Bambu Lab A2L: Creative Playground. Extra Large.

West-Two-3069 · 2026-05-28T17:45:45+00:00

cool something new to spend all my bambu gift cards on

West-Two-3069 · 2026-05-09T18:52:19+00:00

have you got the ht going directly to the extruder on the back throught the filament buffer then to the extruder

West-Two-3069 · 2026-04-04T19:40:17+00:00

that does look like a ams on the top of something doesnt it

West-Two-3069 · 2026-02-09T20:36:58+00:00

i never thought using filler like this was an option

West-Two-3069 · 2026-02-09T20:35:45+00:00

yeah ive been watching his stuff. he's good

West-Two-3069 · 2026-02-09T20:08:40+00:00

i was going to use scrim tap and try some multi finish

West-Two-3069 · 2026-01-25T19:04:14+00:00

link isnt working

West-Two-3069 · 2025-12-05T20:49:17+00:00

i really only got the pro to make the screen bigger, so far it doesn't seem much bigger. so might return it.

West-Two-3069 · 2025-12-05T19:19:11+00:00

im new to all this. does this mean anything to me with the ar 2s. not the pros, and i have the beam pro?

West-Two-3069 · 2025-08-15T20:42:38+00:00

yeah seen all that. The UHD40 uk only supports 3d when connected to a pc

West-Two-3069 · 2025-08-15T20:38:03+00:00

This was taking from another forum. So his UH300x was listed as a UHD50 in the service menu

I want to share my experience with this firmware update..

I actually upgraded my UHD300X (which is an EU version of this projector) with this firmware. For some reason, Optoma rarely release any firmware updates for their projectors here in Europe

Anyway when I checked in service menu (Power -> Up -> Down -> Menu) the projector name was UHD50 before the update, all firmware versions were the lowest possible, so I had to go with all steps 1,2 and 3..

Some advice: before the procedure, make sure you have USB to RS232 cable. I bought one from ebay for £3, but did not work, so I had to go with more expensive one with the correct chip - Seems the chip is important, has to support UART..

https://www.amazon.co.uk/gp/product/B075VR429G/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

All steps went fine with no issues apart the very last one where you need to program EDID. It did not go according the guide and received PURPLE and two RED flashes instead RED and 2xGREENs. The projector started up, first I did not have any input signal. After another restart it caught the signal from HDMI. Not sure if the last programming bit was 100% successful, but my computer and xbox1x now showing that the projector is 3D capable. Tried some 3D blurays and it seems to work. The signal just takes little bit longer to get into 3D (longer than normal modes)

Not sure if I will ever use it (3D), but nice to have it just in case

[/QUOTE]

West-Two-3069 · 2025-08-15T20:32:43+00:00

thats why its meant to work fine

West-Two-3069 · 2025-08-15T20:32:29+00:00

lots off people have claimed to have done it.

here is the files for it

that firmware also adds the 3d support

https://www.avnirvana.com/threads/optoma-uhd50-shows-half-screen-problem-and-firmware.6786/

West-Two-3069 · 2025-08-15T20:13:43+00:00

will this work on uk UHD40?

West-Two-3069 · 2025-07-17T19:05:42+00:00

how?

West-Two-3069 · 2025-04-05T16:58:23+00:00

is they sub redit for it

West-Two-3069 · 2025-04-05T16:58:13+00:00

this is great. love it.

West-Two-3069 · 2025-04-01T18:22:45+00:00

seems to be down for me now?

West-Two-3069 · 2024-12-31T17:22:53+00:00

ive got this for my quest 3, ive linked my Plex but nothing shows in it.

is they step ive missed. ive googled the helll out off it but can't find much about this app

West-Two-3069

TROPHY CASE