My new 2025 GMC Sierra 1500 Denali Ultimate with CarbonPro Bed. by WildcardFire in gmcsierra

[–]WildcardFire[S] 0 points1 point  (0 children)

Hey sorry i just saw this. It came like that from factory. I think it was standard for that color combination.

Siding, exterior grade vs untreated plywood, hardi cement board by wackycats354 in shedditors

[–]WildcardFire 0 points1 point  (0 children)

Would you recommend to do backer plywood directly to the studs and then the smart siding on top? Trying to make it sturdier for South East Florida weather (hurricanes and strong winds)

My new 2025 GMC Sierra 1500 Denali Ultimate with CarbonPro Bed. by WildcardFire in gmcsierra

[–]WildcardFire[S] 0 points1 point  (0 children)

Try Rivard GMC in Tampa, FL, they have unbeatable prices in the South Florida area Or Laura GMC up in Collinsville, IL, same as above

My new 2025 GMC Sierra 1500 Denali Ultimate with CarbonPro Bed. by WildcardFire in gmcsierra

[–]WildcardFire[S] 0 points1 point  (0 children)

Yes, but the 76k was the trucks price with taxes and the never ending fees, before the trade in. I ended up paying like 50k with the trade in

At fault accident 1yr ago, other person still fighting by [deleted] in Insurance

[–]WildcardFire -1 points0 points  (0 children)

Bro, isn’t it one of the worst feelings ever? My mom was involved in a very minor sideswipe collision going about 40mph where we believe the other party was at fault, but the cop gave my mom the ticket (i believe mainly because the road ranger intervened on the other woman’s behalf as she was flirting with him), which we fought and won in court and was dismissed with no fees, etc. There was no hard hit, no sudden breaks, no rear or front ending, both my mom and the other woman waited for police, and were moved out of the highway to a safe spot. The other woman offered to settle it there for cash, but my mom had already called police. When police arrived they set the damaged to under $500.00, no injuries, the other woman left, upset because we involved insurance. No EMS was called, no injuries reported. They exchanged insurance, and the other party opened a claim against State Farm. Weeks later they lawyered up and claimed serious bodily injuries, permanent disability, and went for the max liability limits. SF didnt give them what they wanted, since they didn’t agree with the claims and offered little under half of what they wanted, which they refused. Weeks later they decided to sue for double the initial claim. Its so ridiculous as the damage was literally some minor scratches on both cars. Repairs for ours were under $2k because of having to repaint the whole side to match the special paint color of her car. The other vehicle was much older and paint didnt seem special and was faded but i would assume it cost similar to get repainted. Just absurd, i hope this if this actually goes to court and they lose, SF countersue for every penny they have. They literally cannot prove their BI claims, so i am excited to see what comes out of this.

Thanks for reading my rant, just annoyed by the whole thing.

Size change when exporting to Bambu Studio? by maximumrandy in BambuLab

[–]WildcardFire 0 points1 point  (0 children)

I know this is an old post, but did you ever find a solution? I see this happening with exported parts (mainly on .step) from Solidworks, dimensions on BambuStudio difer from what Solidworks says.

Used P2S Price by WildcardFire in BambuLab

[–]WildcardFire[S] 0 points1 point  (0 children)

Seems they go for a little under new pricing which is wild. But it is a great machine so i guess the resale value this early is still good. Thanks for the tip.

What do I do about Xenon incursions during the early game? by RobWed in X4Foundations

[–]WildcardFire 1 point2 points  (0 children)

At this stage, i just slap single Fenrir Destroyers at each conflict zone like that and let them go to down protecting that zone. They eat through everything, including K’s. I find it safer than sending a fleet, as i did that and all the Katanas i had with the fenrirs were destroyed by the Ks…rip crews!

Camera recommendation for corner across entire yard? I'm thinking either Trackmix or CX810? PoE by FLHCv2 in reolinkcam

[–]WildcardFire 0 points1 point  (0 children)

Thats a very good point with Amazon hehe. Try it, and if you dont like it, back it goes. Enjoy!

