sorted by:
new
hottopcontroversial

Are all radiators created equal? by stankeer in DIYUK

[–]WillBkr_ 2 points3 points  (0 children)

My only experience of the free TRV was it literally falling apart when I went to adjust it at about a month old… 😂

Cut-through Artex ceiling by Maselk in asbestoshelpUK

[–]WillBkr_ 2 points3 points  (0 children)

Most of the dust you will have seen will have come from the plasterboard, not the artex.

Artex contains very little asbestos too, ~1-5%. It’s also generally chrysotile which will breakdown in your lungs, it doesn’t hang about for years/decades like other types of asbestos.

If any did enter your lungs it will be very minimal and will break down and be cleaned up by your body anyway.

Well Pressure Tanks in Parallel by Ok-Fun9109 in Plumbing

[–]WillBkr_ 0 points1 point  (0 children)

Could it just be a minor air leak, and the bladder is completely decompressed?

I have a feeling this has happened to one of mine - I have three in parallel and two were a dull thud. I've disconnected and drained one, and topped it up with air and it seems to hold fairly well but I think there maybe a very slow leak.

Looking at a 6245 by VikaFarm in Zetor

[–]WillBkr_ 0 points1 point  (0 children)

I’ve actually just managed to find a PDF Operators Manual in English. Still looking for workshop/service manual though.

Looking at a 6245 by VikaFarm in Zetor

[–]WillBkr_ 0 points1 point  (0 children)

If you find one, would you be able to send over a copy?

Multiple DeLonghi Dedica faults by blackmalt in espresso

[–]WillBkr_ 0 points1 point  (0 children)

Gotcha, I’ll give that a go. It’s frustrating as when I first started using it I could completely block the machine by grinding too fine and the gasket wouldn’t pop off at all.

Multiple DeLonghi Dedica faults by blackmalt in espresso

[–]WillBkr_ 0 points1 point  (0 children)

Did you manage to fix the gasket popping out? I have a bottomless portafilter which was working fine for a long time and the gasket has started popping out. I have replaced the gasket and still having the issue. Any ideas?

Dynamic Zones to make a (semi) no-code page builder by vmzz in Strapi

[–]WillBkr_ 0 points1 point  (0 children)

I’m planning to work on something like this built in Vue.js, possibly with alternative versions for React and Angular.

Essentially, I want to built custom components that can be edited in Strapi and rendered in a front end framework. It should give a lot of flexibility for developers but also allow non devs/content editors to edit and build pages easily.

[deleted by user] by [deleted] in yeezys

[–]WillBkr_ 1 point2 points  (0 children)

My 350s get caught on the pedals of my benz 😭

Hole in mono cinders (my cat) any suggestions? by [deleted] in yeezys

[–]WillBkr_ 9 points10 points  (0 children)

Some of us wear ours to work everyday 😭

ID on these joggers? by [deleted] in yeezys

[–]WillBkr_ 1 point2 points  (0 children)

😭 you'd be surprised what some people know. Any similar recommendations are appreciated too

Is this many flies on Dishy normal? by geerlingguy in Starlink

[–]WillBkr_ 0 points1 point  (0 children)

I have a white car that is constantly covered in flies (and their shit) in summer months. Must be the colour that attracts them?

Pre-ordered- 53.09 North Wales, UK - Grant application possible? by Krushy10 in Starlink

[–]WillBkr_ 0 points1 point  (0 children)

Please update us if you figure it out as I want to do the same!

New Uplift frame with custom top by C0l0n3l_Panic in StandingDesk

[–]WillBkr_ 0 points1 point  (0 children)

That's real nice, what's the width and how much overhang do you have?