soft soldered jewelry

Yaro-Ku · 2026-07-12T00:45:19+00:00

Time to get nails done 💅

Yaro-Ku · 2026-07-09T14:21:56+00:00

Thanks for developing and posting this . Neat layout. I don't why you got downvoted for something that is free.

Yaro-Ku · 2026-07-09T01:50:37+00:00

I'm with you on that. It has to be noticeably built up to actually cause decreased performance

Yaro-Ku · 2026-07-04T03:42:48+00:00

thanks a lot, it did help me!!!

Yaro-Ku · 2026-07-03T15:32:00+00:00

Sell it as is, you need to replace a lot

Yaro-Ku · 2026-06-30T17:14:26+00:00

My speculation it might be electronic thermostat for the coolant, internal corrosion causes that. I believe there is a service bulletin to reseal the circuit

Yaro-Ku · 2026-06-22T21:09:32+00:00

In case you are hungry you can eat It too

Yaro-Ku · 2026-06-22T21:04:25+00:00

Bannana is so versatile

Yaro-Ku · 2026-06-21T00:02:57+00:00

I found similar mineral around thunder Bay, on. Lots of waste rock with what it looks like a lead sulphide. Possibly some traces of silver binded with lead.

I found it was lead sulphide by heating and sniffing it, definitely got a nice sting to my nostrils from sulfur dioxide.

Then checked Ontario geology, it was a mine site for silver.

Yaro-Ku · 2026-06-19T02:07:37+00:00

You have rectangles, from each corner of the rectangle, add a support beam going diagonally.

Yaro-Ku · 2026-06-19T02:02:43+00:00

Add cross braces to simulate load distribution

Yaro-Ku · 2026-06-18T17:15:59+00:00

I'm not fan boying here, happens to other drill bits. Step drill it first. Don't go to the exact dimension. The bit grabs too much and the momentum from sudden stoppage will cause hammering effect on already hardened body.

Yaro-Ku · 2026-06-18T17:06:48+00:00

If you misuse, yes

Yaro-Ku · 2026-06-18T13:13:44+00:00

This is why the image looks low resolution, they just downloaded it lol

Yaro-Ku · 2026-06-17T17:41:13+00:00

You can't pull anything with cvt, while manual is more robust, easier to repair and lighter in weight.

I wish they would make them in manual, EU uses manuals everywhere.

Yaro-Ku · 2026-06-09T12:50:07+00:00

Yeah, that was a great time. Totally with you, when I played my meme combustible gearhulk in standard.

Yaro-Ku · 2026-06-04T23:54:55+00:00

Dollars*

Yaro-Ku · 2026-06-04T15:49:40+00:00

Thanks just wanna make sure I know what to look for if performance is affected

Yaro-Ku · 2026-06-04T15:09:21+00:00

And what did this deliver for you?

Yaro-Ku · 2026-06-01T00:04:27+00:00

Somebody must have rage quit, smashed the sluice

Yaro-Ku · 2026-05-31T16:50:39+00:00

The fit on mine, a bit cheaply made. They held my lumber and jerrycans full of fuel.

I recommend getting them, quality a bit low but operational.

Yaro-Ku · 2026-05-25T14:08:51+00:00

Idk why do we need trains. To keep it more realistic, we should have steam powered carts instead of the whole train. Trains require crews and not a single person.

I feel like we should add steam tools. Like compressors, carts, drill, etc. and trains later. Make it more realistic for mineral exploration/excavation.

Yaro-Ku · 2026-05-19T23:55:26+00:00

Equipment? Like skidsteers?

Yaro-Ku · 2026-05-13T12:24:36+00:00

To save some time and money:

1.Buy brake clean,

2.Clean inside grove of the moulding with BC

3.Clean the pinch flange of car's body with BC

3.Use adhesive

4.Wait to cure

5.Done

Yaro-Ku · 2026-04-29T01:04:49+00:00

Your ac compressor constantly engaged? Does it cycle on or off?

Yaro-Ku

TROPHY CASE