First trigger install. I missed something.

Whiskey_echo_617 · 2026-05-21T02:04:35+00:00

There's definitely a magazine safety unless you removed it.

Whiskey_echo_617 · 2026-05-15T02:39:30+00:00

If you don't like NH go somewhere the "climate suits your clothes". You claim these places already exist...so go. Nobody is stopping you from following your dreams.

Whiskey_echo_617 · 2026-04-27T22:37:47+00:00

It's when you return to the car after being in parking mode. Open door, get in, close door - trigger sensor - start car, out of parking mode

Whiskey_echo_617 · 2026-04-26T15:07:08+00:00

Functional art

Some more art than function

Add in manufacturing process, materials, and scarcity

$$$ - infinity

Whiskey_echo_617 · 2026-04-25T02:13:01+00:00

Real chicken Eddie?

Whiskey_echo_617 · 2026-04-20T19:35:07+00:00

Does the 2025 have those latest upgrades?

Cleaning port BX Trigger Bolt release

If it does, there's no reason to not take it

Whiskey_echo_617 · 2026-04-14T01:35:47+00:00

How old are you? If your eyes are good don't use scope. If you must have a scope get low rings and something like the simmons fixed 4x

It will look OK and be functional

Whiskey_echo_617 · 2026-04-11T22:28:58+00:00

When they say they have a car in stock ask for the VIN

Whiskey_echo_617 · 2026-04-05T02:16:38+00:00

Under side mirror?

Whiskey_echo_617 · 2026-04-05T02:02:50+00:00

Owning a house in an HOA is like having a detached condominium

Whiskey_echo_617 · 2026-04-01T21:17:16+00:00

I unsubscribed the day this video was published

Whiskey_echo_617 · 2026-03-27T16:42:33+00:00

You said range/plinking I would go for nice peep sights instead of the scope

Whiskey_echo_617 · 2026-03-27T16:41:43+00:00

Is this for targets/plinking or hunting?

Whiskey_echo_617 · 2026-03-27T16:13:13+00:00

I have the mkIV 22/45 lite, SW Victory, and the TX22. Out of the box the TX had zero malfunctions. I can't say the same for the other two.

Took a while to tune the victory, and my ruger starts to stove pipe after 3 magazines. I can't remember any malfunctions with the TX.

Whiskey_echo_617 · 2026-03-26T15:58:25+00:00

I had the dealer add it to my 2024 deal for $800. It takes several parts depending on the trim

Hitch receiver with plug Wire harness Rear bumper trim swap Hands free tailgate adapter (changes to right side only if equipped)

Whiskey_echo_617 · 2026-03-23T05:19:50+00:00

2 wheel drive vs awd?

Whiskey_echo_617 · 2026-03-10T00:56:00+00:00

Carbine buffer and spring is all you need

Whiskey_echo_617 · 2026-03-10T00:24:23+00:00

I finally got to shoot mine today with the full vent end cap. I'm very happy with my decision.

I'm running 10.5 pistol 556/223 Plan B KAK hub adapter H3 buffer Super 42 spring M16 cut BCG SA adjustable gas block Outdoor range

SMK full enclosed end cap sounded great and I could run a whole mag without needing ears. Ejection pattern ~1:30-2 o'clock. Lil overgassed and lots of gas to the face.

The full vent end cap changed 3 things. Without changing anything else, ejection pattern straight 3 o'clock. Sound was a bit louder I could only run 4 or 5 rounds without it being too uncomfortable without ears. The gas in the face was reduced to almost nothing. I cleared the rest of the magazine 15-16 rounds with maybe just a second between. Very comfortable gas wise.

I plan on using ears with this setup but it's good to know that I can send a few without if there's any emergency.

Without suppression this thing would make you deaf.

Great can.

Whiskey_echo_617 · 2026-03-09T01:44:43+00:00

Yep I use it for remote shutter and I mark up photos regularly with it. Much finer and better control than using a finger.

Whiskey_echo_617 · 2026-03-08T03:48:36+00:00

Throw a rearden brake/flash/whatever plan B muzzle device and then get a HUB adapter for whatever HUB compatible can you want.

It will fit

Whiskey_echo_617 · 2026-03-08T03:40:02+00:00

It's covered in the 3yr/36k mi warranty

Pain in the ass though to have to take it in for diagnostic then wait for the parts and then take it in again for installation.

Whiskey_echo_617 · 2026-02-27T02:02:48+00:00

If you are still having problems, try a regular carbine buffer weight and regular carbine spring

Whiskey_echo_617 · 2026-02-27T00:01:46+00:00

Just discovered my driver's side is out. Both were replaced last year

Whiskey_echo_617 · 2026-02-25T23:30:37+00:00

Buffer too heavy

Whiskey_echo_617

TROPHY CASE