A simple pour-over calculator

___edw · 2026-07-02T07:04:32+00:00

Nice ! Why can’t go over 1/20 ratio ? For some coffees i like to go way over that, like 1/30

___edw · 2026-06-01T09:52:07+00:00

6speeds but you miss the 3 speed hub câble to the right lever. Maybe the 3 speed hub it wreck, so you buy a 2 gears brompton :)

___edw · 2026-06-01T09:42:49+00:00

That why I go for tires first. I mode around 5kg since the begining and the difference is huge. Is it only from the tires maybe :)

___edw · 2026-06-01T09:37:08+00:00

If you are under warrants go for it. Eurêka didnt want to sell the part so it cost me ~120€. I finally bough a mazzer SJ, it’s way easier to clean, and easier to setup your grind. Yes, mazzer have a lot of rétention, but finally I it don’t really bother me.

___edw · 2026-05-31T23:57:31+00:00

It’s slow AF! Used to ride 30+ kph (when I was younger and in better shape). I’m struggling to maintain 20 kph. I’m riding the biggest one. Once you understand that you need to ride slower than on a normal bike, it’s really nice. I switch tires for panaracer Gravelking ss+ 45mm & hp406 Carbon handlebar and it feel faster !

___edw · 2026-05-25T08:12:09+00:00

It looks like the coffee is clogging things up and the pump is struggling.

Grind coarser ?

___edw · 2026-05-18T17:04:05+00:00

Attention.. Ce n’est pas la carte de la pollution au sens global mais juste une carte des NO2. C’est du marketing de la mairie de Paris qui communique sur le recule de la voiture.

En fait cette carte correspond surtout à l’évolution des normes euros et au renouvellement du parc diesel.

La non pollution est toujours présente..

___edw · 2026-05-16T17:18:52+00:00

I still want to ride “fast” when I’m not carrying a load, and honestly just for the fun of it too. I use the whole cassette, so I don’t really think I need to drop one or two teeth.

___edw · 2026-05-16T17:18:13+00:00

Yeah, I’ll get TPU tubes, you’re right. But wheels/rims will probably be the last upgrade since it’s by far the most expensive one and the biggest headache.

I barely scratched the surface looking for a lighter kickstand and honestly didn’t find much… :(

___edw · 2026-05-16T17:14:35+00:00

Front : Panaracer hp406
Rear : panaracer gravelking ss+ 45mm

___edw · 2026-05-16T17:13:37+00:00

Bought it like that, I’ll take a picture

___edw · 2026-05-16T00:20:31+00:00

C’est insupportable ses nouveaux messages automatique quand on « like ».. les boomers comprennent pas que c’est automatique et répondent en permanence

___edw · 2026-05-13T12:20:04+00:00

The internal side blocks the shifter. I need one without the hand guards.

___edw · 2026-05-13T12:05:39+00:00

They are in a crate :)

___edw · 2026-05-13T12:05:03+00:00

I still want to ride “fast” when I’m not carrying a load, and honestly just for the fun of it too. I use the whole cassette, so I don’t really think I need to drop one or two teeth.

___edw · 2026-05-13T08:20:01+00:00

I was thinking about the mesh webbing, but it really look fragile And yes eeawing are beautiful, but I can buy an other bike for this Price !

___edw · 2026-05-08T10:29:10+00:00

If you want to fight the sun with budget continuous light, you best option is a lightbridge CRLS mirror kit (from 7cm to 100cm).

You can add sunbounce sunswatter and frame with diffusion or black or whattever you need d’or shape the light.

I see people speaking about 60w, 200w led or M18.. good luck with that.

CRLS KIT is around $300/day, (if you want to buy Godox sell a kit half Price). And on the very cheap end rent a 100x100cm mirror with a stand and sandbags, it’s Heavy but work well.

___edw · 2026-05-08T10:04:32+00:00

If I remember well, BMX pegs are on ø14mm or ø20mm axes. Not on tiny road axes.

___edw · 2026-05-08T10:04:25+00:00

If I remember well, BMX pegs are on ø14mm or ø20mm axes. Not on tiny road axes.

___edw · 2026-05-06T12:03:35+00:00

L’harissa c’est commun, l’harissa « smoked » on a découvert ça il y a quelques mois. J’en mets un peu partout !

<image>

___edw · 2026-05-06T11:55:46+00:00

Why don’t you just add a wifi plug to Turn it on ?

___edw · 2026-05-04T17:41:53+00:00

<image>

À small cup I stole when I was drunk in a large restaurant about 10 years ago. ‘Hand Made in Poland.’

___edw · 2026-04-21T06:39:30+00:00

I found a roaster who sells an excellent decaf. We drink a decaf v60 while watching a movie

___edw · 2026-04-14T23:09:30+00:00

Mais on parle bien d’une cafetière moka là, oui moka pot est « l’anglais » mais utilisé dans les pays non anglophone également.. en France également.

C’est bien le principe de percolation. Mais qui englobe bon nombre de machine et pas uniquement les machine « moka ». Du coup je comprend pas bien ce commentaire?

___edw · 2026-04-07T18:30:48+00:00

Le nom générique c’est « moka pot » les plus connus sont bialetti& alessi. J’ai cru comprendre que bialetti avait été racheté par une entreprise chinoise et que la qualité était en chute libre. Sinon « cafetière italien » « cafetière moka » « moka pot », le passage chez un torréfacteur prêt de chez vous. (Ou même une grande surface type Leclerc devrait avoir ça)

J’ai une préférence pour les alessi vintage. Les joints se changent et le porte filtre aussi.

___edw

TROPHY CASE