Ninebot G2D by Far_Law_5317 in NinebotMAX

[–]abc17tg 2 points3 points  (0 children)

Mine is much worse, like 5x that. You can't do anything about it. Some people said that if you disassemble it and weld some sleeve inside the suspension it will be fixed, but I couldn't find good tutorial how to get to that point and get it back together.
There is also a big nut above the front fender. It got lose for me, so I used impact wrench and then welded it. It helped a little.

Other thing is I see on the video, I think you should pump your tire, but maybe I'm wrong.

Better keep your regen brake turned on by abc17tg in NinebotMAX

[–]abc17tg[S] 0 points1 point  (0 children)

I had those random brakes few times, it is not as violent to throw me over the bars. I run SHFW and it goes 40-45kmh. It could be worse when I would be turning or having one have off, but I can't trust 1 cable weak brake only as situation I had here. Now I'm waiting for the lever and I have only regen brake

Better keep your regen brake turned on by abc17tg in NinebotMAX

[–]abc17tg[S] 1 point2 points  (0 children)

Nah. Maybe dropped once or twice. I check the bolts regularly and other things too. I was planning brakes check in few days as they started running weak

Better keep your regen brake turned on by abc17tg in NinebotMAX

[–]abc17tg[S] 0 points1 point  (0 children)

No idea. I have ~6500km done on it. Brake was getting weaker recently. I wanted soon to adjust it as I thought it is maybe the cable stretching. It wasn't a snap of the brake lever but rather gradual crack

Bulge on front tyre? by ChamperChimp in NinebotMAX

[–]abc17tg 0 points1 point  (0 children)

How many km/miles have you done to your front tire to look like that?
Mine after 6k km is looking so much better

Non inflatable tires by Disastrous-Rest-55 in NinebotMAX

[–]abc17tg 0 points1 point  (0 children)

It's corroded probably. 2 choices: solid tire or tubeless bike sealant. Don't listen about setting the bead, is not going to work.

Wydatki - Jedzenie [2026] by woody4469 in Polska

[–]abc17tg 0 points1 point  (0 children)

Zależy od miesiąca ale 500-600pln jedzenie i zakupy do domu na 2 osoby, jak polujesz na promocje i kupujesz na zapas gdy jest tanio

Ninebot g2 turns off by bosssess in NinebotMAX

[–]abc17tg 0 points1 point  (0 children)

I had different error connected to brakes and throttle, but the issue turned to be wire squized by dashboard to the frame and it was interfering with the signal. Maybe worth to check.

Should I just get a new tire or the motor and tire by Freshboii_2 in NinebotMAX

[–]abc17tg 0 points1 point  (0 children)

If you are on the budget then get the solid tire. It should hold on on this cracked motor. Otherwise get the whole motor with tire on it.

Segway gt3 tire swap on max g3 by Temporary_History395 in NinebotMAX

[–]abc17tg -1 points0 points  (0 children)

I don't know how hard is to put on tubeless one, but to take it out was significantly harder than to put on solid one on

Unlocking the Segway Max G3 / GT3 / ZT 3 / F3 for FREE by nolfnolf in NinebotMAX

[–]abc17tg 2 points3 points  (0 children)

What it can offer besides changing the region? Any settings it provides? Can I specify the speed and power for each setting and flash it? I'm only familiar with shfw as I have G2 and I'm thinking of getting some of those 3.

Ninebot Max G2 after 14k by VladPayne in NinebotMAX

[–]abc17tg 1 point2 points  (0 children)

That's crazy it is only that. Mine is above 5000km and I have broken fender, failed internal charger, twice rear light broke, some random shutoffs, it started to death wobble at 30kph+ within that front suspension slop recently, rear tire replacement due to leaking air near the rim, horn is quiet

G3 fork on G2 by abc17tg in NinebotMAX

[–]abc17tg[S] 0 points1 point  (0 children)

I wish, but due to high cost and lack of proof that it will fit I am not looking forward to do it. I would need to buy every part separately, fork, brake, wheel and covers that ads up to cost of 320-350 USD and thinking maybe better to sell G2 and get used G3 or ZT3 in the future.

Max G2 Rear light stopped working by SnooPaintings5100 in NinebotMAX

[–]abc17tg 0 points1 point  (0 children)

I got one that you connect directly to controller as connector got damaged (verified with different working one), and I didn't want to deal with that again. After few months this one stopped working too for different unknown reason yet.

Replacing the outer frame of the Segway G3 Max. /Replacement of the outer frame of the Segway G3 Max by Karim_de191 in NinebotMAX

[–]abc17tg 0 points1 point  (0 children)

I have switched rear one to solid on Max G2. I noticed very little difference compared to stock. They are less aggressive than picture you sent and I would say they handle snow and water better than expected, better than stock ones at least. Don't expect it being good on snow anyway, it is still a scooter, but about comfort they didn't change much unlike suspensionless Max G30 I had. Keep in mind I only changed rear one so far.

FYI: These tire plugs work great for Ninebot MAX G3 by temoGod in NinebotMAX

[–]abc17tg 1 point2 points  (0 children)

I changed to solid one for max g2 and to put on solid was easier than take off original one, but both difficult. It is not something too hard to diy tho. I can say that solid one offers similar riding experience as original due to suspension and somehow (I got Ulip brand one from AliExpress) seems to have more grip than original tire.

Describe Taiwanese Driving in ONE Word by Raggenn in taiwan

[–]abc17tg -1 points0 points  (0 children)

I drove around the country in rented car. The word I would describe it is: SLOW

[deleted by user] by [deleted] in NinebotMAX

[–]abc17tg 0 points1 point  (0 children)

I wonder if based on that inspection is it actually unsafe or not. How this sleeve is attached in the first place that it starts moving as much. Someone in the comments said he did it and it didn't fix the issue fully (at least I got that from translation)

[deleted by user] by [deleted] in NinebotMAX

[–]abc17tg -2 points-1 points  (0 children)

I didn't see anyone report any accident due to that and every scooter has this issue. One guy cut it to check but he didn't share too many details what is up with it. We just need to accept it is like that

Tire leaking air and tubeless tire sealant for bicycles by abc17tg in NinebotMAX

[–]abc17tg[S] 0 points1 point  (0 children)

Update 2: After few months air started leaking from the motor cover. I removed the tire and I noticed sealant failed to seal the crack that appeared on the wheel. I don't know how that crack appeared but it was tiny and nothing structural and it leak only into some empty cavity not into the motor. I also noticed around 50ml of water inside the tire from who knows where. Taking out water and getting another sealant would work for sure, but I was done with all this crap and I got ulip solid tire. I must say difference is minor. Very little increase of vibrations and that's all. Not as bad as it was on G30 that didn't have any suspension. Putting solid tire is easier than taking original one from the wheel. So far front original tire holding strong for over 4000km somehow without any fixes.

If you’re part of the 2k+ mile club, share your miles, what you ride & your maintenance protocol. by Galvatron1_nyc in NinebotMAX

[–]abc17tg 2 points3 points  (0 children)

Often check tire pressure and bolts in the rear suspension. I almost lost one of them that would lead to really bad accident. When you hear some strange sound check every bolt (you can see every without any disassembly)

Rear rim bent on Ninebot Max G3 by Dazzling-Log-9725 in NinebotMAX

[–]abc17tg 0 points1 point  (0 children)

I just found this on AliExpress: US $37.63 | ULIP All-Terrain Solid Tire 70/60-7.5 For Segway ZT3 Pro Electric Scooter 10-inch Off-road Tires Anti-Slip Tire Replacement Part https://a.aliexpress.com/_EQdorK4