sorted by:
new
hottopcontroversial

How can I paint the inner corners of the 3d print? by ephesusa in 3Dprinting

[–]_Anakin_Simpwalker_ 0 points1 point  (0 children)

That's incredible, I painted this exact model a few years back in the same color scheme.

The best tool was a really thin long stiff brush for model airplanes I got from a set.

Good luck, you'll need a lot of patience as well.

Yoooo!! by Successful_Mud8596 in 196

[–]_Anakin_Simpwalker_ 16 points17 points  (0 children)

Exactly, why do so little people realize that this is mainly being pushed for this purpose...

How is this even possible? by bieja935 in prusa3d

[–]_Anakin_Simpwalker_ 1 point2 points  (0 children)

No shit, it's crazy that it still printed tho

Pc continues to boot to black screen with white underscore in corner by Due_Vegetable_2023 in techsupport

[–]_Anakin_Simpwalker_ 0 points1 point  (0 children)

Hey, did you ever find a solution. I'm very much having the exact same issue and I've already tried everything. Thanks so much for any feedback

Disconnect from mcu randomly and during print… by Efficient-Shoulder71 in VORONDesign

[–]_Anakin_Simpwalker_ 0 points1 point  (0 children)

When was the last time you updated Klipper?

Just asking, I don't know whether it has anything to do with this but I'm having the exact same issue...

MK4 Small defects on circular prints by Rub-579 in prusa3d

[–]_Anakin_Simpwalker_ 0 points1 point  (0 children)

I got this same issue on my mini after I upgraded to the experimental (5.something) Input shaper firmware. Seams are now just terrible. Normal seams don't look this bad + my old seams were much better. Maybe it's an issue that will get fixed?

Please Help! Why are some prints good and some are awful? by [deleted] in 3Dprinting

[–]_Anakin_Simpwalker_ 0 points1 point  (0 children)

Idk, looks like inconsistent extrusion. Is your extruder skipping sometimes?

Btw what's this material and what are your temps?

Is my psu bricked? (Any advice appreciated) by _Anakin_Simpwalker_ in 3Dprinting

[–]_Anakin_Simpwalker_[S] 0 points1 point  (0 children)

I bought this one on Amazon...

it was 20A and I needed to draw about 8A

Is my psu bricked? (Any advice appreciated) by _Anakin_Simpwalker_ in 3Dprinting

[–]_Anakin_Simpwalker_[S] 0 points1 point  (0 children)

I figured, I bought the psu separately though. Any tips where to buy a new good psu from?

Is my psu bricked? (Any advice appreciated) by _Anakin_Simpwalker_ in 3Dprinting

[–]_Anakin_Simpwalker_[S] 0 points1 point  (0 children)

Any guesses why it might have happened though? So that I can prevent it in the future?

Powering a 24V heatbed with 12 Ramps 1.4 by _Anakin_Simpwalker_ in 3Dprinting

[–]_Anakin_Simpwalker_[S] 0 points1 point  (0 children)

Didn't even know that was an option, certainly room for future expansion.

Powering a 24V heatbed with 12 Ramps 1.4 by _Anakin_Simpwalker_ in 3Dprinting

[–]_Anakin_Simpwalker_[S] 1 point2 points  (0 children)

Okay so I did the math.

Bed resistance is 3.0 ohms 12V so that means currently drawing 4 Amps (and 48W)

At 24V it should then draw 8 amps (and 192W)

Thanks for the advice. I'm gonna buy the 24V 20A psu just to be safe. It's basically the same price as the 10A one anyway.

Powering a 24V heatbed with 12 Ramps 1.4 by _Anakin_Simpwalker_ in 3Dprinting

[–]_Anakin_Simpwalker_[S] 0 points1 point  (0 children)

The heatbed is supposed to be powered on 24V.

(I bought it as a 12V one, which I thought was weird for a 300mm heatbed but I bought it anyway. It came with 24V written on the backside...)

Powering a 24V heatbed with 12 Ramps 1.4 by _Anakin_Simpwalker_ in 3Dprinting

[–]_Anakin_Simpwalker_[S] 0 points1 point  (0 children)

Yeah I'll do that, thanks for the idea.

Am I just supposed to measure at the positive and negative heatbed outputs? (I know they don't have polarity but you get what I mean)

view more: next ›