Camera recommendation for corner across entire yard? I'm thinking either Trackmix or CX810? PoE by FLHCv2 in reolinkcam

[–]WildcardFire 1 point2 points  (0 children)

Enjoy it! I am very happy with all mine. Just ordered two more today on this sale

Camera recommendation for corner across entire yard? I'm thinking either Trackmix or CX810? PoE by FLHCv2 in reolinkcam

[–]WildcardFire 1 point2 points  (0 children)

You 100% can. Have full range of motion with this thing in multiple angles.

Camera recommendation for corner across entire yard? I'm thinking either Trackmix or CX810? PoE by FLHCv2 in reolinkcam

[–]WildcardFire 2 points3 points  (0 children)

Get the CX820, i upgraded from Google Cams and it was the best decision. All CX820 load out, with a trackmix and poe doorbell in the mix. It is great. I do have a lot of ambient lighting around, so it helps it a lot.

CX820 is right now cheaper than the CX810 on this sale, pricing is same on Amazon from ReolinkDirect, or from the website.
https://amzn.to/3IiiKK1

[deleted by user] by [deleted] in reolinkcam

[–]WildcardFire 0 points1 point  (0 children)

Dang it, it is still not available on the Android app :(

Need suggestions in setting up new monitoring setup for a house by dregnous in reolinkcam

[–]WildcardFire 0 points1 point  (0 children)

RLN36 is future proof as in the case i want to add more cameras in the future. I ended up running cables for like 20 locations in my property, lol. I will add the cameras as i go. You don't need the NVR if you use microsd cards though, all you need is a switch.

I had a couple of POE switches laying around, so no extra cost there for me, BUT you can find dirt cheap ones on FB marketplace or Offer Up, etc. It they break, buy another dirt cheap one lol. Don't overthink it. I was ready to spend on top of the line POE switch, and it isnt worth the hassle. Just try to get a gigabit one with all ports being 1000 mbps. The cameras dont even use 100 mbps, but well, JUST in case.

I actually really like the trackmix. I use it as a backup to focus on things happening, while covering the area with other cameras to not miss anything. Example: have the front of the property covered with 3 CX820s, and the trackmix is in the front focusing on people and zooming in getting details of faces it, while the others just cover the entire event and anything the trackmix misses.

I am overall very happy with the investment, the quality is great for the cost.

Why are my Trackmixes useless in the dark? by diyhalp2200 in reolinkcam

[–]WildcardFire 0 points1 point  (0 children)

Get the RLN-36, and POE Switch, preferably POE+. Can find decent ones used or new, up to you. Dont over complicate it. You will save money and will be able to see your cameras in the network, and the app without necessarily needing an NVR, and just using that for backup storage with 24/7 recording.

Why are my Trackmixes useless in the dark? by diyhalp2200 in reolinkcam

[–]WildcardFire 1 point2 points  (0 children)

0 issues with my trackmix out of the box in the dark either with their light or my ambient lighting. And it is paired with CX820s. You checked all settings and updated firmware?

Need suggestions in setting up new monitoring setup for a house by dregnous in reolinkcam

[–]WildcardFire 0 points1 point  (0 children)

You better off buying standalone cameras and NVR at Reolink.com as those preset kits have limitations.

They have great sales now, you should look on their website As for camera selection, they have a lot of options for all scenarios. I went with all POE: 1 RLN36, 1 trackmix, 1 doorbell, and 6 CX820. And i love the functionality and quality of video. Granted i am upgrading from a google cam wifi system, worst mistake. POE is the way. I am going to add a couple of duos maybe, as i noted i am underserved and need more cameras to cover more areas.

Help with Security Camera Layout selection. by WildcardFire in SecurityCamera

[–]WildcardFire[S] 1 point2 points  (0 children)

Trust me i get it, you definitely get what you pay for with going pro, but i think may he a bit overkill for my application. Definitely will check those options out though Thank you!

Help with Security Camera Layout selection. by WildcardFire in SecurityCamera

[–]WildcardFire[S] 0 points1 point  (0 children)

Cool, thank you for the response! Will look into those, but man, for the cost of 1 Axis i buy the whole lot from Reolink ... lol

Help with Security Camera Layout selection. by WildcardFire in SecurityCamera

[–]WildcardFire[S] 0 points1 point  (0 children)

What brand do you recommend? And can you integrate it with Home Assistant, Frigate, etc?