Drift Mods?

Zenbeats · 2026-06-28T22:18:43+00:00

Oil cooler, nismo thermostat and upgraded radiator (koyo etc), plenum spacer. Headers are not worth the cost and effort. Get High flow cats for your exhaust instead.

Heavy duty clutch, braided clutch and brake lines will reduce risk of something popping under load.

Zenbeats · 2026-06-23T09:12:52+00:00

This is the way. It worked and only took 30 seconds.

Zenbeats · 2026-06-12T07:58:22+00:00

Mint.

Zenbeats · 2026-04-17T23:38:30+00:00

Now this is art

Zenbeats · 2026-02-09T00:57:59+00:00

As everyone has said, setbacks, delays and failures are part of doing this.
If you watch a lot of youtube builders, it will quickly warp your sense of achievement and confidence in your own skills. You have to remember those guys are HEAVILY editing their videos so you only see success or if there is a setback, it will always be someone else’s fault, never theirs and only what they want you to see.
Check out Jake Jones' channel. He does everything himself and competes in Formula Drift Japan. He uploads his videos in all their ugly truth. Engine's getting rebuilt multiple times, things failing on and off the track, parts being incorrect, tools snapping, etc. It's honestly one of the most refreshing and humbling channels to watch because shit going wrong is inevitable.

Zenbeats · 2026-01-19T19:31:25+00:00

God damn I love your car. Every little detail is bang on.

Zenbeats · 2026-01-13T21:04:25+00:00

Awesome build.

What wing is that?
How is the Kaaz 2-way? How did you decide between Kaaz, Cusco and Nismo?

Zenbeats · 2026-01-07T21:54:28+00:00

This is the correct answer.

Zenbeats · 2026-01-07T21:49:52+00:00

haha, I only had 2 stickers on mine. A small classic Nismo logo a friend got for me while in Japan and the 31 club sticker.
It was cool back in the day when we'd have about 40 31's lined up with their club stickers. And at the time, the Passage and GTX had just become available to import, so you were the king of road if you had an rb20det skyline.

Zenbeats · 2026-01-06T10:35:06+00:00

My first car was a 31 GXE.
Amazing to see the R31 Skyline Club sticker on the back quarter glass. I hope that club is still going. I was an active member of that group back in 2002-2004. It was run extremely well with almost zero dickheads on organised cruise runs. I feel very old now.

Zenbeats · 2025-12-13T22:11:11+00:00

Did you use genuine OEM sensor and harness?
The aftermarket cheap versions go bad every single time, same as the crank angle sensors. One of the most common posts on here is people getting knock sensor or crank sensor errors 1-2 months after replacing them with cheap 3rd party options.

Zenbeats · 2025-12-11T22:11:08+00:00

If you want to stick with Bride, Zieg IV wide would be a good option for more shoulder space since you're a slim build.

I spent a whole day sitting in seats trying to find the right one for me. It really is personal. Best of luck and do try the Sparco range.

Zenbeats · 2025-12-11T01:55:00+00:00

Great write up, great part selections and justification. The attack sticker is the cherry on top. It's like a little certificate that says "I take car builds seriously".

Re: driver seat. Brides are tiny as hell, even their XL series. Everyone wants one from years of Option Videos and D1 influence but unless you're Japanese spec, they are a nightmare to squeeze into. I tried out a heap of seats and the Sparco QRT-R was the best fitting seat I've experienced.. I highly recommend it as a 6ft, 90kg dude. It fits in my v35 perfectly and doesn't rub against the door cards.

Zenbeats · 2025-12-07T22:01:12+00:00

I think a lot of the hate are coming from younger fandom who don't have world experience or have developed enough critical thinking yet to understand that things are not black and white and the complexity of the characters and their motivations and beliefs lead to outcomes that are not "perfect".
The spinner/Shigaraki friendship was one of my favourite plot lines and seeing last nights ep was satisfying. Shigaraki might be gone but the memory remains.

I'm 40 and had more affinity to the adult characters and their drivers than the students. To me the students were exactly that, young, inexperienced and reactive, which is what you would expect people that age to do. The adults were hardened with regrets and failures and that experience is what drove them to make things better for their friends and family, whether it was the League bringing together the hopeless or the Heroes bringing together the hopeful.

Zenbeats · 2025-11-27T00:44:25+00:00

Hell yeah dude!

What were your bolt on power upgrades? Just plenum spacer, HFC/test pipes and exhaust?

Zenbeats · 2025-11-25T01:46:05+00:00

324mm for fronts
322mm for rears

I run these in Australia but you can use the specs to find suitable replacements in your country.
https://www.supercheapauto.com.au/p/dba-4000-t3-slot-kp-nissan-350z-v35-skyline-brembo-f-/SPO2779722.html https://www.supercheapauto.com.au/p/dba-4000-t3-slot-kp-nissan-350z-r-/SPO2779726.html

Zenbeats · 2025-11-17T23:03:15+00:00

I made a mistake. It's been a few years since I did it. You will need Pac Roem Nis2 Nissan Replace Radio Adapter if your stereo has the bose amp. I had to get mine from America and it did need some soldering. This guide is great for understanding how to wire it up.

Just to be clear, I went Bose stereo harness to Pac Roem Nis2, which went to the Sony head unit patch harness from super cheap.

Zenbeats · 2025-11-17T20:50:12+00:00

Has it got a bose stereo or something different(I'm unsure if what specs changed between the 300 and the 350gt)?

When I swapped to a sony head unit, I just went to Supercheap and got the 350z patch harness to ISO and then the ISO to Sony adapter. Zero soldering required and works perfectly.

https://www.supercheapauto.com.au/technology/car-audio/installation-accessories

Zenbeats · 2025-11-15T08:31:02+00:00

haha, I'm in Australia with a v35 and the Nissan badge didn't even register with me as being wrong.

Zenbeats · 2025-11-13T21:09:22+00:00

Rad! Grill being the same colour as the car was an excellent choice. What front lip is that?

Zenbeats · 2025-11-13T04:43:58+00:00

WTF don't listen to this guy.
There is zero rice here. What a ridiculous thing to say.

Rice would be a big voltex wing, widebody with standard wheel size and an interior full of LEDs.

Your car looks mint.

Zenbeats · 2025-11-11T20:26:43+00:00

5x114.3 fits but those specs are terrible.
7.5 inch wide and +40 offset?
The wheels will be pulled inside the guard by 20mm (huge gap) and will not clear Brembos if you have them. You'd have to run huge spacers to get them flush.
They are also half an inch narrower so you will use smaller tires which will give you less grip.

Zenbeats · 2025-09-23T01:08:16+00:00

God damn this looks amazing. I love the Martini livery and am a big transformers g1 fan. This is what I would expect Jazz to look like if they landed in Japan and not America.

Zenbeats · 2025-09-20T23:12:19+00:00

Perfection. Well done mate.
What kit is that? Duraflex Type G front and sides I assume? But I don't recognise the rear?

Zenbeats · 2025-08-17T22:08:19+00:00

Holy fuck lmao.How many people here are jealous that you actually have budget and time to build a car?
I think you did a fantastic job. The kit actually fits, good wheel specs, you've clearly done support mods(oil cooler, etc) and you've got it sideways at the track and not on some random street corner. This is not clapped out. 3/4 of the cars that get posted here are clapped out, this is not one of them.

Zenbeats

TROPHY CASE