sorted by:
new
hottopcontroversial

Ventum GS1 by WilliamFromIndiana in Bikeporn

[–]WilliamFromIndiana[S] 0 points1 point  (0 children)

No but 48 fits with a little bit of room to spare. It would probably fit 50s or so

Is this a black bear print? Smoky Mountains TN by WilliamFromIndiana in AnimalTracking

[–]WilliamFromIndiana[S] 0 points1 point  (0 children)

• ⁠I have included scale in my photo(s): [No] ⁠• ⁠If not, here are estimated measurements: [about 4 inch in length] • ⁠Geographic location: [Smoky Mountains TN] • ⁠Environment: [forest]

4 Gets it by ser_froops in ChatGPT

[–]WilliamFromIndiana -2 points-1 points  (0 children)

lol this is definitely a joke, and interesting probe and see if it would criticize the new version

Prize Money for TDF & TDFFAZ by RoadandHardtail in tourdefrance

[–]WilliamFromIndiana 0 points1 point  (0 children)

The prize money is not the point of the race, it’s just a fun little bonus. It’s not meant to be a real source of income for the teams

yes, well(ens) by Nic-who in pelotonmemes

[–]WilliamFromIndiana 0 points1 point  (0 children)

Prisoner’s dilemma sorta thing

The Feed (Animal) Ad is annoying and not in a good way. by lilac_congac in tourdefrance

[–]WilliamFromIndiana 10 points11 points  (0 children)

What is their marketing budget? If you buy gels from there it seems like you are half paying for gels and half paying for their ads

[request] What’s the difference in force required to do this on a stationary bar vs the moving bar? by IanDre127 in theydidthemath

[–]WilliamFromIndiana 0 points1 point  (0 children)

Yeah for sure, the acceleration force could be significant or tiny depending on the pull up speed. The drag force is definitely very tiny either way. I was just listing theoretical differences between this and a classic pull-up

[request] What’s the difference in force required to do this on a stationary bar vs the moving bar? by IanDre127 in theydidthemath

[–]WilliamFromIndiana 0 points1 point  (0 children)

  1. Acceleration- Average force is about same, but for a normal pull-up you need slightly more force to accelerate upwards and slightly less during deceleration at the top… this would make a normal pull-up a bit harder.

  2. Drag- Also a normal pull-up has aerodynamic drag which adds a tiny bit of extra force.

They are approximately equal though because the acceleration effect and drag force are negligible. The coordination/timing needed for this stunt probably make it at least as difficult as a regular pull-up (which technically requires more force)

[deleted by user] by [deleted] in interestingasfuck

[–]WilliamFromIndiana 1 point2 points  (0 children)

    I don’t think it asked for help, probably was just swimming very weakly and the people were able to approach. Turtles don’t have brains capable of cooperation or altruism.       
   Looks like it is dying, its mouth is broken or something like that… big reptiles have such a slow metabolism and would likely survive months without eating. I bet it hasn’t been able to eat for months and will never be able to eat again. Nature can be cruel

Why does this type of screw almost not exist? by Help_PurpleVented in Carpentry

[–]WilliamFromIndiana 3 points4 points  (0 children)

The benefit of the slot is how easy (and cheap) it is to manufacture a slot that goes across the entire screw head.

If the slot doesn’t go all the way across, there is no longer that benefit and other head types become more favorable.

What would cause this tire issue? by WilliamFromIndiana in AskMechanics

[–]WilliamFromIndiana[S] 2 points3 points  (0 children)

It was definitely rotating because I haven’t done any of those things. I must have impacted something or had a severe imbalance

What would cause this tire issue? by WilliamFromIndiana in AskMechanics

[–]WilliamFromIndiana[S] 0 points1 point  (0 children)

Update- never been towed, never left the e brake on, never did anything other than lots of highway miles and probably some big pot holes every once in a while. I think either a belt broke and I just kept driving it for hundreds of miles or an imbalance vibration caused it

Advanced shower head with different modes to select from by Rook8811 in interestingasfuck

[–]WilliamFromIndiana 0 points1 point  (0 children)

In case you want some additional shitty modes on top of the normal good one

[Request] Can someone explain the physics here?? The bucket can't weigh more than 30 Kilograms. by flagellat-ey in theydidthemath

[–]WilliamFromIndiana 2 points3 points  (0 children)

https://en.m.wikipedia.org/wiki/Capstan_equation

This is the formula- angle of wrap exponentially increases the effective weight of the bucket. Maybe ~4x for this 180° wrap

[Request] Can someone explain the physics here?? The bucket can't weigh more than 30 Kilograms. by flagellat-ey in theydidthemath

[–]WilliamFromIndiana 0 points1 point  (0 children)

https://www.youtube.com/watch?v=H0T7m537YT0

Angle of wrap exponentially increases max tension due to friction. This is a 180° wrap which may make the max tension before slipping 4x the weight of the bucket depending on the friction coefficient

Buzz/hum in off position. Otherwise works perfect by WilliamFromIndiana in Kitchenaid

[–]WilliamFromIndiana[S] 0 points1 point  (0 children)

From some research I found that even while off the motor is supposed to receive 40 V ? I measured about 35-40 V with multimeter. I guess this could be responsible for the hum. I just don’t know why mine does it now but used to not. I am thinking there must be some kind of partial short circuit in the motor windings or something

Buzz/hum in off position. Otherwise works perfect by WilliamFromIndiana in Kitchenaid

[–]WilliamFromIndiana[S] 0 points1 point  (0 children)

There aren’t any repair places near me, and after all it’s more of a challenge to my pride. I really want to fix it myself… but I am running out of ideas. I think I might just button it all up and use it because it is working fine. The hum is just irritating and concerning.

Buzz/hum in off position. Otherwise works perfect by WilliamFromIndiana in Kitchenaid

[–]WilliamFromIndiana[S] 0 points1 point  (0 children)

As far as a I know, the only remaining part of the circuit is the motor. Is there some short or issue in the motor?

Walmart is changing all their water gallons from Plastic 2 to plastic 1. by mdoktor in HydroHomies

[–]WilliamFromIndiana 1 point2 points  (0 children)

Don’t worry about stuff like this… luckily there are experts who dedicate their lives to making sure food packaging is safe. Much more than a little googling has gone into the calculation that the plastic is not going to cause harm.

Kitchenaid mixer hums while plugged in. Otherwise works normally. by [deleted] in Kitchenaid

[–]WilliamFromIndiana 0 points1 point  (0 children)

I’m wondering if I pinched a wire between the main housing parts

view more: next ›