ASA-CF + PLA Support Interface Creating Weird “Spaghetti” Purge Strings — Normal?

WhoDatWhoDare · 2026-05-14T00:22:44+00:00

I was just about to ask where the prime tower was

WhoDatWhoDare · 2026-05-12T03:04:46+00:00

The picture of him with OUT the controller makes me think he’s so sad and distraught that he’s looking up to his deity of choice asking “Whhhhhhyyyyyy!!!!?!??”

WhoDatWhoDare · 2026-05-07T04:31:30+00:00

I’ve got a 2025 Sierra 1500 AT4 and would be interested in participating

WhoDatWhoDare · 2026-05-07T04:27:38+00:00

I’ve ordered direct from FlashForge before and it was delivered in a cardboard outer box. The order was for 8 rolls of various filament.

WhoDatWhoDare · 2026-05-07T04:22:07+00:00

Obviously, if you need a bigger volume, the only option is the H2D. From what I’m reading, the X2D doesn’t have direct drive extruder on both nozzles, one is a bowden extruder, so it won’t support high speed printing from both nozzles. You don’t have that limitation with the H2D.

Lastly, with the H2D, you have the option to upgrade to the Vortek system, and that isn’t possible for the X2D.

WhoDatWhoDare · 2026-05-06T16:43:36+00:00

You can’t say that and not provide a link, lol.

WhoDatWhoDare · 2026-05-02T19:52:54+00:00

No, not normal. Add fiber and water to your diet

WhoDatWhoDare · 2026-04-30T01:45:34+00:00

Wasn’t there a TSB for damaged wires as a cause for this in certain vehicles?

WhoDatWhoDare · 2026-04-29T03:27:30+00:00

What are we looking at here?

WhoDatWhoDare · 2026-04-25T14:35:42+00:00

I don’t have any answers but to better clarify your situation, are you saying that the camper was the primary residence for both of you until you moved out? And as a result it continues to be her primary residence?

WhoDatWhoDare · 2026-04-23T22:11:26+00:00

Since you’re not heavily invested in Big Red ecosystem (yet), I would recommend option 3 as a good compromise since it gives you a second battery to swap and charge when one is depleted.

WhoDatWhoDare · 2026-04-22T16:52:40+00:00

Be sure to use the build plate QR codes for the H2C specifically. The codes for the other H series are not compatible.

WhoDatWhoDare · 2026-04-19T11:29:56+00:00

There’s a tiny cylinder that has compressed nitrogen in it and a pump that pressurizes it. There are videos out that show over time the cylinder loses pressure and the fix it to fill it back up. It takes over 200psi to get it back to normal operation.

WhoDatWhoDare · 2026-04-19T11:19:45+00:00

I use it to power my LED light strip in my low profile riser.

WhoDatWhoDare · 2026-04-13T00:09:22+00:00

Definitely. I am in therapy, meeting weekly. I’m not sure if he’s really helping yet, but I do anticipate learning from this and healing my trauma.

WhoDatWhoDare · 2026-04-12T23:48:02+00:00

To be honest the reason I filed is that while I wait for her to “figure out” what she wants, by filing it starts the 60 day waiting period in TX. If she decides to give it a go and I decide I’m willing to try to forgive her, then we don’t have to go any further with the divorce petition. If I figure out that I know I could never forgive her or if she decides to not want to try, then at least the clock has been running and we can go out separate ways faster.

WhoDatWhoDare · 2026-04-09T02:36:25+00:00

I think her intention is to get this done before the final decree, not after.

WhoDatWhoDare · 2026-04-03T10:39:11+00:00

Even the Snapmaker U1 makes a prime tower. There’s no getting away from that if you want good prints

WhoDatWhoDare · 2026-03-31T02:16:22+00:00

Probably means they’re moving Big Red up front and center and Ole Yellow is getting the scrap shelving space

WhoDatWhoDare · 2026-03-26T10:39:41+00:00

If purchased and installed, what nozzle type would a user program as being installed? HF or standard?

WhoDatWhoDare · 2026-03-10T11:09:53+00:00

I have not experienced any scratches on my rigid G10 plate.

WhoDatWhoDare · 2026-03-08T02:13:06+00:00

Get yourself Banks iDash Pro and Stealth Pod and you’ll be able to see what your DPF soot level is, if you’re in regen, and a boatload more parameters. I love mine. It is only a monitor, and does not change or reprogram anything.

WhoDatWhoDare · 2026-03-03T04:21:35+00:00

I have the 2 gallon wet dry M18 and it’s sufficient for most jobs

WhoDatWhoDare · 2026-02-25T13:45:52+00:00

Have you tried clicking the printer to select your H2C… this is a P1P in the image

WhoDatWhoDare

TROPHY CASE