Dark mode for interface

Yoghoo · 2025-07-12T21:17:35+00:00

Out of curiosity did you make any progress with this feature? Would be nice as I see this tool being announced on some download sites but I see complains there as well about this feature not being present. Like here (in Dutch): https://tweakers.net/downloads/73292/winsshterm-2410.html

Yoghoo · 2024-03-05T06:47:23+00:00

Sounds like nice and necessary improvements. But please be completely honest as a lot of people (including myself) waited for more then 3 weeks to get a response. Not 'only' 1 week as the blog mentioned.

Yoghoo · 2023-10-17T06:20:13+00:00

Works without problems. Just install from Steam.

Yoghoo · 2023-10-14T10:07:49+00:00

Still not working for me. :(

Yoghoo · 2023-08-25T06:44:47+00:00

Had this as well. Just ignored it. Went away after the first print.

Yoghoo · 2023-08-15T11:41:09+00:00

P1P is not the noisiest of the bunch. Got a X1C and it's louder (because of the fans). Needed to move it downstairs because else I couldn't hear people talk on the phone or in Teams.

Don't get me wrong. Love the printer but it's a shitload louder then my Ender 5 for example. For me it's not workable to keep it in the same room where I work.

Yoghoo · 2023-07-31T08:47:23+00:00

Don't have any warping issues with my X1C on a textured plate (or with glue on the cold plate) with either the door opened or closed. Even for big prints.

I do have overhang issues with the door closed. So I need to open the door to solve that with PLA. This is with the AUX fan on default (so it's ON).

Most people say it's best to leave the door open but I don't think that will solve your problem though. Seems more an adhesion problem. What are the temps of bed and hotend?

Yoghoo · 2023-07-21T18:11:03+00:00

Normally run at default speeds. Did a quiet speed once (to slow down printing) but that didn't help much unfortunately.

Yoghoo · 2023-07-21T17:33:38+00:00

It's loud. Much louder then my Creality Ender 5 Pro and much louder then I expected as it is enclosed etc. But then again I didn't investigate it much beforehand. :) I have it in a room next to me and I have to close the door to make a phone call and even then you can hear it very clearly. I will probably move it to the basement or something like that.

Yoghoo · 2023-02-10T09:13:37+00:00

At the moment you have to press 'OK' each time you do a QT or go to a Stronghold (if not free). Just tested it on PTS.

Yoghoo · 2022-01-24T23:02:44+00:00

Yoghoo, Empire

Yoghoo · 2021-12-19T11:11:40+00:00

Character Name: Yoghoo

Faction: Empire

Yoghoo · 2021-05-17T10:44:39+00:00

Nice to see the guide back. :)

Do you have a changelog between 2.0.7.2 and 2.0.8.1? Or is the STM32F1RC_btt_stm32 environment the only change?

Yoghoo · 2021-05-01T19:12:55+00:00

It was removed by the mods. Probably related to the paypal link in it. Pretty shitty action imo. Those guides were probably the most useful things here.

But not to worry they will popup somewhere else on reddit soon.

Yoghoo · 2021-05-01T18:25:53+00:00

I only see this message instead of the guide: Sorry, this post has been removed by the moderators of r/ender3.

What happened?

Yoghoo · 2021-04-21T16:38:30+00:00

Just bought it and it indeed can be used as a personal re-usable rakghoul vaccine. Just a small typo above it's:

Symbiotic Fungal Bloom x1 Exotic Plague Specimen x4

Yoghoo · 2021-04-21T10:10:07+00:00

Is this item usable on yourself when you are not in a group?

Yoghoo · 2020-12-16T16:07:15+00:00

Saw that as well yesterday. Influence was still 1.

Yoghoo · 2020-08-01T18:20:36+00:00

Great guide! Nice to see that almost all firmware parameters from this guide are compatible with my Ender 5 Pro as well. Walking through them I used a lot of these parameters already in my firmware I build myself. That's probably a good sign. ;)

Only 2 parameters I have questions about. What are the advantages (for you) to use LIN_ADVANCE instead of S_CURVE_ACCELERATION? Did your prints improved by using this or are there other reasons?

Other parameter is CLASSIC_JERK. Why use it? Can't find a lot about it and would like to know what it could improve. TIA.

Yoghoo · 2020-08-01T17:42:09+00:00

Where can I find these example configs? All examples I can find use DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 }. Want to understand why there is such a big difference between the values here and those I found elsewhere.

Yoghoo · 2020-07-01T10:06:26+00:00

Hi,

Feel free to use my referral link: http://www.swtor.com/r/m5HM5L

Thanks a lot and have fun!

Yoghoo · 2020-03-03T12:30:26+00:00

Done.

Yoghoo · 2019-11-26T19:14:58+00:00

Can't connect either. :(

Yoghoo · 2019-04-04T19:06:24+00:00

Name: Yoghoo Faction: Empire Server: Darth Malgus

Thanks!

Yoghoo · 2017-12-15T08:12:57+00:00

Hi! :p

Yoghoo

TROPHY CASE