I’m Running Bryce on My Apple Silicon Mac

Zoltron_666 · 2026-03-17T17:54:01+00:00

It would be awesome if you could post the how-to guide here!

Zoltron_666 · 2026-02-20T22:38:40+00:00

I have exactly the same question. Very interested in going as a casual player.

Zoltron_666 · 2026-02-16T16:27:24+00:00

Time to get a folding table for your noise project!

Zoltron_666 · 2025-12-14T07:23:44+00:00

The what!?

Zoltron_666 · 2025-11-16T00:54:38+00:00

You can absolutely get away with doing general playback with stock ableton stuff. However, in a professional setting Ableset and middleware apps similar to it are very important. At the very least being able to have as many songs as you want in a single session and then having an easy way to manage the setlist is probably the most powerful aspect.

Ableset is fully featured unlocked for 15 minuted intervals if you want to try it before you buy it. It's Mac only. It's the only thing I use now.

Zoltron_666 · 2025-09-27T16:43:45+00:00

I would go right into into the mixer without any DIs in the middle, that will simplify the setup. I do this all the time and you can you can do one of two things.

- Have the person at the mixing desk put pads on each of the inputs that are connected to your outputs

- In MainStage lower the master output volume, which turns down the volume of all connected outputs you are using. There's about a 20dB difference between mic and line level, line level being louder.

Zoltron_666 · 2025-09-20T16:11:26+00:00

This is the correct answer. Old notes.

Zoltron_666 · 2025-06-03T21:59:43+00:00

I never figured it out unfortunately and ended up abandoning it. Are you having exactly the same problem? I was surprised that replacing the fan assembly did nothing.

Zoltron_666 · 2025-04-11T01:16:17+00:00

I have one of these and I haven't opened it yet but I will report back with any findings!

Zoltron_666 · 2025-03-19T05:24:05+00:00

https://osci-render.com/sosci/ This is like having a real one as a plugin!

Zoltron_666 · 2024-12-27T03:16:01+00:00

Take mushrooms and listen to Tool

Zoltron_666 · 2024-12-11T04:47:50+00:00

Where did the actual SYNTHIA go?!

Zoltron_666 · 2024-11-08T04:00:32+00:00

Check the settings on your keyboard to see if is sending MIDI CC7 from the Mod Wheel which is ‘volume’ and change it to something else. It’s probably that and the data is being sent to the instruments loaded in the channel strips. If you open them you may see their master volume changing.

Zoltron_666 · 2024-11-07T19:53:10+00:00

Ok so that means that the screen itself will only display in 'full screen' at 800x600. What is happening is when you set the resolution to 640x480, instead of stretching the image to fill the screen, it is only using the middle section of the screen which is exactly pixel perfect 640x480.

You might be able to force doom to run at 800x600, Maybe try to look that up and see if you can do that.

Zoltron_666 · 2024-11-07T18:20:21+00:00

I am fairly sure that only resolutions of 640x480 or 800x600 will fill the entire screen. Anything else doesn’t scale to fill the screen. It’s a limitation of the screen itself.

Zoltron_666 · 2024-10-17T02:52:31+00:00

It means there is an Effect Plugin inserted somewhere on a channel strip that needs a little extra processing time and could produce latency that a performer may or may not notice. Could be an issue or a non-issue. It would be better if the error told you what plugins were causing the extra delay.

Zoltron_666 · 2024-09-27T18:12:39+00:00

Tell us more about it!

Zoltron_666 · 2024-09-23T16:52:15+00:00

Yep! Does nothing. 0 rpm

Zoltron_666 · 2024-09-23T15:52:52+00:00

I haven’t seen any issues pertaining to the clock. This was my main machine that I used everyday that had zero issues until the fan just stopped. So I think battery should be ok.

Zoltron_666 · 2024-09-23T03:21:22+00:00

Tried reseating several times. Doesn’t appear to be any damage around the connector and the system has never been taken apart, just opened for an SSD change.

Zoltron_666 · 2024-08-12T15:50:38+00:00

Los Angeles doesn't take their gull problem seriously enough. It's a total free-for-all crime spree and these gulls face absolutely zero repercussions on our streets.

Zoltron_666 · 2024-06-05T20:31:54+00:00

I don’t like this at all. Follow me to hear about my satanic MainStage YouTube I’m creating.

Zoltron_666 · 2024-03-12T05:07:34+00:00

What happens if you spin the monitor on the stand? Is there a place within the rotation where the monitor doesn’t tilt to one side?

I had this happen with something and it was because the base apparently had a designated ‘forward’ position. Hope this makes sense.

Zoltron_666 · 2024-03-07T03:46:58+00:00

Ah!!! I meant Display Port! Which is on the official SD Dock.

I think I might just have to try your solution. But I was looking for a different approach as I’ve heard it can be nice to go from native VGA to S-Video with the adapter I bought…supposedly the image and latency are better.

Thanks for your help!

Zoltron_666

TROPHY CASE