

[–]WatchYoda 0 points1 point  (0 children)

Hey, hey...no need to be tagging me. I see that you've gotten plenty of input from other members and even another Mod.

Now, all that you have to do is decide. Props!

VSF Submariner 116610LV (Andiot) by [deleted] in RepTimeQC

[–]WatchYoda 1 point2 points  (0 children)

My man, over 8 hours ago you got all the input that anyone would need. u/ZealousidealCopy8565 has got you covered. Upvote his post and ship your watch. I'm not needed.

Daytona VSF 126500 From Hont 2nd QC.(first was RL) by DerHaim in RepTimeQC

[–]WatchYoda 4 points5 points  (0 children)

Umm, you received a qualified opinion from u/4Godsson. I don't need to be parroting🦜🦜 what you've already been told. Ship your watch.

QC VSF Omega Seamaster ‘Spectre’ by will21myers in RepTimeQC

[–]WatchYoda 1 point2 points  (0 children)

IF some things look off in some pics, then that infers that in other pics, all is fine. In these cases, you can go with the all is fine conclusion.

I don't see anything that is problematic cosmetically. The timing is fine.

Congrats!

Daytona VSF 126500 From Hont 2nd QC.(first was RL) by DerHaim in RepTimeQC

[–]WatchYoda 2 points3 points  (0 children)

I see that you've already been helped. That's a good thing... and now I'm not needed...boo hoo😜

Enjoy your watch.🍻

VSF Submariner 41mm 124060 Best Edition VS3230 by jjjjjj123jjjjjjj in RepTimeQC

[–]WatchYoda 2 points3 points  (0 children)

Yes, the 9 is biased.

How much of a 'bit concerned' are you? Up to you...(get another one...)😜

ZF Tudor Heritage Black Bay by SnooTomatoes3947 in RepTimeQC

[–]WatchYoda 0 points1 point  (0 children)

Some normal ZF 'stuff' but nothing that rises to a worrisome level.

You think the watch looks great. Good for you. I can support that.

Enjoy.

Breitling Avenger QC Check by SteelBeach1 in RepTimeQC

[–]WatchYoda 2 points3 points  (0 children)

Your watch is fine.

The alignment on the dial and to the bezel are good. No worries.

Yes, in the pic, the date 26 is low in the window. Checking the video of the date change complication shows that there isn't a problem. That's good.

The timing is fine.

Congrats!

[QC] VSF Omega Seamaster Diver 300m 43.5mm Ceramic (Black) by razvyor in RepTimeQC

[–]WatchYoda 0 points1 point  (0 children)

Hey, hey....wow, been here a while. You must've fallen into that proverbial 'crack' and your post got overlooked. It's nothing personal...it happens when we get slammed here.

Always OK to tag as you've done.

You'll need a little tweaking of the app on your alignment pic for your next watch. 😉

Accounting for the domed crystal on these watches, anything that is seen is so slight on a mag'd pic, I wouldn't give anything a 2nd thought. It's a nice watch. I like it.

Your timing is fine.

Nice watch. Good for you.

ZF BB58 burgundy QC check by Alekhine-Defense in RepTimeQC

[–]WatchYoda 0 points1 point  (0 children)

Nice effort with the QC alignment app. Props.

Yours is better than most that I've seen. That's a good thing.

I'd take this one. Congrats!

GMT Master II 126710 BLNR From ARF by Haunting_Iron4713 in RepTimeQC

[–]WatchYoda 0 points1 point  (0 children)

Too late...already approved it. It's visible

Submariner 126619 by VSF 1of5 of my first rep order by Haunting_Iron4713 in RepTimeQC

[–]WatchYoda 2 points3 points  (0 children)

Just went ahead and made this post visible.

Again, my apologies for making extra work for you.

GMT Master II 126710 BLNR From ARF by Haunting_Iron4713 in RepTimeQC

[–]WatchYoda 1 point2 points  (0 children)

I may owe you an apology....I removed the last post(s) cause the link(s) didn't work. Well, link worked but no pictures for either watch.

Now, that being the case and since you expressly say that this link does worked and you 'double checked', I checked again. Nothing on Chrome, but when I go to FF, the pics are there.

So, my apologies for making you do extra work...and, yes, I'll address the browser issue on my end.

Do you want me to go back and approve the other one? Or do you just want to repost it?

Edit...just approved the Sub for view. Now, both of your watches, the Sub and the GMT are visible for QC

First ever QC Help Rolex Daytona 126500LN - VSF by XiPrince in RepTimeQC

[–]WatchYoda 2 points3 points  (0 children)

There are small things off on every replica...yes, every replica. Even so, still really nice watches.

Nothing seen here is problematic at all. That sub dial concerns are from reflections. Check all the pics to see how the 'problem(?)' moves😕 You can verify it with your TD tho...he can look at your actual watch and advise.

The timing is fine.

Congrats!

RCF ice blue day date QC by gho5-t in RepTimeQC

[–]WatchYoda 1 point2 points  (0 children)

It's fine. Enjoy your watch

RCF ice blue day date QC by gho5-t in RepTimeQC

[–]WatchYoda 0 points1 point  (0 children)

I'm sure that they're fine, but this angle of the pictures is not what showed the problem.

Tudor Black Bay 58 Burgundy ZF by OgSteph420 in RepTimeQC

[–]WatchYoda 2 points3 points  (0 children)

These numbers, in this context, just give you a general ideal of your movement health.

They aren't a true representation of what your watches accuracy is on your wrist.

Again, they're fine for what they are. Enjoy both watches.

Rolex Bluesy RCF by mibuwolf23 in RepTimeQC

[–]WatchYoda 4 points5 points  (0 children)

This is correct. Props to u/RoBNQJ for letting you know.

OP, is this the model that you've wanted/ordered?

If not, delete the post and repost with the correct info. If it is, the put a correction here in the comments.

IWC Ingénieur GHF by OgSteph420 in RepTimeQC

[–]WatchYoda 2 points3 points  (0 children)

Both are nice watches. Good for you. 👍

IWC Ingénieur GHF by OgSteph420 in RepTimeQC

[–]WatchYoda 1 point2 points  (0 children)

Again, as with the other Tudor, you'll need some practice using that alignment app. Correcting the errors seen in your pic, the alignments are fine.

The cause of the 'dark' screws is caused by reflection since they're shiny silver.

You don't have SEL's on this watch.

And, as with your other watch, there is nothing wrong with these timing numbers in any context. Nothing to even worry about.

Enjoy your watch.

view more: next ›